DeVilbiss ProAir II P1015 Owner's Manual

A03203 5/25/04

ESPAÑOL . . . . . . . . . . . . . . . .21-40

Questions? 1-800-888-2468

READ AND SAVE THESE INSTRUCTIONS

Owner’s Manual

For

Model P1015

Home/Hobby Air Compressor

2- ENG

A03203

SAFETY GUIDELINES - DEFINITIONS

Indicates an

imminently hazardous
situation which, if not avoided, will
result in death or serious injury.

Indicates a potentially
hazardous situation

which, if not avoided, could

result in

death or serious injury

.

Indicates a potentially
hazardous situation

which, if not avoided, may

result in

minor or moderate injury.

Used without the

safety alert symbol
indicates a potentially hazardous
situation which, if not avoided, may
result in pr

operty damage.

This manual contains information that is important for you to know and understand. This information
relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you
recognize this information, we use the symbols below. Please read the manual and pay attention to
these sections.

IMPORTANT SAFETY INSTRUCTIONS

Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known (to the State of California) to

cause cancer, birth defects or other reproductive harm. Some example of these chemicals are:

●

lead from lead-based paints

●

crystalline silica from bricks and cement and other masonry products

●

arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, always wear MSHA/NIOSH approved, properly fitting face mask or respirator when using
such tools.

When using air tools, basic safety precautions should always be followed to reduce the risk of of
personal injury.

SAVE THESE INSTRUCTIONS

IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN
SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL
WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.

3- ENG

A03203

IMPORTANT SAFETY INSTRUCTIONS

Save these instructions

Improper operation or maintenance of this product could result in serious injury and
property damage. Read and understand all warnings and operation instructions before
using this equipment.

HAZARD

WARNING: Risk of explosion or fire

How To Prevent It

What Could Happen

It is normal for electrical contacts
within the motor and pressure switch to
spark.

If electrical sparks from compressor
come into contact with flammable
vapors, they may ignite, causing fire or
explosion.

Restricting any of the compressor
ventilation openings will cause serious
overheating and could cause fire.

Unattended operation of this product
could result in personal injury or
property damage. To reduce the risk of
fire, do not allow the compressor to
operate unattended.

Always operate the compressor in a well
ventilated area free of combustible

materials, gasoline, or solvent vapors.

If spraying flammable materials, locate
compressor at least 20 feet away from
spray area. An additional length of hose

may be required.

Store flammable materials in a secure
location away from compressor.

Never place objects against or on top
of compressor. Operate compressor in
an open area at least 12 inches away
from any wall or obstruction that would

restrict the flow of fresh air to the
ventilation openings.

Operate compressor in a clean, dry well
ventilated area. Do not operate unit

indoors or in any confined area.
Always remain in attendance with the

product when it is operating.

Always disconnect electrical power by
placing the Off/Auto-On to the "Off"
position and drain tank daily or after
each use.

4- ENG

A03203

WARNING: Risk of Bursting

Air Tank: The following conditions could lead to a weakening of the tank, and result
in a violent tank explosion and could cause property damage or serious injury.

How To Prevent It

What Could Happen

WARNING: Risk from Flying Objects

The compressed air stream can cause
soft tissue damage to exposed skin
and can propel dirt, chips, loose
particles, and small objects at high
speed, resulting in property damage or

personal injury.

Always wear ANSI Z87.1 approved safety
glasses with side shields when using the
compressor.

Never point any nozzle or sprayer
toward any part of the body or at other
people or animals.

Always turn the compressor off and
bleed pressure from the air hose and tank

before attempting maintenance, attaching
tools or accessories.

HAZARD

HAZARD

Drain tank daily or after each use. If

tank develops a leak, replace it
immediately with a new tank or replace
the entire compressor.

Failure to properly drain condensed
water from tank, causing rust and
thinning of the steel tank.

Modifications or attempted repairs to
the tank.

Unauthorized modifications to the
unloader valve, safety valve, or any
other components which control tank
pressure.

