Dewalt DCD776, DCD734, DCD771 User Manual

DCD734
DCD771
DCD776

Dansk (oversat fra original brugsvejledning) 3

Deutsch (übersetzt von den Originalanweisungen) 17

English (original instructions) 32

Español (traducido de las instrucciones originales) 45

Français (traduction de la notice d’instructions originale) 60

Italiano (tradotto dalle istruzioni originali) 74

Nederlands (vertaald vanuit de originele instructies) 88

Norsk (oversatt fra de originale instruksjonene) 103

Português (traduzido das instruções originais) 116

Suomi (käännetty alkuperäisestä käyttöohjeesta) 131

Svenska (översatt från de ursprungliga instruktionerna) 143

Türkçe (orijinal talimatlardan çevrilmiştir) 156

Ελληνικά (μετάφραση από τις πρωτότυπες οδηγίες) 170

Copyright DEWALT

2

Figure 1

c

d

f

e

Figure 2

b

i

a

DCD771

h

g

j

g

h

k

1

Figure 3

i

Figure 4 Figure 5

c

Figure 7

Figure 8 Figure 9

f

Figure 6

DCD776

c

2

ENGLISH

CORDLESS COMPACT 13 mm (1/2") DRILL/DRIVER/
HAMMERDRILL
DCD734, DCD771, DCD776

Congratulations!

You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.

Technical Data

DCD734 DCD771 DCD776

Voltage VDC 14.4 18 18
Type 1/10 1/10 1/10
Battery Type Li-Ion Li-Ion Li-Ion
Power output W 250 300 300
No-load speed

1st gear min-1 0–400 0–450 0–450
2nd gear min-1 0–1300 0–1500 0–1500

Impact rate
1st gear min-1 – – 0–7650
2nd gear min-1 – – 0–25,500

Max. torque
(hard/soft) Nm 38/22 42/24 42/24

Chuck capacity mm 1.5–13 1.5–13 1.5–13
Maximum drilling

capacity
Wood mm 30 30 30
Metal mm 10 13 13
Masonry mm – – 13

Weight (without
battery pack) kg 1.20 1.28 1.34

LPA (sound pressure) dB(A)
KPA (sound pressure

uncertainty) dB(A)
LWA (sound power) dB(A)
KWA (sound power

uncertainty) dB(A)
Vibration total values (triax vector sum) determined according to

EN 60745:
Vibration emission value ah

Drilling into metal
a

=

h,D

Uncertainty K = m/s²

69 72 85

3 3 3

80 83 96

3 3 3

m/s² < 2.5 < 2.5 < 2.5

1.5

1.5 1.5

Vibration emission value a
Screwdriving
a

Vibration emission value a
Drilling into concrete
a

The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.

WARNING: The declared vibration

An estimation of the level of exposure to

Identify additional safety measures to

=

h,ID

Uncertainty K = m/s²

=

h,D

Uncertainty K = m/s²

emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.

vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.

protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.

h

m/s²

< 2.5 < 2.5 < 2.5

1.5

1.5 1.5

h

m/s² –

– 14.0

–

– 2.4

32

ENGLISH

Battery pack DCB140 DCB141 DCB142 DCB143 DCB145

Battery type Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion
Voltage VDC 14.4 14.4 14.4 14.4 14.4
Capacity Ah 3.0 1.5 4.0 2.0 1.3
Weight kg 0.53 0.30 0.54 0.30 0.30

Battery pack DCB180 DCB181 DCB182 DCB183 DCB185

Battery type Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion
Voltage V
Capacity A

18 18 18 18 18

DC

3.0 1.5 4.0 2.0 1.3

h

Weight kg 0.64 0.35 0.61 0.40 0.35

Chargers DCB106 / DCB107

Mains voltage VAC 230 V
Battery type Li-Ion
Approx. charging time min 60 70 90 140 180

(1.3 Ah battery (1.5 Ah battery (2.0 Ah battery (3.0 Ah battery (4.0 Ah battery
packs) packs) packs) packs) packs)

Weight kg 0.49

Fuses

Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.

DANGER: Indicates an imminently

WARNING: Indicates a potentially

CAUTION: Indicates a potentially

NOTICE: Indicates a practice not

Denotes risk of electric shock.

hazardous situation which, if not avoided,
will result in death or serious injury.

hazardous situation which, if not
avoided, could result in death or
serious injury.

hazardous situation which, if not
avoided, may result in minor or

moderate injury.

related to personal injury which, if
not avoided, may result in property
damage.

Denotes risk of fire.

EC-Declaration of Conformity

MACHINERY DIRECTIVE

DRILL/DRIVER/HAMMERDRILL
DCD734, DCD771, DCD776

DEWALT declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-1,
EN 60745-2-2.

These products also comply with Directive
2004/108/EC and 2011/65/EU. For more
information, please contact DEWALT at the following
address or refer to the back of the manual.

The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D

EWALT.

Horst Grossmann
Vice President Engineering

EWALT, Richard-Klinger-Straße 11,

D
D-65510, Idstein, Germany

15.01.2014

33