Desco TB-7000 Service Manual

DESCO INDUSTRIES INC. Technical Bulletin TB-7000

Reztore™ Surface & Mat Cleaner
Application Instructions

Figure 1. Reztore™ Surface & Mat Cleaner:
16 ounce (500 ml) spray bottle
1 quart (1 litre) spray bottle

2.5 Gallon (10 litre) Bag-in-Box

Description

Reztore™ Surface & Mat Cleaner is a non-toxic liquid
cleaner used to remove dust, grease, grime, fingerprints,
and solder flux from all surfaces used in a static sensitive
area. Reztore™ Surface & Mat Cleaner leaves no insulative
residue, contains no alkali or ammonia, and is nonflammable.

General Guidelines

Reztore™ Surface & Mat Cleaner is a liquid cleaner which
can be used on a variety of surfaces, especially surfaces
used in a static sensitive environment. Surfaces include but
are not limited to: rubber, vinyl and polyethylene table and
floor mats, field service kits, laminated table tops, tote boxes,
epoxy, painted surfaces, plexiglass, glass, metal, 3-ring
binders, computer screens, computer keyboards, shelving,
push carts, conveyor belts, etc.

Made in America

Directions

Smooth Surfaces:

Apply Reztore™ Surface & Mat Cleaner to the entire surface
to be treated using either the pump or trigger spray bottle.
Use a lint-free cloth to wipe the surface until dry. For set
stains, let Reztore™ Surface & Mat Cleaner soak on the
surface for 30 seconds before wiping clean.

Figure 2. Applying Reztore™ to the mat.

Other Surfaces - Keyboards:

Dampen a lint-free cloth or a lint-free swab with Reztore™
Surface & Mat Cleaner. Wipe surface to be cleaned using
either the cloth or swab. The swab will work best for tight
spots like between keyboard keys. Use the cloth to wipe
clean the remaining surfaces of the keyboard.

Note: Cleaners containing silicone will leave an insulative
film. A dissipative ESD worksurface may not fulfill its function
if covered by an insulative layer. Many general purpose
cleaners contain silicone.

“Periodic cleaning, following the manufacturer’s
recommendations, is required to maintain proper electrical
function on all work surfaces. Ensure that cleaners that are
used do not leave an electrically insulative residue common
with some household cleanersd that contain silicone.” (ESD
Handbook ESD TR20.20 section 5.3.1.14 Worksurface
Maintenance)

“Only cleaning materials or processes which do not degrade
the properties of the ESD protective items, shall be used.”
(EN 61340-5-1 clause 5.5 EPA working practices)

DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone] • Web Site: DescoIndustries.com

TB-7000 November 2010 Page 1 of 5

Figure 3. Cleaning a keyboard or computer screen with
Reztore™ Surface & Mat Cleaner.

On non-ESD surfaces, we recommend using Reztore™
Topical Antistat static dissipative coating. While coating is
on the surface it will enhance existing ESD surfaces and will
give dissipative electrical properties to insulative surfaces.

© 2010 DESCO INDUSTRIES INC.

Employee Owned

Specifications

Appearance of solution: Transparent violet

pH: 6-8

Odor: Slight floral

Solubility: Water, acetone,

alcohols

Toxicity, Irritation, Sensitivity: Non-toxic by dermal
contact, or inhalation

Flammability: Non-flammable

Ion Level: (mg/l)

Fluoride 0.3
Sulfate <0.5
Nitrate 1.2
Bromide <0.5
Phosphate <0.5

Electrical Properties (Dry Film)
10E7 - 10E8 ohms

(ref. ANSI/ESD S4.1)
Static Decay Rate: <.01 seconds
(per FTMS 101C
Method 4046)

Limited Warranty

Desco Industries Inc. expressly warrants that for a period
of one (1) year from the date of purchase, our Reztore™
Surface & Mat Cleaner will be free of defects in material.
Within the warranty period, the material will be replaced
at our option, free of charge. Call our Customer Service
Department at 781-821-8370 or 00 44 (0) 1892-665313
in Europe for a Return Material Authorization (RMA) and
proper shipping instructions and address. You should
include a copy of your original packing slip, invoice, or
other proof of purchase date. Any material under warranty
should be shipped prepaid to the Desco Industries Inc.
factory. Warranty replacements will take approximately
two weeks.

Warranty Exclusions

THE FOREGOING EXPRESS WARRANTY IS MADE
IN LIEU OF ALL OTHER PRODUCT WARRANTIES,
EXPRESSED AND IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED.
The express warranty will not apply to defects or damage
due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair
products.

Testing

It is recommended to test the surfaces after cleaning to
ensure that all insulative contaminants such as dirt and grime
have been removed. Reztore™ Surface & Mat Cleaner was
designed to leave behind a coating which has a surface
resistance of 108 ohms or lower.

