DeWalt DC835KAR, DC825KAR User Manual

DC820
DC822
DC825
DC827
DC830
DC832
DC835
DC837
DC840

www .

.eu

DC845

Copyright DEWALT

2

Figure 1

c

d

Figure 2

g

a

h

i

h

b

i

j

k

l

Figure 3

A

B

1

Figure 4

Figure 5

Figure 6

d

c

f

e

m

2

ENGLISH

DC820, DC822, DC825, DC827, DC830, DC832, DC835,
DC837, DC840, DC845
CORDLESS IMPACT WRENCHES/DRIVERS

Congratulations!

You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
DEWALT one of the most reliable partners for professional power tool users.

Technical Data

DC820 DC822 DC825 DC827 DC830 DC832 DC835 DC837 DC840 DC845

Voltage VDC 18 18 18 18 14.4 14.4 14.4 14.4 12 12
Type 11 11 11 11 11 11 11 11 11 11
Battery Type NiCd/NiMH – NiCd/NiMH – NiCd/NiMH – NiCd/NiMH – NiCd/NiMH NiCd/NiMH

– Li-Ion – Li-Ion – Li-Ion – Li-Ion – –
No-load speed min
Impact min
Max. torque Nm 195 195 150 150 180 180 140 140 160 130
Tool holder 1/2" 1/2" 1/4" 1/4" 1/2" 1/2" 1/4" 1/4" 1/2" 1/4"

Square Square Hex Hex Square Square Hex Hex Square Hex
Max. bolt size mm M16 M16 M12 M12 M16 M16 M12 M12 M16 M12
Weight (without

battery pack) kg 0.98 0.96 0.98 0.96 0.96 0.96 0.96 0.96 0.96 0.96

DC820 DC822 DC825 DC827 DC830 DC832 DC835 DC837 DC840 DC845

LPA

(sound pressure)

K

(sound pressure

PA

uncertainty)

LWA

(sound power)

K

(sound power

WA

uncertainty)

-1

0–2400 0–2400 0–2400 0–2400 0–2400 0–2400 0–2400 0–2400 0–2400 0–2400

-1

2700 2700 2700 2700 2700 2700 2700 2700 2700 2700

dB(A) 91 91 90 90 91 91 90 90 91 90

dB(A) 3 3 3 3 3 3 3 3 3 3

dB(A) 102 102 101 101 102 102 101 101 102 101

dB(A) 3 3 3 3 3 3 3 3 3 3

Vibration total values (triax vector sum) determined according to EN 60745:
Vibration

emission value m/s² 9.7 9.7 13.7 13.7 9.7 9.7 13.7 13.7 9.7 13.7
Uncertainty K m/s² 2.3 2.3 5.3 5.3 2.3 2.3 5.3 5.3 2.3 5.3

The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.

WARNING: The declared vibration

emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission
may differ. This may significantly
increase the exposure level over the
total working period.

An estimation of the level of exposure to

vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.

Identify additional safety measures to

protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.

3

ENGLISH

Battery pack DE9180 DE9181 DE9503 DE9140 DE9502 DE9501 DE9141

Battery type Li-Ion Li-Ion NiMH Li-Ion NiMH NiMH Li-Ion
Voltage VDC 18 18 18 14.4 14.4 12 14.4
Capacity Ah 2.0 1.1 2.6 2.0 2.6 2.6 1.1
Weight kg 0.68 0.45 1.0 0.58 0.86 0.69 0.40

Charger DE9130 DE9135

Mains voltage V
Battery type NiCd/NiMH NiCd/NiMH/Li-Ion
Approx. charging time min 30 40

(2.0 Ah battery packs) (2.0 Ah battery packs)
Weight kg 0.52 0.52

Fuses:

Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs

230 230

AC

Defi nitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.

DANGER: Indicates an imminently

NOTICE: Indicates a practice not

Denotes risk of electric shock.

Denotes risk of fire.

hazardous situation which, if not avoided,
will result in death or serious injury.

WARNING: Indicates a potentially

hazardous situation which, if not
avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially

hazardous situation which, if not
avoided, may result in minor or

moderate injury.

related to personal injury which, if
not avoided, may result in property
damage.

EC-Declaration of Conformity

MACHINERY DIRECTIVE

DC820, DC822, DC825, DC827, DC830, DC832, DC835,
DC837, DC840, DC845

DEWALT declares that these products described
under Technical data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-2.

These products also comply with Directive
2004/108/EC. For more information, please contact
D

EWALT at the following address or refer to the

back of the manual.

The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of

EWALT.

D

Horst Grossmann
Vice President Engineering and Product
Development
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany

01.10.2009

4