DEVA Broadcast DB44 Quick User Manual

65 Aleksandar Stamboliyski Str., 8000 Burgas, Bulgaria

Email: [e-mail], Web: www.devabroadcast.com

Tel.: [phone], Fax: [phone]

Quick User Guide

DB44

Compact FM Radio Monitoring Receiver

BEFORE YOU USE THIS PRODUCT

In order to be able to enjoy all the benefits of owning your new

DEVA product, please verify first that the latest software and

firmware release were installed.

Visit www.devabroadcast.com/downloads

recent software and firmware downloads, prior the installation.

DEVA Broadcast Limited is an ISO 9001:2008 certified company.

for the most

This Quick user guide will make the installation of DB44 - Compact FM Radio Monitoring Receiver
quick and easy. Applying these principles, you can simplify the process and save yourself extra time and
effort. For more information about the Safety precautions and the Operating environment

recommendations please refer to the User Manual.

STEP 1

? Install the unit on its operation place;
? Connect the device to 12V DC network using the provided adapter;
? Connect the antenna cable to the RF antenna input connector located on the rear panel of the device;
? Connect DB44 to the TCP/IP network using a direct network cable;
? Connect the optional GSM modem via the supplied connection cable.

NOTE: a

Please, locate and select proper place for the GSM antenna for achieving better GSM network

Connection

coverage.

STEP 2

After connecting the network cable the LED 'LAN' indicator located on the rear panel must be ON or

flashing. These are the Default Network Settings:

Network Settings

(1)

IP: 192.168.1.2
Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1

1

DHCP: Disabled
HTTP Port: 80

NOTE: DB44 has an assigned Static IP address. In order to establish a communication, your PC should

be connected to the same Sub network as the device. For further information consult with your

network administrator.

STEP 3

WEB Interface

DB44 is controlled through a built-in WEB Server and a standard web browser can be used to monitor

its status or to make some adjustments. To operate the device you need to know its IP address and follow

these steps:

1. Open a new WEB Browser;

2. Enter the device IP address in the Address field and press “Enter”;

3. A window requiring a username and a password will appear. Default values are username: user and
password: pass (For more information refer to Step 5).

In case you are not aware of the IP Address, use the Network discovery feature at Local

networks or refer to Step 4.

NOTE: If the port is different than the default one (80), it is need to be specified. For example:

http://192.168.1.2:9000

STEP 4

Network discovery is a network setting that defines whether your computer can see (find) other
computers and devices on the network and whether other computers on the network can see your
computer. By default, Windows Firewall blocks network discovery but you can enable it.

1. Open Advanced sharing settings by clicking the Start button, and then click on "Control Panel". In the

search box, type "network", click "Network and Sharing Center", and then, in the left pane click

"Change advanced sharing settings".

2. Select your current network profile.

3. Click "Turn on network discovery", and then click "Save changes". If you're prompted for an

administrator password or confirmation, type the password or provide confirmation.

Network Discovery for Windows 7

4. To access the device, open a new Explorer bar and click on . If you have successfully

enabled the network discovery option, the device will be displayed. Double click on will open

a new WEB browser window requiring a username and a password.

(For more information refer to Step 5)

Network

(1)

DB44 (2)

2

1

NOTE: If you have already enabled this function on your computer just open a new Explorer bar and click

on . The device will be displayed. If not, follow the instructions from Step 4.Network (1)

STEP 5

WEB Interface Login

DB44 provides you with a protected access to the device settings.
The device serves only one user at a time, thus username and password will be requested when login.

Default values are user and pass.

STEP 6

WEB Interface Operation

After successful log in the Control Window will look like this:

The Web Interface is visually divided into three parts:

?Top - Navigational Menu;
?Middle - Specific contextual readings;
?Bottom - General Tuner and Channel readings, functional buttons.

NOTE: Nevertheless the current menu of the WEB Interface, .

the bottom section is constantly displayed

This allows immediate tuner interactions.

Please refer to the User manual for detailed information on

how to configure and explore your device.