Develop D 1650iD, D 2050iD User Manual
User Manual
D 1650iD/D 2050iD
Contents
1 Introduction
1.1 We Want You to Be a Satisfied Customer ..................................1-1
1.2 Explanation of Manual Conventions ...........................................1-2
1.3 The Manual – Printed and Digital.................................................1-3
Manual (Printed Version)............................................................1-3
Extended Manual (Digital Version on CD-R)..............................1-3
1.4 Explanation of Basic Concepts and Symbols ............................1-4
Paper Feeding............................................................................1-4
“Width” and “Length”...................................................................1-4
Paper Orientation .......................................................................1-5
1.5 Energy Star® .................................................................................1-6
What is an ENERGY STAR® Product?......................................1-6
1.6 Safety Information.........................................................................1-7
Warning and Precaution Symbols ..............................................1-7
Meaning of Symbols...................................................................1-7
WARNING ..................................................................................1-8
CAUTION ...................................................................................1-9
Precautions for Routine Use.....................................................1-10
USER INSTRUCTIONS
CE Marking (Declaration of Conformity)...................................1-10
Laser Safety .............................................................................1-11
CDRH Regulation.....................................................................1-12
For European Users .................................................................1-12
For Denmark Users ..................................................................1-12
For Finland, Sweden Users......................................................1-13
For Norway Users.....................................................................1-13
Laser Safety Label....................................................................1-14
Ozone Release.........................................................................1-14
Acoustic Noise..........................................................................1-14
2 Precautions
2.1 Installation Precautions................................................................2-1
Installation Site ...........................................................................2-1
Power Source.............................................................................2-1
Space Requirements ..................................................................2-2
D 1650iD/D 2050iD IVZ-1
2.2 Operation Precautions................................................................. 2-3
Operating Environment .............................................................. 2-3
Proper Use................................................................................. 2-3
Transporting the Machine .......................................................... 2-5
Care of Machine Supplies.......................................................... 2-5
Storage of Copies ...................................................................... 2-5
2.3 Legal Restrictions on Copying.................................................... 2-6
2.4 Components and Their Functions .............................................. 2-7
2.5 Part Names and Their Functions ................................................ 2-9
Main Unit.................................................................................... 2-9
Inside of Main Unit ................................................................... 2-11
Document Feeder (Optional) ................................................... 2-12
Multiple Bypass (Optional) ....................................................... 2-13
Paper Feed Unit (Optional) ...................................................... 2-14
Job Separator (Optional).......................................................... 2-15
2.6 Names of Control Panel Parts and Their Functions................ 2-16
Control Panel Parts and Their Functions................................. 2-16
Display Indications ................................................................... 2-19
Adjusting the Angle of the Display [CD]................................... 2-19
2.7 Power Supply.............................................................................. 2-20
To turn on the machine ............................................................ 2-20
To turn off the machine ............................................................ 2-20
Default Settings........................................................................ 2-20
Auto Panel Reset ..................................................................... 2-21
Energy Save Mode .................................................................. 2-21
Auto Shut Off ...........................................................................2-22
Queued Copy Jobs .................................................................. 2-22
3 Basic Operations
3.1 Making Copies .............................................................................. 3-1
To make a simple copy .............................................................. 3-1
3.2 Loading Paper............................................................................... 3-3
Loading Paper Into the 1st Paper Tray ...................................... 3-4
Loading Paper Into the 2nd Paper Tray ..................................... 3-6
