Denver LED-3266T2CS, LED-4067T2CS, LED-4066T2CS, LED-4866T2CS, LED-5568T2C User Manual

LED TV with DVB-T2/S2/DVB-C

Model: LED-3266T2CS

LED-4066T2CS
LED-4067T2CS
LED-4866T2CS

User’s Guide

NOTE:

Read all of the instructions before using this TV and keep the instruction

manual in a safe place for future reference.

Contents

Select Input Source 8

First Time Installation 9-10

Main Menu Operation 11-13

1.Picture menu 14-15

OSD MENU 14-25

2.Sound menu 16

3.Time menu 17-18

4.Lock menu 19-21

5.Setup menu 22-25

Media Operation 26-30

6.Screen menu 26

1

2

3

Due to the manufacturing process of components, televisions and other electronic products
can have parts that may produce a smell after the product is first turned on and warms up.
The smell will usually dissipate within a few days of use and does not return.
This is normal and occurs with many electronic products. Please ensure there is sufficient
ventilation around the TV and in the room and the odor will dissipate.

4

Power Switch
(LED-4067T2CS/
LED-4066T2CS)

Power Switch(LED-4866T2CS)

Power Switch(LED-3266T2CS)

5

PC AUDIO

Coax:

Digital output to AV receiver.

HDMI 1

TV1(S2)

TV2(T &C)

SCARTPC AU DI OVGA

Common Interface

HDMI 2

HDMI 3

COAX

MIN I

AV

MIN I

YPb Pr

USB

TV2(T &C):

6

The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote
control may not work correctly if it is operated out of range or out of angle.

CH.LIST: Display the programs list.
EPG: To show the Electronic Program Guide during no-

menu state only in DTV mode.

FAV: Display the favorite program list.

SLEEP: StandbyTimer

PICTURE: Select the picture mode.
SOUND: Select the sound mode.

POWER(red button): Turn the TV on/standby.

MUTE: Press to mute the sound, press again or press

VOL+ to unmute.

Buttons for Basic operating

MENU: Press to display the OSD menu.

INPUT : Display the input source menu.

EXIT: Press to exit the OSD menu.

THUMBSTICK(

OK): Allows you to navigate

the on-screen menus and adjust the system settings to your
preference.

NUMBER BUTTONS: Choose channel directly. Press
number buttons and press OK button to play the channel.

: Return to the previous channel viewed.

ASPECT: Adjust picture size

SUBTITLE: Turn on/off the subtitle display in DTV mode

TV/RADIO: Switch to TV/RADIO.

DISPLAY: Press to display the current mode’s information.

ETUMREWOP

DISPLAY

MENU

TV/TXT CANCEL REVEAL NICAM/A2

INDEX HOLD SIZE SUBPAGE

EXIT

HCLOV

1 2 3 4

5 6 7 8

9 0

INPUTTV/RADIO

PICTURE SOUND ASPECT SLEEP

SUBTITLE CH.LIST EPG FAV

OK

7

ETUMREWOP

DISPLAY

MENU

TV/TXT CANCEL REVEAL NICAM/A2

INDEX HOLD SIZE SUBPAGE

EXIT

HCLOV

1 2 3 4

5 6 7 8

9 0

INPUTTV/RADIO

PICTURE SOUND ASPECT SLEEP

SUBTITLE CH.LIST EPG FAV

OK

Buttons for TELETEXT operating

You could use the buttons only in TELETEXT .

TV/TXT: Turn off/on the Teletext display.

REVEAL: Reveal any hidden text.

HOLD

: Hold or carry on the current subpage.

Colour buttons : Short cuts-follow the coloured links in the text.

INDEX: Go to index.

CH / : Channel/Program +/-.

VOL +/- : Volume +/-.

: Fast forward.

: Fast reverse.

: Previous chapter.
: Next chapter.

: Stop program.

: Play/pause program.

SIZE: Press to see top half of page double size. Press again to
see the bottom half of page double size. Press again for
normal size.

CANCEL: Cancel the Teletext display.

NICAM/A2: TV Nicam/A2 select.

SUBPAGE: Press to enter subpages, press again to cancel.

8

3

9

1.Press the menu button

2.Press button,enter “SETUP” page,choose First Time Installation by pressing button.

Press OK for Auto Tuning.

Tune Type :Select Tune Type as DTV+ATV or DTV, you can choose Air(DVB-T), Cable(DVB-C), in “Digital Type”.

Air(DVB-T) Auto Tune:

Select DTV+ATV in “Tune Type”, and DVB-T in Digital Type, then press OK to start tuning.