Deuter Freerider Pro 30 User Manual

Page 1
FREERIDER PRO 30
Colour: black Article ID: 3303417-7000 Weight: 1720 g Volume: 30 litres Size: 56 / 32 / 22 (H x W x D) cm MSRP: 159,95 €
The new Freerider backpack first strikes because of its modern and clean design. The attachment loops and webbings can be stored in garages in the front of the pack. The further developed Deuter Alpine comfort carry system guarantees a comfortable day-tour even with heavier loading.
The ski & snowboard pack also offers several storing options inside to keep items like goggle, shovel etc. safe.
Page 2
HIGHLIGHTS OF FREERIDER PRO 30
Alpine System
For alpine backpacks the combination of comfort, durability, functionality and low weight is essential. Deuter’s Alpine System answers this challenge by focusing on a compact, secure yet comfortable fit with its two flexible softstripe back pads that are perfectly adapted to the anatomy and follow the wearer’s movements. In combination with the pack’s sleek shape this keeps the load always close to the centre of gravity – thus guaranteeing full pack control.
Padded Hip Belt
An additional padding on the hip belt provides more carrying comfort.
Valuables Pocket
special pocket on the inside of the pack to keep valuable items safe
SOS-Label
provides the most important tips in case of emergency
Delrin Frame
Tensioned Delrin® U Frame provides stability with little extra weight.
Vari Flex System
Deuter's Vari Flex System, leaving the generous hip fins fully mobile. The Vari Flex hip fins follow even the most complex movements allowing tricky sections to be negotiated without losing yor balance - especially important when carrying a hefty load.
Stretch Compartment
stretch compartment on the inside of the back to stowe sweaty/wet clothes
Sitting Mat
Removable Foam Mat to sit on and keep your pants warm and dry
Rear Access Zipper
The pack can be opened with a zipper on the back to access all items on the mountain while keeping the back system nice and clean.
Sternum Strap
The sternum strap stabilizes the pack on the shoulders.
Helmet Holder
The included helmet holder can be fixed on the front of the pack and holds the helmet safe on the backpack.
Ski Fixation
attachment for skis
Board Fixation
attachment for snowboard or snowshoes
Hiking Pole Attachment
Attachment loops for hiking poles
Shovel Pocket
reinforced compartment for shovel
Attachment for ice axe or hiking poles
Attachment loops for ice axe or poles
Pull-Forward Hip Fin
allows an easy and precise adjustment
SUITABLE FOR
Alpine Skiing Ski Touring
Snowboarding
Hydration System 3.0 L Compatible
compatible with Streamer 2.0 l & Streamer 3.0 l
Load Adjustment Straps
to individually adapt the pack’s centre of gravity
Page 3
Page 4
BACK SYSTEM: ALPINE SYSTEM (SKI)
TO ENSURE A STABLE BALANCE AND TO CONSERVE
1
energy when carrying medium to heavy loads in alpine terrain the Alpine Back System keeps the load close to the body’s centre of gravity. The Softstripe pads on these slim-line alpine backpacks adapt to the wearers back with every movement for a close and reliable fit. The channel between the pads provides extra comfort by creating a “chimney” effect ventilation.
CARRYING COMFORT AND A PERFECT FIT
2
through ergonomically cut, S-shaped shoulder straps. The SL­backpack also boasts Soft-Edge comfort straps.
GOOD LOAD TRANSFER COMBINED WITH MINIMUM WEIGHT
3
thanks to an flexible Delrin® U-frame. It follows the most varied movements with absolute ease.
2
1
3
MATERIAL
420D PA
Special high density 420 denier polyamide offers high abrasion resistance with it's very tight weave. This top quality fabric is used for Guide backpacks and Travel range models. PU coating.
Loading...