3.3 Loading the Document................................................................. 3-8
Loading documents into the Document Feeder ......................... 3-8
Positioning sheet documents on the Original Glass .................. 3-9
Positioning transparent documents on the Original Glass ....... 3-10
Positioning books on the Original Glass .................................. 3-11
Loading documents of mixed sizes in the
Document Feeder [CD] .......................................................... 3-11
IVZ-2 D 1650iD/D 2050iD
3.4 Stopping/Restarting/Cancelling a Copy Job ............................3-12
3.5 Confirmation Mode [CD].............................................................3-12
3.6 Reducing Electricity Usage [CD] ...............................................3-12
4 Useful Operations
4.1 Specifying a Zoom setting [CD] .................................................4-1
4.2 Using the “Auto/Photo” Function [CD] .....................................4-1
4.3 Copying Onto Various Types of Media .......................................4-1
To copy onto OHP transparencies .............................................4-1
To copy onto label sheets [CD] ................................................4-3
To copy onto envelopes (non-standard size) [CD] .....................4-3
To copy onto postcards [CD] ....................................................4-3
5 Before Making Copies
5.1 Paper ..............................................................................................5-1
Paper Types ...............................................................................5-1
Paper Sizes ................................................................................5-3
Paper Capacity...........................................................................5-4
Unsuitable Paper........................................................................5-5
5.2 Print Area.......................................................................................5-6
5.3 Paper Storage................................................................................5-6
5.4 Making Copies on Manually Fed Paper.......................................5-7
Paper That Can Be Fed Manually ..............................................5-7
Adjusting the Multiple Bypass.....................................................5-8
Loading Plain Paper Into the Bypass Trays ...............................5-9
Loading Postcards Into the Bypass Trays [CD]........................5-10
Loading Envelopes Into the Bypass Trays [CD].......................5-10
Loading OHP Transparencies Into the Bypass Trays ..............5-10
Loading Label Sheets Into the Bypass Trays [CD]...................5-10
Copying Onto Manually Fed Paper by Manual Bypass ............5-11
Copying Onto Manually Fed Paper by Multiple Bypass ...........5-14
5.5 Selecting the Paper Source........................................................5-17
To make copies using the Auto Paper function........................5-17
To copy with a manually selected paper size ...........................5-18
To load special paper into the 1st Tray [CD] ............................5-18
Automatically Selecting the Paper Source [CD) .......................5-18
Order for Automatically Switching Paper Drawers [CD] ...........5-18
5.6 Original Documents....................................................................5-19
Using the Document Feeder.....................................................5-19
Document Types ......................................................................5-19
D 1650iD/D 2050iD IVZ-3
Documents of Uniform Sizes ................................................... 5-20
Mixed Width Document Sizes (AFR-19) .................................. 5-20
Precautions Concerning the Documents ................................. 5-21
5.7 Specifying a Zoom Setting ........................................................ 5-22
Zoom Settings.......................................................................... 5-22
To make copies using the “AUTO” zoom setting ..................... 5-23
To make copies using a fixed zoom setting ............................. 5-24
To make copies using a specific zoom setting......................... 5-25
To make copies using the “X/Y Zoom” function [CD]............... 5-25
5.8 Specifying the Copy Density (“Auto/Photo” Function) .......... 5-26
To make copies after specifying a copy density ......................5-27
5.9 Interrupting Copy Jobs [CD] ..................................................... 5-27
6 Advanced Copy Operations
6.1 Single-Sided Copies [CD] ............................................................ 6-1
To make copies using the “2in1” (or “4in1”)
copy function [CD] .................................................................... 6-1
To make copies using the “Book Separation” function [CD] ...... 6-1
6.2 Double-Sided Copies ................................................................... 6-1
Double-sided copying is not possible under the following
conditions:.................................................................................. 6-3
To make double-sided copies using the Original Glass............. 6-3
To make double-sided copies using the Document Feeder....... 6-4
6.3 Finishing Copies (“Sort” and “Group” functions) .................... 6-5
Notes on Using the “Sort” and “Group” Functions ..................... 6-6
Shift Sorting ...............................................................................6-7
Crisscross Sorting...................................................................... 6-7
Shift Grouping ............................................................................ 6-7
