De Vielle DEF978180 Instruction Manual
INSTRUCTION MANUAL
Models: DEF978180
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE
Although every precaution has been taken to eliminate sharp edges always take
care when handling metal components.
FIRESIDE
Traditional Cast Iron Gas Heater
1
SAFETY INSTRUCTIONS
Do not: Attempt to use the heater in high rise ats, basements, bathrooms or bedrooms.
Do not: Use any other gas except Butane or Propane.
Do not: Attempt to clean the heater until it is turned o and fully cooled.
Do not: Use naked ame to detect suspected gas leaks.
Do not: Allow children or pets to play near the heater.
Do not: Twist the exible gas hose.
Do not: Open the heater door while it is operating.
Do not: Touch the glass panel or front and sides of the unit while the heater is operating.
Allow the unit to cool down for one hour before touching the front or sides.
Warning:
Never attempt to light the unit if the hose is loose or damaged in any way. Also never attempt to light the unit if you
have reason to believe that the unit may be leaking gas. In the event of a gas leak turn o the gas supply at the cylinder
and have the unit fully checked by a competent person in accordance with the instructions enclosed. We recommend
servicing after every 1000 hours of use.Should you need to change the gas bottle, conrm that the gas supply is turned
o at the cylinder and that there are no sources of ignition near before proceeding.
Do: Place heater on a at, level and solid surface at all times.
Do: Leak test the unit after long periods of storage.
Do: Wait for 3 minutes before relighting, if the burner ame becomes extinguished during use.
Do: Ensure that all naked ames are extinguished before tting a new cylinder.
Do: Store gas cylinders outdoor, above ground level in a safe and secure environment.
Do: Make sure that the gas supply at the gas cylinder is turned o after use.
Do: Ensure that servicing of the unit is carried out by a competent person in accordance with the instructions enclosed.
Always: Follow any safety instructions supplied with gas cylinders.
Always: Keep unit well away from glass doors and windows to ensure no possibility of heat build up and damage.
Always: Ensure that there is no blockage of airow. For example sooting and poor burning can be caused by dirt,
inserts, cobwebs, blocking the airow to/in the burner.
Cleaning: Abrasive cleaners are not to be used. Clean unit with a damp cloth when fully cooled.
This unit is designed for use with an 11.34kg cylinder (Eire) and 7-15kg cylinder (U.K)
Open the heater door by loosening the
thumb screw. Remove the box containing
synthetic coals from the heater. Carefully
remove the synthetic coals from the box.
Place the synthetic coals into the heater grate as shown.
To t battery unscrew ignition button and place battery
in housing. Ret ignition button securely.
Fit the back panel of the heater by
positioning the tabs on the bottom of
the door into the inside of the rim at the
bottom of the heater. Then push
the panel ush with the back of the heater
and turn the door catch to the
up position to secure the panel.
Test all gas connections for leaks with
proprietary leak detection uid or
soapy water applied with a small paintbrush.
ASSEMBLY INSTRUCTIONS - IN 3 EASY STEPS
If you require any further assistance please do not hesitate to contact us directly
on our helpline: 00 353 1 823 9200
Door catch
Box containing
synthetic coals
Thumb screw
Ignition button
Back Panel
Tab
Loading...