Desco ESD User Manual

We do

Customs!

Features:

• Ideal for use by electronic manufacturers working with ESD
sensitive components

• Highly visible with yellow header and ESD Protective Symbol
allowing people to immediately know the badge holder has ESD
control properties

• .024” thick ±10% tolerance on the back and .012” thick ±10%
tolerance on the front to ensure durability and high-end
appearance

• RTT: 10E6 to 10E10 ohms per ANSI/ESD S11.11

• Tribocharging: Less than 100 volts

• Genuine Made In America – accept no substitutes

• Available in horizontal and vertical, clip or no clip

• We can do Customs just let us know your insert size!

“It should be understood that any object, item, material or person could be a
source of static electricity in the work environment. Removal of unnecessary
nonconductors, replacing nonconductive materials with dissipative or conductive
materials and grounding all conductors are the principle methods of controlling
static electricity in the workplace, regardless of the activity.” [ESD Handbook ESD
TR20.20-2008 section 2.4 Sources of Static Electricity

© 2009 DESCO INDUSTRIES INC.

Employee Owned

Made in America

07300 ESD Badge Holder, Clip-On, Vertical, 2-11/16” x 3-11/16” (OD), 2-3/8” x 3-3/8” (Insert Size)

07301 ESD Badge Holder, Clip-On, Horizontal, 3-7/8” x 2-9/16” (OD), 3-5/8” x 2-3/8” (Insert Size)

07302 ESD Badge Holder, Clip-On, Horizontal, 4-1/4” x 2-15/16” (OD), 3-7/8” x 2-5/8” (Insert Size)

07303 ESD Badge Holder, Clip-On, Horizontal, 4-5/16” x 3-3/8” (OD), 4” x 3” (Insert Size)

07304 ESD Card Holder, Proximity, Vertical, 2-11/16” x 4-3/8” (OD), 2-1/8” x 3-3/8” (Insert Size)

07305 ESD Card Holder, Proximity, Horizontal, 3-15/16“ x 3-1/16” (OD), 3-3/8” x 2-3/8” (Insert Size)

ESD Badge Holders

DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710

WEB SITE: www.Desco.com
PHONE [phone] FAX [phone]

DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE [phone] FAX [phone]

DRAWING

NUMBER:

07300

DATE:

July 2009