Crisscross Grouping .................................................................. 6-7
Specifying Finishing................................................................... 6-8
6.4 Erasing Sections of Copies [CD] ................................................ 6-9
6.5 Negative/Positive Inverted Copying [CD]................................... 6-9
6.6 Making Copies for Filing (“File Margin” function) [CD] ............ 6-9
6.7 Programmed Copy Jobs [CD] ..................................................... 6-9
6.8 Access Numbers [CD].................................................................. 6-9
7 Utility Mode – Copy Functions [CD]
IVZ-4 D 1650iD/D 2050iD
8 Error Messages
8.1 When the Message “TONER EMPTY” Appears..........................8-1
To replace the toner bottle..........................................................8-2
8.2 When the Message “PAPER JAM” Appears...............................8-4
To clear a paper misfeed in the Duplex Unit ..............................8-4
To clear a paper misfeed in the main unit or 1st Tray ................8-5
To clear a paper misfeed in the Paper Feed Unit.......................8-8
To clear a paper misfeed in the Multiple Bypass........................8-9
8.3 When the Message “ORIGINAL DOC.JAM” Appears...............8-11
To clear a misfeed in the Automatic Document Feeder
(AF-12) .....................................................................................8-11
To clear a misfeed in the Duplexing Document Feeder
(AFR-19)...................................................................................8-13
8.4 Main Error Messages and Their Remedies...............................8-15
9 Troubleshooting
9.1 When Incorrect Copies Are Produced ........................................9-1
9.2 When Copying Is Not Performed Correctly ................................9-3
10 Appendix
10.1 Specifications..............................................................................10-1
Main Unit D 1650iD/D 2050iD ..................................................10-1
Duplexing Document Feeder AFR-19 ......................................10-2
Mixed Width Document Sizes (AFR-19)...................................10-3
Automatic Document Feeder AF-12.........................................10-3
Paper Feed Unit PF-126...........................................................10-4
Shifting Unit OT-103.................................................................10-4
Job Separator JS-204...............................................................10-4
Multiple Bypass MB-6...............................................................10-5
10.2 Care of the Machine....................................................................10-6
Cleaning ...................................................................................10-6
Housing ....................................................................................10-6
Original Glass...........................................................................10-6
Document Pad..........................................................................10-6
Control Panel............................................................................10-7
10.3 Function Combination Table [CD].............................................10-7
10.4 Paper Size and Zoom Ratio Tables [CD]...................................10-7
11 Index
D 1650iD/D 2050iD IVZ-5
IVZ-6 D 1650iD/D 2050iD
Introduction
1 Introduction
1.1 We Want You to Be a Satisfied Customer
Thank you for choosing this machine.
This User Manual describes the functions, operating procedures,
precautions, and basic troubleshooting for this machine. Before using the
machine, be sure to read the User Manual thoroughly in order to ensure
that you use it efficiently. After you have gone through the manual, store
it in the holder on the machine and keep it handy at all times.
Note that some of the illustrations of the machine used in the User Manual
may be different from what you actually see on your machine.
1
D 1650iD/D 2050iD 1-1
1
1.2 Explanation of Manual Conventions
The marks and text formats used in this manual are described below.
WARNING
Failure to observe instructions highlighted in this manner may result
in fatal or critical injuries.
§ Observe all warnings in order to ensure safe use of the copier.
CAUTION
Failure to observe instructions highlighted in this manner may result
in serious injuries or property damage.
§ Observe all cautions in order to ensure safe use of the copier.
Note*
(*May also appear as “Important” or “Tip”)
Text highlighted in this manner contains useful information and tips to
ensure safe use of the machine.
Introduction
1 The number 1 as formatted here
indicates the first step of a
sequence of actions.
An illustration inserted
2 Subsequent numbers as formatted
here indicate subsequent steps of a
sequence of actions.
Text formatted in this style
?
provides additional assistance.
§ Text formatted in this style describes the action that will ensure the
desired results are achieved.
[Copy] key
The names of keys on the control panel are written as shown above.
1-2 D 1650iD/D 2050iD
here shows what operations
must be performed.
Introduction
1.3 The Manual – Printed and Digital
Today's advanced copier systems offer a wide variety of very different
functions. A copier system can be set up for very specific requirements
and adapted for personal copying needs. Generally, it is experienced
users or system administrators who set up the copier system for individual
needs. One single manual that included all possible information, much of
it only relevant for the experienced user or system administrator, would be
much too large and complex for everyday use. This is why we supply two
manuals. You can decide for yourself which manual meets your needs.
