Denver LDD-2655DVBT Instruction Manual

26" hd ready led tv with atv and mpeg-2 dvb-t + c.i
& built-in dvd player + usb input + PVR function
Model NO.: LDD-2655DVBT
Instruction Manual
Contents
Contents
Caution Safety Information
Product Introduction
Front View Rear View
Connections
Remote Control
Basic Operation
OSD Menu
1. CHANNEL menu
2. PICTURE menu
3. SOUND menu
4. TIME menu
5. OPTION menu
6. LOCK menu
1 2
3 3
4
4 4
5
6-7
8
9-16
9-10 11 12 13 14 15-16
Hotel mode
Multimedia Operation
Recording Operation
DVD Operation 23-30
Simple Troubleshooting 31
16
17-19
20-22
Caution
Caution
The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE) Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end­of-life should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling centre. In the USA there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!
directives.
1
Safety Information
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below
Electrical safety
• The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor.
• To prevent overload, don't share the same mains supply socket with too many other items of equipment.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial (if outdoor) and mains adaptor from the supply.
- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers. There are no user serviceable parts inside. You may invalidate the warranty. Qualified personnel only are permitted to service this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
.
Physical safety
• Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2") clearance all around the unit.
• Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good care of the remote control, do not drop it or allow it to come into contact with liquids.
• To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For stubborn stains, you may use a damp soft cloth with diluted detergent.
2
Accessories & Technical Specification
Accessories
POWER MUTE
REP
EPG
REC LIST
CH/LIST
SUBTITLE
PVR/DVD
REC
INPUT
DISPLAY
OK
MENU EXIT
1234
5678
FAV
90
PICTURE
NICAM/A2
VOL CH
SOUND SLEEP
SCREEN
TV/TXT CANCEL REVEAL
D-MENU
PRO
SETUP
TITLE
HOLD SIZE SUBPAGE INDEX
SLOW
A-B
GOTO
LAN
User’s Manual Remote control
Batteries
Converter cable
AV cable
for YPBPR video
* Note: The configuration of the components may look different from the following illustration
Technical Specification
- TV System
- Screen Size
- Resolution
- Aerial input
- Audio output power
- Power Consumption
PAL BG/DK/I SECAM BG/DK/L/L’
26 inch (diagonal)
1366X768
2x8W
100-240V~ 50/60Hz 50W
Remote Control
Type
Control distance
Control angle
Batteries
infrared
5m
0
30 (horizontal)
2 x 1.5V, size
3
AAA
Product Introduction
Product Introduction
Front View
INPUT MENU CH+ CH-
INPUT:
Display the input source menu.
MENU:
Display/exit the OSD menu.
CH+/-:
VOL+
Scan through channels.
VOL+/-:
VOL- PLAY EJECT
Adjust the volume.
PLAY:
Play/pause the disc playing.
EJECT:
POWER
Eject the disc.
POWER:
Turn on/standby the TV set.
SWITCH:
Turn on/off the power supply.
LED indicator
Remote Control window(keep clear)
(IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED indicator: Press POWER to turn on and off.
Indicator on(Red) Standby mode Indicator on(Off) Power on mode
The effective receiving range for the signal is 5-8 metres from the front of the remote
0
control window, and 30
to the left or right side and 200 above or below the control
window.
Rear View
DVD
Please insert a 12cm disc according to the instruction marked below the DVD slot.
AC POWER IN
Connections
See next page
4
Connections
Connections
3
Common Interface
Headphone:Connect Headphone
CI:CI slot (pay as you view card slot)
COAX:Output to audio amplifier
RF:Connect to antenna or cable source
(AUDIO)L/R IN:Audio signal input for AV(Shared with YPbPr)
Video:Connect to the video output of external devices
YPbPr
USB
YPbPr:Connect to the YPbPr output on external devices with the converter cable.
SCART
PC audio
USB:Connect to USB device for multimedia
HDMI1/2/3: Connect to the HDMI socket of your DVD or Satellite Box
SCART:Connect to the scart input / output of external devices
PC audio: PC audio input
VGA:Connect to the PC VGA output to display PC graphics
AC POWER IN:Connect to power supply
5
Remote Control
Remote Control
The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote control may not work correctly if it is operated out of range or out of angle.
