DeWalt DCD791, DCD796 Original Instructions Manual

Final page size: A5 (148mm x 210mm)

DCD791
DCD796

DeWALT

English (original instructions) 3

Copyright

B

Fig. A

DCD796

36

4

Fig. B

2

16

1

14

13

5

11

15

7

9

8

12

10

1011

1

Fig. C

17

18

Fig. D

3

Fig. G Fig. H Fig. I

Fig. E Fig. F

3

6

2

BRUSHLESS CORDLESS COMPACT 13 mm

DeWALT

DeWALT

DeWALT

DeWALT

DeWALT

DeWALT

DRILL/DRIVER, DCD791
BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER/HAMMERDRILL, DCD796

ENGLISH

Congratulations!

You have chosen a
product development and innovation make
most reliable partners for professional power toolusers.

tool. Years of experience, thorough

one of the

Technical Data

DCD791 DCD796
Voltage
Type
Battery type
Power output
No-load speed

1st gear min-10–550 0–550
2nd gear min-10–2000 0–2000

Impact rate

1st gear min-1— 0–9,350

2nd gear min-1— 0–34,000
Max. torque (hard/soft) Nm 70/27 70/27
Chuck capacity mm 1.5–13.0 1.5–13.0
Maximum drilling capacity

Wood mm 40 40

Metal mm 13 13

Masonry mm — 13
Weight (without battery pack) kg

Noise values and vibration values (triax vector sum) according to EN60745-2-1:

LPA (emission sound pressure level) dB(A)

LWA (sound power level) dB(A)

K (uncertainty for the given sound level) dB(A)

Drilling into metal

Vibration emission value a
Uncertainty K = m/s21.5 1.5

Drilling into concrete

Vibration emission value a
Uncertainty K = m/s2— 1.6

Screwdriving

Vibration emission value a
Uncertainty K = m/s21.5 1.5

The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

= m/s2<2.5 <2.5

h,D

= m/s2— 11.5

h,ID

= m/s2<2.5 <2.5

h,D

V

18 18

DC

1/10 1/10

Li-Ion Li-Ion

W 460 460

1.1 1.2

76 89
87 100

3 3

WARNING: The declared vibration emission level
represents the main applications of the tool. However if



the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.

An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.

Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.

EC-Declaration of Conformity

Machinery Directive

Brushless Cordless Compact Drill Driver/
Hammerdrill
DCD791, DCD796

declares that these products described under

Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010,
EN60745-2-2:2010.

These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
the following address or refer to the back of themanual.

The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of

Markus Rompel
Director Engineering

, Richard-Klinger-Straße 11,

D-65510, Idstein, Germany

22.06.2017

WARNING: To reduce the risk of injury, read the
instructionmanual.

at

.

3