FIELD TEST:

For quick and easy verification of surface resistance we
recommend the use of a megohmmeter. These are available
from many Desco Industries companies. For testing of static
fields, we recommend the use of a static field meter. These
instruments are also available from many Desco Industries
companies.

Features

• Cleans bench surfaces

• Leaves static dissipative layer on surface

• Non-toxic

• Non-streaking, quick drying

• Non-aerosol

• No CFC’s - water based

• No alkali or ammonia

• Neutral pH

• Low Volatile Organic Solvents

Limit of Liability

In no event will Desco Industries Inc. or any seller be
responsible or liable for any injury, loss or damage, direct
or consequential, arising out of the use of or the inability to
use the product. Before using, users shall determine the
suitability of the product for their intended use, and users
assume all risk and liability whatsoever in connection
therewith.

NOTE: Reztore™ Surface & Mat Cleaner product does
not have a set life span. The chemicals are not known to
degrade over time when stored at the proper temperature
conditions as stated in the Material Safety Data Sheet. We
also recommend that this product be stored in its original
container and be sealed when not in use.

DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone] • Web Site: DescoIndustries.com

TB-7000 Page 2 of 5

© 2010 DESCO INDUSTRIES INC.

Employee Owned

Flammability

Material Safety Data Sheet

May be used to comply with ANSI Z400.1-2004, 29 CFR

1910.1200, European 2001/58/EC, REACH 1907/2006/
EC, and GHS. Standards must be consulted for specific
requirements.

HMIS RATING: Health 1, Flammability 1, Physical Hazard 0, Personal Protection B

NFPA Designation 704

Degree of Hazard
4 = Extreme 1 = Slight
3 = High 0 = Insignificant
2 = Moderate

Special Hazard

Health

(Blue)

1

(Red)

1

0

Reactivity

0

(Yellow)

SECTION 1 — CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name/Identity: Reztore™ Surface and Mat Cleaner

Chemical Name: Cleaner, ESD Surface & Mat

Manufacturer: Desco Industries, Inc
Address: One Colgate Way

Canton, MA 02021

Telephone: [phone]
Emergency Number: 781-821-8370
Date Prepared: 2010-02-04

SECTION 2 — HAZARDS IDENTIFICATION

Routes of Entry
Eyes: A high concentration of liquid, mist, or vapour may cause irritation of the

connective tissue.
Skin: Repeated or continuous contact may cause irritation of the skin.
Ingestion: None known.
Inhalation: Irritation of nose, throat, and lack of breath. Exposure to vapors in high

concentration may have effect as with inhalation.

SECTION 3 — COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous Ingredients: CAS No. Weight (%)

Trade Secret #030507MA105 Non Hazardous 1-5%
Isopropanol* 67-63-0 5-25%
Water 7732-18-5 60-100%

*These items are listed and subjected to the reporting requirements of the SARA Title III Section 313 Inventory of
the Emergency Planning and Community Right-To-Know Act of 1986 and of 40 CFR372.

SECTION 4 — FIRST AID MEASURES

Eye Contact: Flush with water for at least 15 minutes.
Skin Contact: Wash with soap and water.
Ingestion: DO NOT induce vomiting. Contact a physician.
Inhalation: Move subject to fresh air.

SECTION 5 — FIREFIGHTING MEASURES

Proper Extinguishing Media: Water
Unsuitable Extinguishing Methods: N/A
Protective Equipment & Precautions: Wearing of appropriate protective equipment and clothing.
Flash Point (Method Used): N/A
Flammable Limits: N/A

Special Fire Fighting Procedures: Cool containers with water.
Unusual Fire and Explosion Hazards: None known.

SECTION 6 — ACCIDENTAL RELEASE MEASURES

Personal Precautions: Wearing protective clothing. Inhalation protection. Extinguish all ignition

sources.

Environmental Precautions: Biodegradable.

Cleaning Procedures: Dike and collect material into plastic container. Water rinse and drain,

flush small amounts. Use sanitary landfill disposal. Follow state and local

regulations (RCRA; Subtitle D).

DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone] • Web Site: DescoIndustries.com

© 2010 DESCO INDUSTRIES INC.

TB-7000 Page 3 of 5

Employee Owned

SECTION 7 — HANDLING AND STORAGE

Handling: Use in well-ventilated areas; avoid breathing vapors. Keep containers

closed when not in use. Avoid from freezing.

Storage: Storage temperature: Max. 49°C/120°F 1°C/34°F

Keep from freezing.

