
Service Instruction
SI-6-18-8-D
Replaces SI-6-18-8-C
130515 TWO STAGE FILTER ASSEMBLY
DESCRIPTION
The two stage filter unit is designed to be a
point of use system. It is capable of
removing dirt, water, oil, liquid aerosols
and sub-micron particles.
SPECIFICATIONS
Air Flow: 65 SCFM @ 90 PSIG
Max. Pressure: 150 PSIG
Max. Temperature: 150°F
INSTALLATION
Max. Temperature: 175°F
RISK OF PERSONAL INJURY
RISK OF PROPERTY DAMAGE
Except as otherwise specified by the manufacturer, this product is specifically
designed for com pressed air service and
use with any other fluid (liquid or gas) is a
misapplication. For example, use with or
injection of certain hazardous gases in the
system (such as oxygen or liquid petroleum
gas) could be harmful to the unit or result in
a combustible condition that may cause fire
or explosion. Manufacturer’s war ranties are
void in the event of misapplication and
manufacturer assumes no responsibility for
any resulting loss.
Max. Temperature: 175°F
INLET AIR
UNION
1/2 NPT
DRAIN
RECOMMENDED INSTALLATION INSIDE SPRAY BOOTH
54" FROM FLOOR
REPLACEMENT
INDICATOR
OK REPLACE
ELEMENT
130515
FILTER ASSEMBLY*
1/2 NPT
1st Stage
Liquid and
dirt removal
40 microns
INLET AIR
UNION
2nd Stage
Liquid aerosols and
sub-micron particles
0.01 microns
ALTERNATE INSTALLATION
OPTIONAL 130516
*Included with 130522
REGULATOR
ASSEMBLY**
OPTIONAL 130516
REGULATOR
ASSEMBLY*
OPTIONAL
130500
DESICCANT
DRYER*
3-Stage System
OUTLET
AIR
RISK OF PERSONAL INJURY
Release all air pressure from system
before servicing system. Use only specified parts.
130515
FILTER ASSEMBLY**
DRAIN
Remove one nipple
**Included with 130523
2-Stage System

Page 2 SI-6-18-8-D
MAINTENANCE
Max. Temperature: 175°F
Snug tight
RISK OF PERSONAL INJURY
Components are under pressure. Relieve
air pressure before performing any maintenance.
1ST STAGE WATER SEPARATOR FILTER
1. Daily, twist drain to remove liquid.
2. Every 3 months, replace element.
2ND STAGE COALESCING FILTER
1. Daily, twist drain to remove liquid.
2. Daily, check replacement indicator (with
air flowing).
OK REPLACE
ELEMENT
PARTS LIST
Ref. Replacement
No. Part No. Description
1 130519 Drain Kit (one set)
2 130517 Filter Element, Water
3 130518 Filter Element, Coalescing
4 130520 Indicator Kit, Coalescing
5 VA-595 Shut-off Valve
5
2
Hand tight
4
Note parts
orientation when
disassembling
3
1
Hand tight
plus 1/4 turn
Snug tight
1

Instrucciones de servicio
SI-6-18-8-D
Substituye SI-6-18-8-C
130515 CONJUNTO DE FILTRO EN DOS ETAPAS
DESCRIPCIÓN
La unidad de filtro en dos etapas es
diseñada para ser un sistema de punto de
uso. Es capaz de eliminar suciedad, agua,
aceite, pulverizadores líquidos y partículas
de sub-micrones.
ESPECIFICACIONES
Circulación del aire: 65 SCFM @ 90 PSIG
Presión máxima: 150 PSIG
Temperatura máxima: 150°F
INSTALACIÓN
RIESGO DE LESIÓN PERSONAL
RIESGO DE DAÑO A LA PROPIEDAD
Excepto cuando el fabricante especifique
otra cosa, este producto es diseñado
específicamente para servicio con aire
comprimido y su uso con cualquier otro
fluido (líquido o gas) es una aplicación indebida. Por ejemplo, su uso con o la inyección
de ciertos gases peligrosos en el sistema
(tales como oxígeno o gas de petróleo
líquido) puede ser perjudicial para la unidad
o producir una condición combustible que
podría ocasionar incendio o explosión. Las
garantías del fabricante son nulas en caso
de aplicación indebida y el fabricante no
asume ninguna responsabilidad por
ninguna pérdida resultante.
INSTALACIÓN RECOMENDADA DENTRO DEL RECINTO DE PULVERIZACIÓN
AIRE DE ENTRADA
54 PULG. DESDE
INDICADOR DE
REEMPLAZO
OK REEMPLACE
UNIÓN
130515 CONJUNTO
DEL FILTRO*
1/2 NPT
Remoción de
DRENAJE
AIRE DE ENTRADA
y suciedad
40 micrones
EL PISO
EL ELEMENTO
1ª Etapa -
líquido
UNIÓN
1/2 NPT
2a Etapa -
Pulverizadores líquidos
y partículas de sub-
micrones 00.01
micrones
INSTALACIÓN ALTERNATIVA
*Incluido con Sistema de
CONJUNTO DEL
REGULADOR**
OPCIONAL
130516
CONJUNTO DEL
REGULADOR*
OPCIONAL
130500
SECADOR
DESECANTE*
OPCIONAL
3 Etapas 130522
130516
AIRE DE
SALIDA
RIESGO DE LESIÓN PERSONAL
Deje escapar toda la presión del aire del
sistema antes de dar servicio de mantenimiento al sistema. Utilice únicamente las
piezas especificadas.
130515 CONJUNTO
DEL FILTRO**
DRENAJE
Quite una boquilla
**Incluido con Sistema de
2 Etapas 130523