DEVA Broadcast DB90-TX, DB90-RX Setup Instructions

Publish Date: 24-Feb-2017

How can the DB90-TX be set

to act as a Streaming Audio Server,

sending audio to DB90-RX decoder/s

used as an IP Audio Client

SET-UP INSTRUCTIONS

Contents

General information .........................................................................................................................4

Point-to-point audio transmission .................................................................................................. 4

Point to multi-point audio transmission ......................................................................................... 5

DB90-TX and DB90-RX Set-up ...................................................................................................... 5

DB90-TX Streaming Audio Server Set-up ....................................................................................... 6

DB90-RX IP Audio client Set-up ..................................................................................................... 7

Appendix A ......................................................................................................................................... 8

Appendix B ....................................................................................................................................... 12

THIS PAGE

IS INTENTIONALLY

LEFT BLANK

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 4 -

General information

The IP Audio encoder and decoder are controlled trough a build in WEB Server and a standard
web browser is used to monitor their status or to make some adjustments. To operate the devices
you need to know their IP Address. In case you are not aware of the IP Addresses and how to open
the WEB interface, please refer to “Appendix A - DB90-TX Quick User Guide” on page 8 and

“Appendix B - DB90-RX Quick User Guide” on page 12.

This conguration allows two types of applications:

POINT-TO-POINT AUDIO TRANSMISSION

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 5 -

POINT TO MULTI-POINT AUDIO TRANSMISSION

IMPORTANT NOTE: One DB90-TX can send audio to maximum ten DB90-RXs. However,

in order for stable connectivity to be guaranteed, the recommended number of clients is 8.

DB90-TX AND DB90-RX SET-UP

Prior to implementing the below written adjustments, the following requirements should be

fullled:

• DB90-TX must have a static IP address;

• If the device is placed behind a router, you will have to make sure that the Stream Server

Port is properly NAT forwarded;

• DB90-RX may have a dynamic IP address;

• DB90-RX should have access to DB90-TX over the network (Internet or LAN).

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 6 -

DB90-TX STREAMING AUDIO SERVER SET-UP

1. Go to Conguration> IP Audio;

2. Choose the preferred audio signal input;

3. Assign Encoder + Sample rate and the desired Signal Quality. The combination of these

parameters will dene the required minimum bandwidth of your network connection;

4. Then in Stream Settings section – specify the Port to be used and the Maximum supported
connections;

5. Preferably change the Name of the stream to identify you server easily;

6. Press [Save] to save the applied changes.

For detailed information and instructions on how communication with the DB90-TX can be

established, please refer to “Appendix A - DB90-TX Quick User Guide” on page 8.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 7 -

DB90-RX IP AUDIO CLIENT SET-UP

1. Go to Conguration> IP Audio;

2. In IP Audio Client section – URL of the DB90-TX Server should be specied. The URL is a
mandatory requisite needed in order for a connection with the server to be established. The
URL could be compound of DB90-TX’s IP Address and Server Port, ex. 192.168.120:5000;

3. Choose the preferred decoder, prebuffer and specify buffer timeout. The decoder set in

the DB90-RX must match the encoder specied in DB90-TX;

4. If needed, set new gain adjustment settings;

5. From the Source priority Section set the priority of the IP Audio Client;

6. Press [Save] to save the applied changes;

7. Apply the same settings to all IP Audio clients to be used in the conguration.

For detailed information and instructions on how communication with the DB90-RX can be

established, please refer to “Appendix B - DB90-RX Quick User Guide” on page 12.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 8 -

Appendix A

DB90-TX

IP Audio Encoder

Quick User Guide

BEFORE YOU USE THIS PRODUCT

In order to be able to enjoy all the benefits of owning your new

DEVA product, please verify first that the latest software and

firmware release were installed.

Visit www.devabroadcast.com/downloads for the most

recent software and firmware downloads, prior the installation.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 9 -

This Quick user guide will make the installation of DB quick and easy these , yo

ca simplify the process and save yourself extra time and effort

90-TX . Following steps u

n . For more information about the Safety

precautions and the Operating environment recommendations please refer to the User Manual.

