Page 1
DM 10
Dynamic vocal microphone for speech and
backing vocals
User manual
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 19-09-2013 RV Revision date + author initials: 18-02-2014 RV
Page 2
Introduction
Thank you for purchasing this Devine dynamic microphone. Before you unpack all the received items,
carefully read this manual to become familiar with the functions of the microphone. Also check the contents
of the box to make sure all necessary parts are included.
If the microphone fails to operate properly, or if you have any problems while using it, disconnect it from your
mixer, active speaker or audio interface and contact your local dealer for more information and help.
Box contents:
- Devine DM 10 microphone
Warning!
- To avoid electric shocks, do not open the microphone housing. There are no user serviceable parts inside.
- Keep the microphone away from intense sunshine, humidity, dust and liquids
- Make sure the microphone is placed on a stable microphone stand while used
- To avoid interference, keep the unit and microphones away from devices like large power supplies, power
transformators, radarstations and computers.
Features:
- Dynamic microphone for vocal applications (Karaoke, speech, background vocals)
- Cardioid polar pattern
- Frequency range: 80 Hz – 16 kHz
- Robust construction, metal body and grill
- XLR connector
- Colour: black
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 19-09-2013 RV Revision date + author initials: 18-02-2014 RV
Page 3
Preparing and using the microphone
The Devine Pro DM 58 dynamic microphone is designed for recording and live playback of instrumental and
vocal sound. Thanks to the high quality capsule, this microphone is suitable for use with sound sources as
loud as 135 dB, without distortion or quality loss.
The uni-directional polar pattern (cardioid) makes sure that the microphone picks up most of the sound at the
front (on top of the grill). It also picks up some sound on the side of the grill. The rear of the microphone
(aiming at the connector) is the least sensitive, which is perfect for live applications where floor monitors are
used. This way, a feedback loop (high pitched noise when holding the microphone close to a speaker) can
be prevented when the microphone is set up properly.
Positioning of your microphone
Place the microphone as close as possible to the sound source to provide optimal audio quality. When using
the microphone for instruments, place them as close as possible, as this results in a sound with more low
frequencies and also prevents the need to increase gain on your mixer. When using the microphone with
vocalists, make sure they hold the microphone at the solid base, without blocking the microphone grill. Hold
a distance of +/- 15 cm between your lips and the microphone grill and experiment with the characteristics of
the sound. Do not place the microphone under your chin, or at your stomach, to make sure optimal audio
quality is guaranteed. When you need more low frequencies, experiment with a closer distance. When
blocking the microphone grill (for example by covering it with your hands), airflows of vocals can not be
released, which causes a cluttered sound and possible feedback problems.
NOTE: Never hold the microphone in front of any speaker which is in any way connected to the microphone,
as this creates an infinite feedback loop. Any damage caused by such actions is not covered by warranty.
Using the microphone to record sound of a guitar amplifier (or similar sources) is possible
Cleaning
When using this microphone with vocalists, you may want to clean the microphone once in a while. It is
possible to remove the top grill by turning it in counter-clockwise direction. Then, the grill can be sprayed with
disinfecting (but non-aggressive) solutions. Never spray any form of liquids directly onto the microphone
when the grill is still mounted, as this might have high impact on the microphone capsule.
Do not touch the microphone capsule or other components which are positioned under the grill, as this might
reduce the lifespan of the microphone. Always place the microphone grill back onto the microphone during
transport and use.
Protect your microphone:
This Devine microphone is equipped with very sensitive electronics to provide optimal audio performance.
Make sure the microphone is not exposed to severe shocks, collision, drops from high altitude or any
situations that may cause permanent damage. Improper use of the microphone is not covered by warranty.
Always transport the microphone in the original packaging, or in a flightcase with proper foam inlay.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 19-09-2013 RV Revision date + author initials: 18-02-2014 RV
Page 4
Troubleshooting
Problem Possible Cause Solution
No sound, or very low sound
signal
Volume set too low Increase incoming volume and
gain on your mixer, interface or
other sound processing device
Microphone positioned too far
away
Place the microphone closer to the
sound source
Rattling and cracking sounds Moist inside the microphone Let the microphone dry on room
temperature and avoid use of the
microphone in humid or moist
environments. Do not let the
microphone come in contact with
water or liquids.
Loud high frequencies coming
from the speakers
Microphone positioned too close to
the speakers, which causes
feedback
Move the microphone further away
from the speakers, or change the
position to prevent the microphone
to be aimed directly at the
speakers.
Interruptance of the microphone
signal
Loose cable or broken cable Check if the cable is plugged into
the microphone correctly. If that
does not solve the problem, try to
change the cable.
Distortion and/or noise in the
captured sound
Too much airflow caused by vocal
airflows
Use a pop filter (sold separately)
Too much airflow caused by wind
(outdoor use)
Use the windscreen (included)
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 19-09-2013 RV Revision date + author initials: 18-02-2014 RV
Page 5
Technical specifications
- Dynamic microphone for vocal and instrument applications
- Cardioid polar pattern
- Frequency range: 80 Hz – 16 kHz
- Robust construction, metal body and grill
- XLR connector
- Colour: black
- Dynamic microphone capsule
- Low noise
- Minimum feedback thanks to cardioid polar pattern
- Polar pattern: Cardioid (uni-directional)
- Sensitivity: -54 dB (+/- 3 dB. 0dB = 1V/Pa @ 1 kHz)
- Output impedance: 500 Ohms (+/- 30%, @ 1 kHz)
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0 Creation date + author initials: 19-09-2013 RV Revision date + author initials: 18-02-2014 RV
Loading...