Develop ineo 40P Product Manual
ineo 40P
Product Guide
11.02.09
2
Product Guide – ineo 40P
Table of contents
Product Basic ...........................................................................3
Product Configuration .............................................................4
System Specifications .............................................................7
Printer Specifications...............................................................9
Consumables..........................................................................11
Article Numbers......................................................................12
Service Part.............................................................................13
Appendix.................................................................................14
3
Product Guide – ineo 40P
Product Basic
MODEL DEVELOPMENT CODE
OPAL-P-H
MODEL NAME
ineo 40P
SUCCESSOR MODEL FOR
N/A
ESTIMATED SALES START
01/09
ALSO AVAIL ABLE AS
KM bizhub 40P
(KM pagepro 5650EN for the open market)
TYPE
desktop A4 b/w laser beam printer
MAX (PEAK) MONTHLY PAGE VOLUME
200k prints
MAX. AVERAGE/PERMANENT MONTHLY
PAGE VOLUME
16.6 k prints
MACHINE LIFE
1 Mill. prints or 5 years whichever comes first
MPBF
(Mean Prints Between Failure)
300k prints
MTTR (Mean Time To Repair)
15 minutes or less
SAFETY & ENVIRONMENT
English/German Data Sheets
dBox / Marketing / Safety and Environment
PLEASE NOTICE
Standard paper weight for systems is 80 g/m2 for monochrome machines and 90 g/m2 for full colour ones. Since using these
standards result in optimum system performance, all specifications on performance, reliability, maintenance and replacement
based on those standard papers. Using thick papers, labels, transfer and polyester films continuously can increase the wear
and tear on replacement parts and consumables – meaning your servicing costs will go up.
Use the bypass or the lower tray from the paper feed unit when working with materials having such characteristics as
polyester films, textile transfer films and labels. Otherwise, you may be faced with double feeding or a higher number of
feeding jams.
If possible use subtray when working with materials having such characteristics as polyester films, textile transfer films and
labels. Roller-marks on the copy or print may appear or increased ja ms can occur. Standard paper weights yield the best
possible copy and print results. Using higher grammage may influence the quality of the output . Using s tandard paper weights
also guarantees that double sided copies and prints are made reliably. Different characters of films as well as thick, thin and
coated papers may increase the jam rate for double
4
Product Guide – ineo 40P
Product Configuration
SYSTEM DIMENSION
5
Product Guide – ineo 40P
SYSTEM DIMENSION
Front View
6
Product Guide – ineo 40P
SYSTEM CONFIGURATION
128/256 MB Memory
Flash Card Adapter
Hard Disk Kit
Offset Stacker
Lower Paper Feeder
Duplex Unit
Copy Desk (Cabinet)
(
only for ineo 40P
)
Loading...