1. The encoder has to be connected to the local network or Internet by cable with RJ-45 connector;

2. As only one input at a time can be managed by the encoder, please select the preferred signal

source input - either analog or digital one:

For use a cable that ends with two standard RCA jacks to connect the analog signal
source to the analog audio inputs of DB90-TX;
For use a cable that ends with standard RCA jack to connect the S/PDIF signal
source to the digital audio input of DB90-TX;

3. Connect the device to the power supply.





Analog audio

Digital audio

Open a WEB Browser and enter the device IP Address in the browser's address field, them press

Enter. : ;

;

The web interface will be displayed to you with the respective main pages Status Configuration;

Factory Defaults Reboot; Firmware Update.

Current status information will be displayed comprising Audio Status; Network Status;

onnection Status

For further reference see the detailed explanation on the right part of the screen.

: Active

c s .

Click on the button.

Fill in the username and

password requested, default values being: se

and ass .

Configuration Dialog box similar

to the following will appear.

u rname:

p word:user pass

NOTE: Clicking on the icon will toggle live data andLIVE DATA ON OFF

DB90-TX is controlled trough a build in WEB Server and a standard web browser can be used to

monitor its status or to make some adjustments.

To operate the device you need to know its IP Address. In case you are not aware of it, you can hear it
through the headphones when you turn on the the device. Alternatively,use the Network discovery feature
at Local networks ( ).for reference see tepS 9

WEB Interface

STEP 3

Configuration

STEP 2

Connection

STEP 1

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 10 -

General Network ettingsS

If you plan to use static settings please disable the DHCP and fill in the
information requested - IP Address, Netmask, Gateway, Primary and
Secondary DNS. Otherwise, enable the DHCP.

SNMP Settings

Press the to download the latest available DB90 TX
SNMP MIB file. Then Agent ID, Agent Port, Community, Manager IP
and Manager Port.

is used to identify the device among others when a SNMP

notification is send. Agent - enables/disables SNMPAgent.

Download button

specify

Agent ID

-

Web erver ettingsS S

In order to enhance the security of DB90-TX you can set new username
and password. In case a dialog box appear, fill in the NEW username and
password requested.

u p d fieldsNOTE: If sername and asswor are left blank, security is used.NO

NOTE: The MIB file may vary from one firmware revision to another.

Downloading this file from the device guarantees that you have the
proper MIB file.

Audio Settings

Choose the preferred audio signal source. Assign Encoder +Sample rate
and th signal quality. The combination of these parameters will
define the of your Internet connection.

PCM will quality but Network andwidth will be
required

e desired

required bandwidth

improve the , higher b

consequently.

NOTE:

RTPAudio Player

The RTP Settings require Server Address and Port to be
entered.

Decoders'

Icecast Audio Player

If DB90-TX is used as Icecast Source Mount point
Address and Port should be .

an , Encoder IP

filled in

The username and password are used to secure the connection. Make
sure to enter the same information on both sides of the connection.

Stream Settings

Preferably c DB90-TX

d the s

hange the name of the .

If you decide to use the Stream Server you should make adjustments to

the Port an maximum connection which will be supported.

Later on it will be used as a
title name on all WEB pages. Customizing the name will make the device
more recognizable.

NOTE: For more information refer to the help section on the right part of the

screen, containing brief information about each of the fields. For field
description display, point the mouse cursor on the fields on the right.

NOTE: The selected encoder must match the settings of the decoders on

the other side of the connection.

Network Configuration

STEP 4

IP Audio Configuration

STEP 5

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 11 -

1. on

l

2.

3. .

4.

displayed A

w.

displayed t, m Step 7

Open Advanced sharing settings by clicking the , and then . In the
search box, type , click , and then, in the left pane click

.
Select your current network profile.
Click , and then click Save changes If you're prompted for an

administrator password or confirmation, type the password or provide confirmation.