POWER MUTE
REP
SUBTITLE
PVR/DVD
DISPLAY
REC LIST
REC
INPUT
EPG
CH/LIST
OK
MENU EXIT
1234
5678
POWER: Turn the TV on/standby. MUTE: Press to mute the sound, press again or press VOL+ to unmute. REC LIST: Record List. CH/LIST: Display the programs list. SUBTITLE: Turn on/off the subtitle display in DTV mode and DVD mode. EPG: To show the Electronic Program Guide during no-menu state only in DTV mode. REP: Repeat playing the title or chapter.
: Load/eject DVD disc.
PVR/DVD REC : Press to start record the program in DVB mode.
: Stop program. : Previous chapter.
: Next chapter. : Pause program.
: Play program. : Fast reverse.
: Fast forward.
90
NICAM/A2
PICTURE
VOL CH
SOUND SLEEP
TV/TXT CANCEL REVEAL
D-MENU
SETUP
HOLD SIZE SUBPAGE INDEX
LAN
A-B
TITLE
GOTO
FAV
SCREEN
PRO
SLOW
INPUT: Press to display the input source menu. DISPLAY: Press to display the current mode’s information. MENU: System setup menu. EXIT: Exit the OSD menu. FAV: Display the favorite program list.
NUMBER BUTTONS Press0-9 to select a TV channel directly when you
are watching TV.
Return to the previous channel viewed.
CURSOR KEYS OK Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
6
Remote Control
Remote Control
POWER MUTE
REP
SUBTITLE
PVR/DVD
DISPLAY
REC LIST
REC
INPUT
EPG
CH/LIST
OK
MENU EXIT
1234
5678
90
FAV
CH / : Scan through channels. VOL / : Adjust the volume.
PICTURE: Select the picture mode. NICAM/A2: TV Nicam/A2 select. SOUND: Select the sound mode. SLEEP: Standby timer. SCREEN: Turn on/off the screen. TV/TXT: Turn off/on the Teletext display. CANCEL: Cancel the Teletext display. REVEAL: Reveal any hidden text. HOLD: Hold or carry on the current subpage. SIZE: Press to see top half of page double size, Press again to see the bottom half of page double size. Press again for normal size. SUBPAGE: Press to enter subpages, pressagain to cancel. INDEX: Go to index. Colour buttons:Short cuts-follow the coloured links in the text
PICTURE
VOL CH
TV/TXT CANCEL REVEAL
SETUP
HOLD SIZE SUBPAGE INDEX
LAN
NICAM/A2
SOUND SLEEP
D-MENU
A-B
TITLE
GOTO
SCREEN
PRO
SLOW
SETUP: DVD system setup. D-MENU: DVD play list/Disc menu. TITLE: DVD title. PRO: Edit the program and play. LAN: Select DVD disc language. A-B: Select and play the preferable paragraph of DVD program by pressing this key twice at the beginning and end of it. GOTO: Play your favorite title/chapter/track. SLOW: Play DVD programs at slow speed.
7
Basic Operation
Power on/off
1. Connect to the power supply with the power cord.
2. -To turn on the TV Press POWER button on the TV or remote control.
-To turn off the TV Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or remote control to display input source menu, and use CH+/- button on the TV set or on remote control to select the input source, press OK button on the remote control to enter.
Note: Before you select the input source, make sure the connections are prepared.
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
button
Input Source
DTV
ATV SCART YPBPR
DVD
HDMI1 HDMI2 HDMI3
USB
OK
Move
Basic Operation
PC
AV
EXIT
Select
Quit
Main menu
CHANNEL PICTURE SOUND TIME OPTION LOCK
Hint---you should operate the OSD menu according to the hint.
Use / In the submenu, use /
button to select the main menu, and press button to enter the submenu.
button to select the function item, press button to adjust/setup, or press OK button to enter the submenu. * (Press MENU button to return to the upper menu.) * (Press EXIT button to exit the menu display.)
Submenu
(Chanel menu for example)
/
Note1: Only when you input the suitable signal, the relevant items can be activated Note2: Please operating the OSD menu according to hint on the bottom of the banner.
8
Loading...
+ 24 hidden pages