Never drill into, weld, or make any
modifications to the tank or its

attachments.

Excessive vibration can weaken the
air tank and cause rupture or
explosion

The tank is designed to withstand specific
operating pressures. Never make

adjustments or parts substitutions to
alter the factory set operating
pressures.

For essential control of air pressure, you
must install a pressure regulator and
pressure gauge to the air outlet (if not
equipped) of your compressor. Follow the

equipment manufacturers
recommendation and never exceed the
maximum allowable pressure rating of
attachments.

A

TTACHMENTS & ACCESSORIES:

Exceeding the pressure rating of air
tools, spray guns, air operated

accessories, tires, and other inflatables
can cause them to explode or fly apart,
and could result in serious injury.

How To Prevent It

What Could Happen

5- ENG

A03203

WARNING: Risk to Breathing

WARNING: Risk of Electrical Shock

HAZARD

HAZARD

Your air compressor is powered by
electricity. Like any other electrically
powered device, If it is not used
properly it may cause electric shock.

Repairs attempted by unqualified
personnel can result in serious injury
or death by electrocution.

Electrical Grounding: Failure to provide
adequate grounding to this product
could result in serious injury or death
from electrocution.

See grounding instructions.

Never operate the compressor outdoors
when it is raining or in wet conditions.

Never operate compressor with
protective covers removed or damaged.

Any electrical wiring or repairs required
on this product should be performed by
authorized service center personnel in
accordance with national and local
electrical codes.

Make certain that the electrical circuit to
which the compressor is connected

provides proper electrical grounding,
correct voltage and adequate fuse
protection.

The compressed air directly from your
compressor is not safe for breathing.
The air stream may contain carbon

monoxide, toxic vapors, or solid
particles from the tank. Breathing these
contaminants can cause serious injury
or death.

Sprayed materials such as paint, paint

solvents, paint remover, insecticides,
weed killers, may contain harmful

vapors and poisons.

Air obtained directly from the compressor
should never be used to supply air for
human consumption. In order to use air

produced by this compressor for
breathing, suitable filters and in-line

safety equipment must be properly
installed. In-line filters and safety
equipment used in conjunction with the
compressor must be capable of treating
air to all applicable local and federal
codes prior to human consumption.

Work in an area with good cross
ventilation. Read and follow the safety
instructions provided on the label or
safety data sheets for the materials you
are spraying. Use a NIOSH/ MSHA
approved respirator designed for use with

your specific application.

How To Prevent It

What Could Happen

How To Prevent It

What Could Happen

6- ENG

A03203

WARNING: Risk of Burns

Touching exposed metal such as the
compressor head or outlet tubes, can
result in serious burns.

Never touch any exposed metal parts
on compressor during or immediately
after operation. Compressor will remain
hot for several minutes after operation.

Do not reach around protective shrouds
or attempt maintenance until unit has
been allowed to cool.

WARNING: Risk from Moving Parts

Never operate the compressor with
guards or covers which are damaged or
removed.

Moving parts such as the pulley, flywheel,

and belt can cause serious injury if they
come into contact with you or your
clothing.

WARNING: Risk of Falling

A portable compressor can fall from a
table, workbench, or roof causing

damage to the compressor and could
result in serious injury or death to the
operator.

Always operate compressor in a stable
secure position to prevent accidental
movement of the unit. Never operate
compressor on a roof or other elevated
position. Use additional air hose to
reach high locations.

HAZARD

HAZARD

HAZARD

Any repairs required on this product
should be performed by authorized
service center personnel.

Attempting to operate compressor with
damaged or missing parts or attempting

to repair compressor with protective
shrouds removed can expose you to
moving parts and can result in serious

injury.

How To Prevent It

What Could Happen

How To Prevent It

What Could Happen

How To Prevent It

What Could Happen

7- ENG

A03203

Review and understand all instructions
and warnings in this manual.

Become familiar with the operation and
controls of the air compressor.

Keep operating area clear of all persons,

pets, and obstacles.
Keep children away from the air

compressor at all times.