Manual (Printed Version)
The printed version of the manual contains all the information that you
need for everyday operation of the copier system. You should keep this
manual near the copier system so you can consult it any time.
It contains a lot of useful information, such as:
G Loading originals correctly and using the document feeder.
G Setting a Copy Mode.
G Making copies lighter and darker.
Extended Manual (Digital Version on CD-R)
The extended version of the manual is supplied as a pdf file and is
specifically recommended for experienced users and system
administrators.
This version contains – as well as all the information in the printed
version – additional information, such as:
G Changing Basic Settings.
G Using auxiliary functions.
G Setting up Copy Track and Administrator Numbers.
G Storing and calling individual paper sizes and Zoom Ratios.
1
Is Acrobat Reader already installed?
You will need Acrobat Reader to view the extended manual. A version
of Acrobat Reader is included on the CD-R that you can install on your
computer if necessary.
D 1650iD/D 2050iD 1-3
1
Introduction
1.4 Explanation of Basic Concepts and Symbols
The use of words and symbols in this manual are explained below.
Paper Feeding
During printing, paper is supplied from the right side of the machine and
fed into the output tray on top or the output option at the left with the
printed surface of the page facing down. The paper feed direction is
shown by the arrows in the diagram below.
“Width” and “Length”
Whenever paper dimensions are
mentioned in this manual, the first value
always refers to the width of the paper
(shown as “X” in the illustration) and the
second to the length (shown as “Y”).
1-4 D 1650iD/D 2050iD
Introduction
Paper Orientation
Lengthwise ( )
If the width (X) of the paper is shorter
than the length (Y), the paper has a
vertical or portrait orientation, indicated
by either “L” or .
Crosswise ( )
If the width (X) of the paper is longer
than the length (Y), the paper has a
horizontal or landscape orientation,
indicated by either “C” or .
1
D 1650iD/D 2050iD 1-5
1
1.5 Energy Star®
Introduction
As an ENERGY STAR® Partner, we have determined that this machine
meets the ENERGY STAR
As an ENERGY STAR
meets the ENERGY STAR® Guidelines for energy efficiency.
What is an ENERGY STAR® Product?
An ENERGY STAR® product has a special feature that allows it to
automatically switch to a “low-power mode” after a period of inactivity. An
ENERGY STAR
on utility bills and helps protect the environment.
®
product uses energy more efficiently, saves you money
®
Guidelines for energy efficiency.
®
Partner, we have determined that this machine
1-6 D 1650iD/D 2050iD
Introduction
1.6 Safety Information
This section contains detailed instructions on the operation and
maintenance of this machine. To achieve optimum utility of this device, all
operators should carefully read and follow the instructions in this manual.
Please keep this manual in a handy place near the machine.
Please read the next section before using this device. It contains important information
related to user safety and preventing equipment problems.
Make sure you observe all of the precautions listed in this manual.
* Ver06
Please note that some parts of the contents of this section may not correspond with the
purchased product.
Warning and Precaution Symbols
1
WARNING:
CAUTION:
Meaning of Symbols
A triangle indicates a danger against which you should take precaution.
This symbol warns against cause burns.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.
Ignoring this warning could cause serious injury or even death.
Ignoring this caution could cause injury or damage to property.
D 1650iD/D 2050iD 1-7
1
WARNING
Introduction
• Do not modify this product, as a fire, electrical shock, or breakdown could
result. If the product employs a laser, the laser beam source could cause
blindness.
• Do not attempt to remove the covers and panels which have been fixed to
the product. Some products have a high-voltage part or a laser beam
source inside that could cause an electrical shock or blindness.
• Use only the power cord supplied in the package. If a power cord is not
supplied, only use the power cord and plug that is specified in POWER
CORD INSTRUCTION. Failure to use this cord could result in a fire or
electrical shock.
• Use the power cord supplied in the package only for this machine and
NEVER use it for any other product. Failure to observe this precaution
could result in a fire or electrical shock.
• Use only the specified power source voltage. Failure to do that could result
in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appliances or
machines. Use of a power outlet for more than the marked current value
could result in a fire or electrical shock.
