Devcon 20845 User Manual

SAFETY DATA SHEET

Revision Date 04-Oct-2017 Version 8

1. IDENTIFICATION

Product identifier
Product Name

Other means of identification
Product Code
Synonyms

Recommended use of the chemical and restrictions on use
Recommended Use
Uses advised against

Details of the supplier of the safety data sheet
Manufacturer Address

ITW Permatex
6875 Parkland Blvd.
Solon, OH 44139 USA

DEVCON HOME 5-MINUTE EPOXY (HARDENER)

20845B
None

Epoxy curing agent
No information available

May Also Be Distributed by:

ITW Permatex Canada
35 Brownridge Road, Unit 1
Halton Hills, ON Canada L7G 0C6
Telephone: [phone]

24 Hour Emergency Phone Number

E-mail address

Classification
OSHA Regulatory Status

This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)

Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A

Label elements

Signal word
Warning

Causes skin irritation
Causes serious eye irritation

Chem-Tel: [phone]
International Emergency:
00+1+ 813-248-0585
Contract Number: MIS0003453

[e-mail]

Emergency Overview

_____________________________________________________________________________________________

Page 1 / 7

20845B - DEVCON HOME 5-MINUTE EPOXY

Revision Date 04-Oct-2017

(HARDENER)

_____________________________________________________________________________________________

Appearance Clear Physical state Liquid

Precautionary Statements - Prevention

Wash face, hands and any exposed skin thoroughly after handling
Wear eye/face protection

Precautionary Statements - Response

Specific treatment (see supplemental first aid instructions on this label)
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing

If eye irritation persists: Get medical advice/attention
IF ON SKIN: Wash with plenty of soap and water
If skin irritation occurs: Get medical advice/attention
Take off contaminated clothing and wash before reuse

Precautionary Statements - Storage

Store in a well-ventilated place. Keep container tightly closed

Precautionary Statements - Disposal

Dispose of contents/container to an approved waste disposal plant

Hazards not otherwise classified (HNOC)

Not applicable

Other Information

- Not applicable
Unknown acute toxicity 100 % of the mixture consists of ingredient(s) of unknown toxicity

Odor Mercaptan

3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance(s)

Chemical Name CAS No Weight-% Trade Secret

MERCAPTAN AMINE BLEND _ 60-100 *

2,4,6-TRIS(DIMETHYLAMINOMETHYL)PHENOL 90-72-2 10 - 30 *

4. FIRST AID MEASURES

Description of first aid measures
General advice
Eye contact

Skin contact

Inhalation

Ingestion

Self-protection of the first aider

Get medical advice/attention if you feel unwell.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if

present and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.

IF ON SKIN:. Wash with soap and water. Wash contaminated clothing before reuse. If skin
irritation persists, call a physician.

IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing. If symptoms persist, call a physician.

IF SWALLOWED:. Do NOT induce vomiting. Never give anything by mouth to an
unconscious person. Call a physician.

Use personal protective equipment as required.

_____________________________________________________________________________________________

Page 2 / 7

20845B - DEVCON HOME 5-MINUTE EPOXY

Revision Date 04-Oct-2017

(HARDENER)

_____________________________________________________________________________________________

Most important symptoms and effects, both acute and delayed
Symptoms
Indication of any immediate medical attention and special treatment needed
Note to physicians

See section 2 for more information.

Treat symptomatically.

5. FIRE-FIGHTING MEASURES

Suitable extinguishing media

Carbon dioxide (CO2), Dry chemical, Foam

Unsuitable extinguishing media

None.

Specific hazards arising from the chemical

None in particular.

Explosion data
Sensitivity to Mechanical Impact
Sensitivity to Static Discharge

Protective equipment and precautions for firefighters

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.

None.
None.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Personal precautions

Environmental precautions
Environmental precautions
Methods and material for containment and cleaning up
Methods for containment
Methods for cleaning up

Prevention of secondary hazards

Ensure adequate ventilation, especially in confined areas. Avoid contact with eyes and skin.
Use personal protective equipment as required.

See Section 12 for additional Ecological Information.