SECTION 8 — EXPOSURE CONTROL / PERSONAL PROTECTION

Hazardous Ingredients: CAS No. TLV-value

Trade Secret #030507MA105 Non Hazardous NE
Isopropanol* 67-63-0 400 ppm
Water 7732-18-5 NE

Control Parameters: TLV-valve 400 ppm maximum for Isopropanol
Measures for Technical Control: Preferences of technical measure to prevent or control contact with the

product. Isolating process and personnel, mechanical ventilation (dilution

and local exhaust) and the regulation of process conditions. In case of

non-prevention or non-control, a proper protective wearing should be used.
Respiratory Protection (Specify Type): Wear MSHA/NIOSH approved respirator where exposure limits are
exceeded.
Hand Protection: Impervious/Neoprene Gloves
Eye Protection: Safety glasses or Chemical splash goggles as defined in ANSI Z-87.1 or a

similar standard.
Work/Hygienic Practices: Wash hands before eating, smoking, or using washroom facilities.

SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES

Form: Liquid

Colour: Clear violet
Odor: Floral Alcohol

Boiling Point: >200°F (93.3°C)
Melting Point: N/A
Specific Gravity (H2O = 1): .98

Solubility in Water: Complete
pH: 7.0-8.0
VOC per Method 24 of EPA: 1% VOC by wt.
Flash Point: Noncombustible
Flammability Limits: N/A
(vol. % in air)
Vapor Pressure (mm Hg): 18.0
Vapor Density (air=1): 1.06
Density at 20°C: 8.17 lbs./gal
Specific Gravity (H20=1): .98
Flammability: Classification according to EC-regulations “non-flammable”
Ignition Temperature: N/A
Evaporation Rate: .28

SECTION 10 — STABILITY AND REACTIVITY

Hazardous Decomposition/Byproducts: Thermal decomposition may yield carbon monoxide.
Incompatibility (Materials to Avoid): Strong Oxidizers
Stability/Reactivity: Stable product at normal conditions.
Conditions to Avoid: Temperatures above 120°F (49°C) and below 34°F (1°C)
Hazardous Polymerization: NE

SECTION 11 — TOXICOLOGICAL INFORMATION

All information refers to the main component Isopropanol

N/A = Not Applicable; NE = None Established

DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone] • Web Site: DescoIndustries.com

TB-7000 Page 4 of 5

© 2010 DESCO INDUSTRIES INC.

Employee Owned

Acute toxicity: None known
Special Effects: None known

SECTION 12 — ECOLOGICAL INFORMATION

No environmental hazards have been reported or known.

Mobility: The product is aqueous and will be separated in aqueous conditions
Degradability: N/A
Bioaccumulation: Not likely
Ecotoxicity: None known
Reference to BimSchV: N/A
Hazard Classification: None hazardous

SECTION 13 — DISPOSAL CONSIDERATIONS

Product: Dike and collect material into plastic container. Water rinse and drain,

flush small amounts. Use sanitary landfill disposal. Follow state and local

regulations (RCRA; Subtitle D).
Hazardous Waste Number: Non Hazardous

SECTION 14 — TRANSPORT INFORMATION

This product is not classified for transport under ADR/IMDG regulations

SECTION 15 — REGULATORY INFORMATION

Physical/Chemical Indication: Non-flammable
Safety Phrase: (S2): keep away from children,
(S7): keep containers well closed,
(S24/25): avoid contact with skin and eyes,

(S62): if swallowed, do not induce vomiting; seek medical advice

immediately and show this container or label.
EU Classification: The product does not have to be classified according to the EU Regulations.
(67/548/EEC-88/379/EEC):
EINECS Status: All components are included in the EINECS inventories.
TSCA: All ingredients of this product are listed or are excluded from the listing on

the U.S. Toxic substance.
REACH: This product does not require REACH registration.

SECTION 16 — OTHER INFORMATION

HMIS RATING: Health 1, Flammability 1, Physical Hazard 0, Personal Protection B

NFPA RATING: Special Hazard 0, Health 1, Flammability 1, Reactivity 0

Disclaimer
The information given in this publication has been worked up to the best of the knowledge of Desco Industries Inc,
as well as taking into consideration the applicable laws and regulations. We cannot anticipate all conditions under
which this information and our products or the products of the manufacturers in combination with our products
may be used. We accept no responsibility for the results obtained by the application information or the safety and
suitability of our product or product combination with other products. Users are advised to make their own tests to
determine the safety and suitability of each such product or product combination for their own purposes. Unless
otherwise agreed in writing, we sell the products without warranty, and buyers end users assume responsibility and
liability for loss or damage arising from the handling and use of our products, whether used alone or in combination
with other products.

N/A = Not Applicable; NE = None Established

DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone] • Web Site: DescoIndustries.com

TB-7000 Page 5 of 5

© 2010 DESCO INDUSTRIES INC.

Employee Owned