Do not unplug and plug in the power cord with a wet hand, as an electrical
shock could result.
Plug the power cord all the way into the power outlet. Failure to do this could
result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on,
or damage the power cord. Use of a damaged power cord (exposed core
wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your
authorized service representative.
• Do not use an extension cord, in principle. Use of an extension cord could
cause a fire or electrical shock. Contact your authorized service
representative if an extension cord is required.
Do not place a flower vase or other container that contains water, or metal
clips or other small metallic objects on this product. Spilled water or metallic
objects dropped inside the product could result in a fire, electrical shock, or
breakdown.
Should a piece of metal, water, or any other similar foreign matter get inside
the product, immediately turn OFF the power switch, unplug the power cord
from the power outlet, and then call your authorized service representative.
• Do not keep using this product, if this product becomes inordinately hot or
emits smoke, or unusual odor or noise. Immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your
authorized service representative. If you keep on using it as is, a fire or
electrical shock could result.
• Do not keep using this product, if this product has been dropped or its cover
damaged. Immediately turn OFF the power switch, unplug the power cord
from the power outlet, and then call your authorized service representative.
If you keep on using it as is, a fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot toner
may scatter and cause burns or other damage.
1-8 D 1650iD/D 2050iD
Introduction
CAUTION
Connect the power cord to an electrical outlet that is equipped with a
grounding terminal.
• Do not use flammable sprays, liquids, or gases near this product, as a fire
could result.
• Do not leave a toner unit or drum unit in a place within easy reach of
children.
Licking or ingesting any of these things could injure your health.
• Do not let any object plug the ventilation holes of this product. Heat could
accumulate inside the product, resulting in a fire or malfunction.
• Do not install this product at a site that is exposed to direct sunlight, or near
an air conditioner or heating apparatus. The resultant temperature changes
inside the product could cause a malfunction, fire, or electrical shock.
• Do not place the product in a dusty place, or a site exposed to soot or
steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or
breakdown could result.
• Do not place this product on an unstable or tilted bench, or in a location
subject to a lot of vibration and shock. It could drop or fall, causing personal
injury or mechanical breakdown.
• After installing this product, mount it on a secure base. If the unit moves or
falls, it may cause personal injury.
• Do not store toner units and PC drum units near a floppy disk or watch that
are susceptible to magnetism. They could cause these products to
malfunction.
The inside of this product has areas subject to high temperature, which may
cause burns. When checking the inside of the unit for malfunctions such as a
paper misfeed, do not touch the locations (around the fusing unit, etc.) which
are indicated by a “CAUTION HOT” caution label.
Do not place any objects around the power plug as the power plug may be
difficult to pull out when an emergency occurs.
1
The socket-outlet shall be installed near the machine and shall be easily
accessible as the power plug may be difficult to pull out when an emergency
occurs.
• Always use this product in a well ventilated location. Operating the product
in a poorly ventilated room for an extended period of time could injure your
health. Ventilate the room at regular intervals.
• Whenever moving this product, be sure to disconnect the power cord and
other cables. Failure to do this could damage the cord or cable, resulting in
a fire, electrical shock, or breakdown.
• When moving this product, always hold it by the locations specified in the
User manual or other documents. If the unit falls it may cause severe
personal injury. The product may also be damaged or malfunction.
• Remove the power plug from the outlet more than one time a year and
clean the area between the plug terminals. Dust that accumulates between
the plug terminals may cause a fire.
• When unplugging the power cord, be sure to hold onto the plug. Pulling on
the power cord could damage the cord, resulting in a fire or electrical shock.
D 1650iD/D 2050iD 1-9
1
Precautions for Routine Use
• Do not store toner units, PC drum units, and other supplies and
consumables in a place subject to direct sunlight and high temperature and
humidity, as poor image quality and malfunction could result.
• Do not attempt to replace the toner unit and PC drum unit in a place
exposed to direct sunlight. If the PC drum is exposed to intense light, poor
image quality could result.