Prevent further leakage or spillage if safe to do so.
Ensure adequate ventilation. Soak up with inert absorbent material. Sweep up and shovel

into suitable containers for disposal.
Clean contaminated objects and areas thoroughly observing environmental regulations.

7. HANDLING AND STORAGE

Precautions for safe handling
Advice on safe handling

Conditions for safe storage, including any incompatibilities
Storage Conditions

Handle in accordance with good industrial hygiene and safety practice. Avoid breathing
vapors or mists. Avoid contact with skin, eyes or clothing. Wash thoroughly after handling.
Wash contaminated clothing before reuse. Use personal protective equipment as required.

Keep containers tightly closed in a dry, cool and well-ventilated place.

Incompatible materials

Strong oxidizing agents, Acids, Alkalis

_____________________________________________________________________________________________

Page 3 / 7

20845B - DEVCON HOME 5-MINUTE EPOXY

Revision Date 04-Oct-2017

(HARDENER)

_____________________________________________________________________________________________

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters
Appropriate engineering controls
Engineering Controls

Individual protection measures, such as personal protective equipment

Eye/face protection
Skin and body protection
Respiratory protection

General Hygiene Considerations

Showers
Eyewash stations
Ventilation systems

Tight sealing safety goggles.

Wear protective natural rubber, nitrile rubber, Neoprene™ or PVC gloves.

Use NIOSH-approved air-purifying respirator with organic vapor cartridge or canister, as
appropriate.

When using do not eat, drink or smoke. Regular cleaning of equipment, work area and
clothing is recommended.

9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
Physical state

Appearance
Odor
Odor threshold

Property Values Remarks • Method
pH
Melting point / freezing point
Boiling point / boiling range
Flash point
Evaporation rate
Flammability (solid, gas)
Flammability Limit in Air

Upper flammability limit:

Lower flammability limit:
Vapor pressure
Vapor density
Relative density
Water solubility
Solubility in other solvents
Partition coefficient
Autoignition temperature
Decomposition temperature
Kinematic viscosity
Dynamic viscosity
Explosive properties
Oxidizing properties

Liquid
Clear
Mercaptan
No information available

No information available
No information available
No information available
> 93 °C / > 200 °F Pensky-Martens Closed Cup (PMCC)
No information available
No information available

No information available
No information available
No information available
No information available

1.13
Insoluble in water
No information available
No information available
No information available
No information available
No information available
1000-1600 mPas
No information available
No information available

Other Information
Softening point

Molecular weight
VOC Content (%)
Density
Bulk density

No information available
No information available
0
No information available
No information available

_____________________________________________________________________________________________

Page 4 / 7

20845B - DEVCON HOME 5-MINUTE EPOXY

Revision Date 04-Oct-2017

(HARDENER)

_____________________________________________________________________________________________

10. STABILITY AND REACTIVITY

Reactivity

No data available

Chemical stability

Stable under recommended storage conditions

Possibility of Hazardous Reactions

None under normal processing.

Conditions to avoid

Excessive heat.

Incompatible materials

Strong oxidizing agents, Acids, Alkalis

Hazardous Decomposition Products

Carbon oxides
Nitrogen oxides (NOx)
Oxides of sulfur
Hydrogen sulfide

Information on likely routes of exposure

Inhalation
Eye contact
Skin contact
Ingestion

Chemical Name Oral LD50 Dermal LD50 Inhalation LC50

2,4,6-TRIS(DIMETHYLAMINOMET
HYL)PHENOL
90-72-2

Information on toxicological effects
Symptoms
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Sensitization

Germ cell mutagenicity
Carcinogenicity

Oral LD50
Dermal LD50

May cause irritation of respiratory tract.
Contact with eyes may cause irritation. May cause redness and tearing of the eyes.
May cause skin irritation and/or dermatitis.
Ingestion may cause irritation to mucous membranes.

= 1200 mg/kg ( Rat ) = 1280 mg/kg ( Rat ) -

No information available.

No information available.
No information available.
No information available.

10909.1 mg/kg

11636.4 mg/kg

12. ECOLOGICAL INFORMATION

Ecotoxicity

100 % of the mixture consists of components(s) of unknown hazards to the aquatic environment

Persistence and degradability

No information available.

_____________________________________________________________________________________________

Page 5 / 7