To access the device open a new Explorer bar and click on . If you have successfully enabled

the network discovery option, the device will be . double click on will open a new
WEB browser windo

If you have already enabled this function on your computer just open a new Explorer bar and click
on . The device must be . If no follow the instructions fro .

Start butto Control Panel

network Network and Sharing Center

Change advanced sharing settings

Turn on network discovery

NOTE

n " "

" " " "

" "

Network

DB90-TX

:

Network

Enjoy the work with DB90TX - a product of superb quality and functionality.

For detailed explanations concerning the device refer to its complete manual.

To update the device firmware please
select the new firmware file. Press the
Upload button. A dialog window will appear

ait for the

process to complete.

,

.

firmware update and w

The latest Firmware file can be

downloaded from www.devabroadcast.com

Confirm

NOTE:

Firmware pdateU

This process will fully restore DB90- X to its Factory Defaults, including the Network settings. To start
a Hardware Reset, disconnect the power supply cable from the unit. Then locate the RESET button on
Rear panel, press and hold it. Afterwards, connect the power supply cable to the unit and keep the RESET
button h ld until the PWR led starts blinking. Release the RESET button and ait for DB90- X to reboot
with the factory default settings.

T

e w T

Hardware eseR t

To restore DB90- X to its Factory Defaults
you should first press the Restore button. A
new window will appear: confirm that you
want to restore factory defaults and wait for
the process to complete. All settings will be

restored to their factory defaults except for
Network and WEB server Settings which remain unchanged On completion of the process the settings
should have the proper default values.

T

.

The Factory Defaults page

To start Rebooting of DB90- X press the

Reboot button. A dialog warning window will

appear. Confirm that you want to reboot the

device and wait for the process to complete.

T

Rebooting

Factory Defaults, Reboot, Firmware Update

STEP 6

Network discovery for Windows 7

STEP 7

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 12 -

Appendix B

DB90-RX

IP Audio Decoder

Quick User Guide

BEFORE YOU USE THIS PRODUCT

In order to be able to enjoy all the benefits of owning your new

DEVA product, please verify first that the latest software and

firmware release were installed.

Visit www.devabroadcast.com/downloads for the most

recent software and firmware downloads, prior the installation.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 13 -

This Quick user guide will make the installation of DB quick and easy these , yo

ca simplify the process and save yourself extra time and effort

Preferably, connect the device to a DHCP Server net from which DB90 RX will receive an IP

address.

90-RX . Applying steps u

n .

work -

For more information about the Safety

precautions and the Operating environment recommendations please refer to the User Manual.

NOTE:

To operate the device you need to know its IPAddress. In case you are not aware of it, you can hear it
through the headphones when you turn on the the device. Alternatively,use the Network discovery feature
at Local networks ( ).for reference see tepS 9

1. ;

2. Connect the DB90-RX to the power supply.

Connect the device to a local network or to the Internet by a cable with an RJ-45 connector

Open a WEB Browser and enter the device IP address in the browser's address field press
Enter.

, then

The web interface will be displayed to you with the respective main pages Status Configuration;
Factory Defaults Reboot; Firmware Update.

: ;

;

Current status information will be displayed comprising Audio Status; Network Status; Connection

Status

For further reference see the detailed explanation on the right part of the screen.

.

Click on the button.

Fill in the username and

password requested, default values being: ser

and ass .

Configuration Dialog box similar

to the following will appear.

u name:

p word:user pass

NOTE: Clicking on the icon will toggle live data andLIVE DATA ON OFF

Connection

STEP 1

WEB Interface

STEP 2

Status Section

STEP 3

General Settings

STEP 4

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 14 -

General Network ettingsS

If you prefer to use static settings please disable the DHCP and fill in the
information requested - IP Address, Netmask, Gateway, Primary and
Secondary DNS. Otherwise, enable the DHCP.

IP PlayerAudio

DB90-RX has one main URL and two alternative Stream Audio Sources

. Switching between streams is immediate . When
current Stream is URL2 or URL3 and connection to URL1 is restored there
will be an instantaneous switch back to URL1.