• Do not unpack a toner unit or PC drum unit until the very time of use. Do
not leave an unpacked unit standing. Install it immediately or poor image
quality could result.
• Do not keep toner units and PC drum units in an upright position or upside
down, as poor image quality could result.
• Do not throw or drop a toner unit or PC drum unit as poor image quality
could result.
• Do not use this product in an area where ammonia or other gases or
chemicals are present. Failure to do so may shorten the service life of the
product, cause damage or decrease performance.
• Do not use this product in an environment with a temperature outside the
range specified in the User manual, as a breakdown or malfunction could
result.
• Do not attempt to feed stapled paper, carbon paper or aluminum foil
through this product, as a malfunction or fire could result.
Do not touch or scratch the surface of the toner unit developing roller and the
PC drum, as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use of any
supply or consumable not recommended could result in poor image quality
and breakdown.
Introduction
USER INSTRUCTIONS CE Marking (Declaration of Conformity)
This product complies with the following EU directives:
89/336/EEC, 73/23/EEC and 93/68/EEC directives.
This declaration is valid for the area of the European Union.
This device must be used with shielded
interface cables. The use of nonshielded cable is likely to result in
interference with radio communications
and is prohibited under EU directives.
1-10 D 1650iD/D 2050iD
Introduction
Laser Safety
This is a digital machine which operates using a laser. There is no
possibility of danger from the laser provided the machine is operated
according to the instructions in this manual.
Since radiation emitted by the laser is completely confined within
protective housing, the laser beam cannot escape from the machine
during any phase of user operation.
This machine is certified as a Class 1 laser product: This means the
machine does not produce hazardous laser radiation.
Internal Laser Radiation
Maximum Average Radiation Power: 6.32 µW at the laser aperture of the
print head unit.
Wavelength: 770-795 nm
This product employs a Class 3b laser diode that emits an invisible laser
beam.
The laser diode and the scanning polygon mirror are incorporated in the
print head unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Therefore, the print head unit should not be opened under any
circumstances.
1
Print Head Laser Aperture of the
D 1650iD/D 2050iD 1-11
Print Head Unit
1
Introduction
CDRH Regulation
This machine is certified as a Class 1 Laser product under Radiation
Performance Standard according to the Food, Drug and Cosmetic Act of
1990. Compliance is mandatory for Laser products marketed in the United
States and is reported to the Center for Devices and Radiological Health
(CDRH) of the U.S. Food and Drug Administration of the U.S. Department
of Health and Human Services (DHHS). This means that the device does
not produce hazardous laser radiation.
The label shown on page 1-14 indicates compliance with the CDRH
regulations and must be attached to laser products marketed in the United
States.
CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is
5 mW and the wavelength is 770-795 nm.
For European Users
CAUTION
Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is
5mW and the wavelength is 770-795 nm.
For Denmark Users
ADVARSEL
Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå
udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene.
Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 5mW
og bølgelængden er 770-795 nm.
1-12 D 1650iD/D 2050iD
Introduction
For Finland, Sweden Users
Tämä on puolijohdelaser. Laserdiodin sunrin teho on 5mW ja aallonpituus
on 770-795 nm.
Det här är en halvledarlaser. Den maximala effekten för laserdioden är
5mW och våglängden är 770-795 nm.
LOUKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
VAROITUS!
Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa
käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING!
Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan
användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
VARO!
Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso
säteeseen.
VARNING!
Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen.
1
For Norway Users
ADVERSEL
Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan
brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1.
Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og
bølgelengde er 770-795 nm.
D 1650iD/D 2050iD 1-13
1
Introduction
Laser Safety Label
A laser safety label is attached to the outside of the machine as shown
below.
Ozone Release
CAUTION
Locate the Machine in a Well Ventilated Room
§ A negligible amount of ozone is generated during normal operation of
this machine. An unpleasant odor may, however, be created in poorly
ventilated rooms during extensive machine operations. For a
comfortable, healthy, and safe operating environment, it is
recommended that the room well ventilated.