Do not operate the product when
fatigued or under the influence of
alcohol or drugs. Stay alert at all times.

Never defeat the safety features of this

product.

Equip area of operation with a fire
extinguisher.

Do not operate machine with missing,
broken, or unauthorized parts.

WARNING: Risk of Unsafe Operation

Unsafe operation of your air compressor
could lead to serious injury or death to
you or others.

HAZARD

SAVE THESE INSTRUCTIONS

How To Prevent It

What Could Happen

8- ENG

A03203

GLOSSARY

DUTY CYCLE

This air compressor pump is capable of
running continuously. However, to
prolong the life of your air compressor,
it is recommended that a 50%-75%

Become familiar with these terms
before operating the unit.

CFM: Cubic feet per minute.
SCFM: Standard cubic feet per

minute; a unit of measure of air
delivery.

PSIG: Pounds per square inch
gauge; a unit of measure of pressure.

Code Certification: Products that
bear one or more of the following
marks: UL, CUL, ETL, CETL, have
been evaluated by OSHA certified
independent safety laboratories and
meet the applicable Underwriters
Laboratories Standards for Safety.

Cut-In Pressure: While the motor is
off, air tank pressure drops as you
continue to use your accessory.

average duty cycle be maintained; that
is, the air compressor pump should not
run more than 30-45 minutes in any
given hour.

When the tank pressure drops to a
certain low level the motor will restart
automatically. The low pressure at
which the motor automatically
restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air
compressor is turned on and begins
to run, air pressure in the air tank
begins to build. It builds to a certain
high pressure before the motor
automatically shuts off, protecting
your air tank from pressure higher
than its capacity. The high pressure
at which the motor shuts off is called
"cut-out" pressure.

Branch Circuit: Circuit carrying
electricity from electrical panel to
outlet.

SPECIFICATION CHART

Accessories for this unit are available at the store the unit was purchased.

ACCESSORIES

Model No. P1015

Bore 1.875"
Stroke 1.25"
Voltage/Hertz/Phase 120/60/1
Minimum Branch Circuit Requirement 15 amps
Fuse Type Time Delay
Air Tank Capacity (gallons) 1.5
Approx. Cut-In 105
Approx. Cut-out 135
SCFM @ 40 psig 3.0
SCFM @ 90 psig 2.0

9- ENG

A03203

ASSEMBLY

Assemble Hose

1. Assemble hose to air outlet.
IMPORTANT: The hex fitting on
the air outlet MUST be held in
place with a wrench when
tightening hose onto air outlet.

Tools Required for Assembly

1 - 9/16" open end wrench
1 - adjustable wrench

Unpacking

1. Remove unit from carton and
discard all packaging. NOTE:
Save all parts bags.

Contents of Carton

1 - Air Compressor
1 - Air Hose
1 - Female Tire Chuck
1 - Inflator Accessory Kit

Assemble Other Accessories

1. Attach the hose adapter to hose.

2. Choose the needed accessory.
Attach the tapered nozzle,
extension tube, or blow gun
adapter to the hose adapter. The
inflating needle attaches to the
blow gun adapter. NOTE: The
tapered nozzle, extension tube,
and blow gun adapter can also
be attached to a blow gun (sold
separately, not shown).

Assemble Accessories

Choose the accessory needed.

Assemble Female Tire Chuck

1. Assemble female tire chuck to
hose and tighten securely with
wrenches.

female tire
chuck

Hose
Adapter

Hose
End

Tapered
Nozzle

Blow Gun
Adapter

inflating
needle

Extension Tube

10- ENG

A03203

1. The cord set and plug with this
unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.

IMPORTANT: The outlet being used
must be installed and grounded in
accordance with all local codes and
ordinances.

2. Make sure the outlet being used
has the same configuration as
the grounded plug. DO NOT
USE AN ADAPTER. See
illustration.

3. Inspect the plug and cord before
each use. Do not use if there are
signs of damage.

4. If these grounding instructions
are not completely understood,
or if in doubt as to whether the
compressor is properly
grounded, have the installation
checked by a qualified
electrician.