If the server does NOT use Port 80 you should enter URL and Port

. For example

on audio loss

of the

Encoder 192.165.1.21 .

URL2, URL3

:2100

SNMP Settings

proper -Press the to download the DB90 RX SNMP
MIB file. Then Agent ID, Agent Port, Community, Manager IP and
Manager Port.

is used to identify the device among others when a SNMP

notification is send. Agent - enables/disables SNMPAgent.

Download button

specify

Agent ID

Web erver ettingsS S

In order to enhance the security of DB90-RX you can set new username
and password. A dialog box requesting your NEW username and password
may appear.

u p d fieldsNOTE: If sername and asswor are left blank, security is used.NO

NOTE: The selected players' decoders must match the settings of the

encoder devices on the other side of the connection.

Source Priority

DB90-RX has one main and two backup audio sources. If the audio signal
of the main source disappear the device will switch to the first available
backup source.

When the main audio signal is recovered DB90-RX will automatically
switch back to it. Depending on your needs the priority of the connections
should be specified.

Other Settings

By choice, you can change the name of the device. Later on it will be used
as a title name on all WEB pages. Customizing the name will make the
device more recognizable.

RTP Audio Player

Choose a port and decoder.

Icecast Audio Player

Choose a port and decoder. The username and password are used to
secure the connection. Make sure to enter the same on both sides.

Audio Loss and Audio Recover

Select the appropriate levels of loss and recovery of the audio signal.
Do not forget to set the timeout.

Set wether the loss of audio should be registered by the one channel only
or for both of them.

Analog Audio Output

Adjust the analog output level of the device.

Network Configuration

STEP 5

P Audio ConfigurationI

STEP 6

Backup Audio Configuration

STEP 7

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: [phone], Fax: [phone]

E-mail: of[e-mail] ,Web: www.devabroadcast.com

- 15 -

1. on

l

2.

3. .

4.

displayed

w.

displayed mStep 9

Open Advanced sharing settings by clicking the , and then . In the

search box, type , click , and then, in the left pane click

.
Select your current network profile.
Click , and then click Save changes If you're prompted for an

administrator password or confirmation, type the password or provide confirmation.

To access the device open a new Explorer bar and click on . If you have successfully enabled

the network discovery option, the device will be . Double click on will open a new
WEB browser windo

If you have already enabled this function on your computer just open a new Explorer bar and click

on . The device must be . If not follow the instructions fro .

Start butto Control Panel

network Network and Sharing Center

Change advanced sharing settings

Turn on network discovery

NOTE:

n " "

" " " "

" "

Network

DB90-RX

Network

Enjoy the work with DB90RX - a product of superb quality and functionality.

For detailed explanations concerning the device refer to its complete manual.

To update the device firmware, please
select the new firmware file. Press the
Upload button. A dialog window will appear

ait for the

process to complete.

.

firmware update and w

The latest Firmware file can be

downloaded from www.devabroadcast.com

Confirm

NOTE:

Firmware pdateU

This process will fully restore DB90-RX to its Factory Defaults, including the Network settings. To start
a Hardware Reset, disconnect the power supply cable from the unit. Then locate the RESET button on
Rear panel, press and hold it. Afterwards, connect the power supply cable to the unit and keep the RESET
button hold until the POWER led starts blinking. Release the RESET button and ait for DB90-RX to
reboot with the factory default settings.

w

Hardware eseR t

To restore DB90-RX to its Factory Defaults
you should first press the Restore button. A
new window will appear: confirm that you
want to restore factory defaults and wait for
the process to complete. All settings will be

restored to their factory defaults except for
Network and WEB server Settings which remain unchanged On completion of the process the settings
should have the proper default values.

.

The Factory Defaults page

To start Rebooting of DB90-RX press the

Reboot button. A dialog warning window will

appear. Confirm that you want to reboot the

device and wait for the process to complete.

Rebooting

Factory Defaults, Reboot, Firmware Update

STEP 8

Network discovery for Windows 7

STEP 9