REMARQUE
= Placer l’appareil dans une pièce largement ventilée =
Une quantité d’ozone négligable est dégagée pendant le fonctionnement de l’appareil quand
celui-ci est utilisé normalement. Cependant, une odeur désagréable peut être ressentie dans
les pièces dont l’aération est insuffisante et lorsque une utilisation prolongée de l’appareil est
effectuée. Pour avoir la certitude de travailler dans un environnement réunissant des
conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se
trouve l’appareil.
Acoustic Noise
For European Users
Machine Noise Regulation 3 GSGV, 18.01.1991: The sound pressure
level at the operator position according to EN 27779 is equal to or less
than 70dB(A).
1-14 D 1650iD/D 2050iD
Precautions
2 Precautions
2.1 Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the
machine in a location that meets the following requirements.
- A location away from curtains, etc. that may catch fire and burn easily
- A location that is not exposed to water or other liquids
- A location free from direct sunlight
- A location out of the direct airflow of an air conditioner or heater, and
not exposed to extremely high or low temperatures
- A well-ventilated location
- A location that is not exposed to high humidity
- A location that is not extremely dusty
- A location not subjected to undue vibrations
- A stable and level location
- A location where ammonia or other organic gases are not generated
- A location that does not put the operator in the direct airflow of exhaust
from the machine
- A location that is not near any kind of heating devices
2
Power Source
The power source requirements are as follows.
G Voltage fluctuation: Maximum ±10%
G Frequency fluctuation: Maximum ±3 Hz
H Use a power source with as little voltage or frequency fluctuations as
possible.
D 1650iD/D 2050iD 2-1
2
Precautions
Space Requirements
To ensure easy machine operation, supply replacement, and
maintenance, adhere to the recommended space requirements detailed
below.
D 1650iD
1099
*100 **400
D 2050iD
*100
599
1099
599
356
**400
356
995
1100
1352
1024
1069
252
Unit: mm
Note
Since there is a ventilation duct on the left side of the machine, be sure
to allow a clearance of *100 mm or more on the left side.
Allow a clearance of **400 mm or more on the right side of the
machine so that the side cover can be opened.
2-2 D 1650iD/D 2050iD
Precautions
2.2 Operation Precautions
Operating Environment
The environmental requirements for correct operation of the machine are
as follows.
G Temperature: 10°C to 30°C with fluctuations of no more than 10°C
within an hour
G Humidity: 15% to 85% with fluctuations of no more than 10% within an
hour
Proper Use
To ensure the optimum performance of the machine, follow the
precautions listed below.
- Never place heavy objects on the original glass or subject it to shocks.
- Never open any machine doors or turn off the machine while it is
making copies; otherwise, a paper jam will occur.
- Never bring any magnetized object or use flammable sprays or liquids
near the machine.
Always make sure that the power plug is completely plugged into the
electrical outlet.
- Always make sure that the machine’s power plug is visible and not
hidden by the machine.
Always unplug the machine from the electrical outlet if the unit is not
to be used for a long period of time.
Always provide good ventilation when making a large number of
continuous copies.
2
CAUTION
If the ventilation duct on the left side of the machine is blocked, the
inside of the machine will accumulate heat, resulting in a
malfunction or fire.
§ Be sure to allow a clearance of 100 mm or more on the left side of the
machine for the ventilation duct.
D 1650iD/D 2050iD 2-3
2
Precautions
CAUTION
The area around the fusing unit is extremely hot.
§ Be careful not to touch any parts around the fusing unit, other than
those indicated in this manual, in order to reduce the risk of burns. Be
especially careful not to touch parts marked with warning labels, and
their surrounding areas.
§ If you get burnt, immediately cool the skin under cold water, and then
seek professional medical advice.
2-4 D 1650iD/D 2050iD
Precautions
Transporting the Machine
If you need to transport the machine over a long distance, consult your
technical representative.
Care of Machine Supplies
Use the following precautions when handling the machine supplies (toner
cartridge, paper, etc.).
Store the supplies in a location that meets the following requirements.
Store in a sealed plastic bag in a cool, dark place paper that has been
- Only use toner that has been manufactured specifically for this
- Keep all supplies out of the reach of children.
