Detecto 8500 Stretcher Scale, 6570 Wheelchair Scale with Handrail and Seat, 6400 Wheelchair Scale, 6600 Bariatric Wheelchair Scale, 6560 Wheelchair Scale with Handrail RAMP INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

FOR DETECTO PORTABLE

WHEELCHAIR AND

STRETCHER SCALE RAMPS

UNPACKING

Before starting to assemble, please unpack and remove all wrappings and fillers. Carton contains:

Item Description Part Number Qty.

6400, 6500, 6550, 6560, and 6570 Ramp Weldment 0065-0675-0A 2
6600 and BRW1000 Ramp Weldment 0065-0731-0A 2
8500 and 8550 Ramp Weldment 0065-0821-0A 2
.25-20 X .438” Flat-Head Socket Cap Screw Zinc Plated

5/32” Short Hex Key M220-0080-00

0.5 ml Packet High Strength Thread Locker 6560-1046

ASSEMBLY

Refer to Figures No. 1, 2, and 3, then follow the instructions for attaching the ramps.

NOTE: On the 6550, 6560, 6570, and 8550, ensure the column(s) are locked onto scale platform.

1. Lift scale and place the platform on its side in the transport position. Have an assistant hold the platform
while installing the ramps.

2. Attach each ramp in the following sequence:

 Begin with top rubber mount. Apply thread locker to first screw. Then, while holding ramp against

top rubber mount, hand thread screw into top rubber mount (Figure No. 1).

 Next, apply thread locker to second screw, and while holding ramp against bottom rubber mount,

hand thread screw into bottom rubber mount.

 Tighten both screws with supplied 5/32” Short Hex Key (Figure No. 2).

NOTE: When installing screws into rubber mount, be careful not to over-tighten.

3. Repeat Step 2 for ramp on other side of platform. Finished assembly should look like Figure No. 3.

6021-1812

4
1
1

Figure No. 1 Figure No. 2

Printed in USA

0065-0720-0M Rev C 02/19

Figure No. 3

Cardinal Scale Manufacturing Co.
203 E. Daugherty, Webb City, MO 64870 USA
Ph: 417-673-4631 or 1-800-641-2008
Fax: [phone]

Technical Support: 1-866-254-8261
E-mail: [e-mail]