Denver MCA-171 Instruction Manual

INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
BETJENINGSVEJLEDNING
BRUKSANVISNING
SUOMALAISET KAYTTOOHJEET
MANUALE DI INSTRUZIONE
MANUAL DE INSTRUCÕES
MANUAL DE INSTRUCCIONES
www.denver-electronics.com
LOCATION OF CONTROLS
1. CD DOOR
2. FUNCTION SWITCH (CD/RADIO)
3. BAND SWITCH (FM/FM ST.)
4. LCD DISPLAY
5. POWER BUTTON (ON/OFF)
6. BASS BOOST BUTTON
7. STANDBY LED INDICATOR
8. TUNING KNOB
9. REMOTE SENSOR
10. CD PROGRAM BUTTON
11. CD REPEAT BUTTON
12. CD STOP BUTTON
13. CD PLAY/PAUSE BUTTON 
14. VOLUME CONTROL (UP/DOWN)
15. STEREO HEADPHONE JACK
16. CD SKIP/SEARCH FORWARD BUTTON
17. CD SKIP/SEARCH BACKWARD BUTTON
18. SPEAKER LEFT
19. SPEAKER RIGHT
20. AC POWER CORD
21. FM ANTENNA
22. SPEAKER TERMINAL (L/R)
English - 1
SPEAKER BOX CONNECTION
Connect speaker wires of SPEAKER BOXES to SPEAKER TERMINAL on the rear of unit properly. Note: Ensure polarities of speaker wire, RED (+) and BLACK (-) connected
to the SPEAKER TERMINAL properly.
AC OPERATION
Before operating, please check carefully that voltage indicated on your set corresponds to voltage of your local area.
1. Plug the AC POWER CORD into a standard AC outlet. The STANDBY LED INDICATOR will light up.
2. Press POWER BUTTON to start the unit. The LCD DISPLAY will light up while STANDBY LED INDICATOR will go “off”.
Remarks:
a. In case of malfunction due to electrostatic discharge (ESD), reset the unit
by reconnecting the AC CORD again to resume to normal operation.
b. When not in use – Unplug the AC power cord completely from the AC
power cord. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain operable.
Warning:
The power cable/disconnect device shall remain easy to operate/disconnect.
RADIO OPERATION
1. Slide FUNCTION SWITCH to “RADIO” position.
2. Slide BAND SWITCH to your desired waveband (FM or FM ST.).
3. Turn TUNING KNOB to your desired radio station; radio frequency will
appear on the LCD DISPLAY.
4. Adjust sound level by pressing VOLUME CONTROL knob (Up or Down).
5. To turn off radio, press POWER BUTTON once. The backlight of LCD DISPLAY will go “off” while STANDBY LED INDICATOR will light up.
FM STEREO INDICATOR
Slide BAND SWITCH to FM ST. position; FM stereo indicator “
” will light up when listening to a strong station that is broadcasting in “stereo”. When FM stereo reception is weak, slide BAND SWITCH to FM position. In this case FM reception will be monaural.
English - 2
Loading...
+ 6 hidden pages