CAUTION
Precautions for handling toner:
§ Be careful not to spill toner inside the copier or get toner on your
§ If your hands become soiled with toner, immediately wash them with
§ If toner gets in your eyes, immediately flush them with water, and then
2
Free from direct sunlight
Away from any heating apparatus
Not subjected to high humidity
Not extremely dusty
removed from its wrapper but not loaded into the machine.
machine. Never use other types of toner.
clothes or hands.
soap and water.
seek professional medical advice.
Storage of Copies
Copies that are to be kept for a long time should be kept where they
are not exposed to light in order to prevent them from fading.
- Adhesive that contains solvent (e.g., spray glue) may dissolve the
toner on copies.
D 1650iD/D 2050iD 2-5
2
2.3 Legal Restrictions on Copying
Certain types of documents must never be copied with the purpose or
intent to pass copies of such documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to
responsible copying.
Financial Instruments
G Personal checks
G Traveler’s checks
G Money orders
G Certificates of deposit
G Bonds or other certificates of indebtedness
G Stock certificates
Legal Documents
G Food stamps
G Postage stamps (canceled or uncanceled)
G Checks or drafts drawn by government agencies
G Internal revenue stamps (canceled or uncanceled)
G Passports
G Immigration papers
G Motor vehicle licenses and titles
G House and property titles and deeds
General
G Identification cards, badges, or insignias
G Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances to copy domestic or
foreign currencies, or works of art without permission of the copyright
owner.
When in doubt about the nature of a document, consult with legal counsel.
Precautions
2-6 D 1650iD/D 2050iD
Precautions
2.4 Components and Their Functions
2
1
4
No. Part Name Description
1 Automatic Document
Feeder AF-12 (optional)
2 Duplexing Document
Feeder AFR-19
(Option for the D 2050iD
only)
3 Original Cover Kit OC-8
(optional)
4 Job Separator JS-204
(optional)
5 Duplex Unit AD-17
(Option for the D 2050iD
only)
6 Multiple Bypass MB-6
(optional)
7 Paper Feed Unit PF-126
(optional: D 1650iD Up to
one, D 2050iD Up to four)
Automatically feeds one document sheet at a time for
scanning.
Also referred to as the “Document Feeder” throughout
the manual.
Automatically feeds one document sheet at a time for
scanning, and automatically turns over double-sided
documents for scanning.
Also referred to as the “Document Feeder” throughout
the manual.
Presses down on the loaded document to keep it in
place.
Also referred to as the “Original Cover” throughout the
manual.
Allows printed pages to be separated.
Automatically turns the pages over, and prints on both
sides. Also referred to as the “Duplex Unit” throughout
the manual.
Can be loaded with 100 sheets of paper.
Equipped with a paper drawer that can supply 250 sheets
of paper, for upper paper feed unit only.
Also referred to as the “Paper Feed Unit” throughout the
manual.
2
3
5
6
7
D 1650iD/D 2050iD 2-7
2
No. Part Name Description
8 32 MB/64 MB
Memory
M32-5/M64-4
(optional)*
9 Printer Controller
Pi 2001e (optional)*
10 Internet Fax & Network
Scan Kit SU-6
(optional)*
11 Network Interface Card
NC-6
(optional)*
12 Shifting Unit
OT-103 (optional)*
* The internal options are not shown.
Expanding the memory increases the number of
document pages that can be processed by the machine.
Also referred to as the “expansion memory” throughout
the manual.
An internal printer controller. This allows this machine to
be used as a computer printer.
For more details, refer to the Printer Controller Manual.
An internal Internet Fax & Network Scan Kit. Allows you
to use this machine as a network scanner.
For more details, refer to the User Manual for the Internet
Fax & Network Scan Kit SU-6.
By installing the Network Interface Card NC-6 into this
machine, network printing from Windows or a NetWare
network environment is possible.
Shifts copies and printed pages that are fed out. If the
Job Separator is installed, the Shifting Unit cannot be
attached.
Precautions
2-8 D 1650iD/D 2050iD
Loading...