Risk of Electrical
Shock. IMPROPER

GROUNDING CAN RESULT IN
ELECTRICAL SHOCK.
Do not modify the plug provided. If

it does not fit the available outlet, a
correct outlet should be installed
by a qualified electrician.

Repairs to the cord set or plug
MUST be made by a qualified
electrician.

INSTALLATION

GROUNDING INSTRUCTIONS

Risk of Electrical

Shock. In the event
of a short circuit, grounding
reduces the risk of shock by
providing an escape wire for the
electric current. This air
compressor must be properly
grounded.

The portable air compressor is
equipped with a cord having a
grounding wire with an appropriate
grounding plug (see following
illustrations). The plug must be used
with an outlet that has been installed
and grounded in accordance with all
local codes and ordinances.

HOW TO SET UP YOUR
UNIT

Location of the Air Compressor

Locate the air compressor in a clean,
dry and well ventilated area. The air
compressor should be located at
least 12" away from the wall or other
obstructions that will restrict the flow
of air. The air compressor pump and
shroud are designed to allow for
proper cooling. The ventilation
openings on the compressor are
necessary to maintain proper
operating temperature. Do not place
rags or other containers on or near
these openings.

Grounding Pin

Grounded
Outlets

Plug

11- ENG

A03203

Extension Cords

If an extension cord must be used, be
sure it is:

• a 3-wire extension cord that has

a 3-blade grounding plug, and a
3-slot receptacle that will accept
the plug on the product

• in good condition

• no longer than 50 feet

• 16 gauge (AWG) or larger. (Wire

size increases as gauge number
decreases. 14, 12, 10, and 8
AWG may also be used.

Voltage and Circuit Protection

Refer to the specification chart for the
voltage and minimum branch circuit
requirements.

Risk of Unsafe

Operation. Certain
air compressors can be operated
on a 15 amp circuit if the following
conditions are met.

1. Voltage supply to circuit must
comply with the National
Electrical Code.

2. Circuit is not used to supply any
other electrical needs.

3. Extension cords comply with
specifications.

4. Circuit is equipped with a 15
amp circuit breaker or 15 amp
time delay fuse. NOTE: If
compressor is connected to a
circuit protected by fuses, use
only time delay fuses. Time delay
fuses should be marked "D" in
Canada and "T" in the US.

If any of the above conditions cannot
be met, or if operation of the
compressor repeatedly causes
interruption of the power, it may be
necessary to operate it from a 20
amp circuit. It is not necessary to
change the cord set.

12- ENG

A03203

safety valve will protect against high
pressure by "popping out" at its
factory set pressure (slightly higher
than the pressure switch "cut-out"
setting).

Outlet Pressure Gauge: The outlet
pressure gauge indicates the air
pressure available at the outlet side
of the regulator. This pressure is
controlled by the regulator and is
always less than or equal to the tank
pressure.

Regulator: Controls the air pressure
shown on the outlet pressure gauge.
Turn knob clockwise to increase
pressure and counterclockwise to
decrease pressure.

Description of Operation

Become familiar with these controls
before operating the unit.

Off/Auto Switch: Turn this switch
to"AUTO" to provide automatic power
to the pressure switch and "OFF" to
shut off power at the end of each use.

Pressure Switch (not shown): The
pressure switch automatically starts
the motor when the air tank pressure
drops below the factory set "cut-in"
pressure. It stops the motor when the
air tank pressure reaches the factory
set "cut-out" pressure.

Safety Valve: If the pressure switch
does not shut off the air compressor
at its "cut-out" pressure setting, the

OPERATION

Know Your Air Compressor

READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the
location of various controls and adjustments. Save this manual for future reference.

Air
Outlet

Air
Hose

Safety Valve

Regulator

Outlet
Pressure Gauge

Female
Air Chuck

Drain
Valve

Off/Auto
Switch

Power

Cord

Hose Adapter

Tapered
Inflator

Blow Gun
Adapter

Extension
Tube

Inflating
Needle