Denver CRP-515 User Manual

DENVER CRP-515

FUNCTION AND CONTROLS

1. VOLUME DOWN

2. VOLUME UP/DISPLAY AUTO CHANGE ON/OFF

3. <</TUNE -/YEAR/MONTH/DAY

4. SNOOZE/SLEEP/DIMMER

5. >>/TUNE +/DST

6. MEM.SET/M+/NAP/AUTO OFF DISPLAY

7. ON/OFF RADIO/ALARM OFF

8. PM INDICATOR

9. STANDBY INDICATOR

10. ALARM 1 INDICATOR

11. DISPLAY

12. ALARM 2 INDICATOR

13. PROJECTION ON/OFF

14. PROJECTION TIME 180° FLIP

15. CLOCK ADJ

16. (AL2) ALARM 2 ON/OFF SET

17. (AL1) ALARM 1 ON/OFF SET

18. FOCUS ADJUSTMENT FOR PROJECTION UNIT

19. SPEAKER

20. AC POWER CORD

21. FM ANTENNA

22. BATTERY COMPARTMENT

23. RATING LABEL(Bottom of unit)

ENGLISH

ENG-1

TIME AND CALENDAR MANUAL SETTING
Setting Time and Calendar

Press Clock ADJ. (15) button in standby mode and keep depress
over 2 seconds to enter time set mode, after enter the setting mode,
press Clock ADJ. button (15) to change the mode cycle as follows:

Normal → Year → Month → Day → 12/24 H format → Real time
Hour → Real time Min → Normal

Action (during data adjustment):

- Press <</Tune - button (3) to adjust data backward.

- Press >>/Tune + button (5) to adjust data forward.

- Keep depressed << or >> button for 2 seconds to enable auto
forward.

- Use Clock ADJ. (15) button to conrm each setting.

ALARM SETTING
Setting Alarm 1 and Alarm 2

In standby mode, press the AL1 (17) or AL 2 (16) button once to
preview the alarm time. The alarm time is displayed, press & hold
the AL1/AL2 buttons for 3 seconds and the hours will blink. Press
AL1/AL2 button (17/16) and keep depress over 2 seconds to enter
alarm set mode. Once in the setting mode, press alarm set button
(17/16) to change the mode cycle as follows:

Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm →
AL 1 wake beep → AL 1 wake radio → AL 1 wake radio volume
→Normal.

Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm →
AL 2 wake beep → AL 2 wake radio → AL 2 wake radio volume
→Normal.

Select alarm weekday mode as follows:
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week

ENG-2

Action (during data adjustment):

- Press <</Tune - (3) button to adjust data backward.

- Press >>/Tune + (5) button to adjust data forward.

- Keep depressed << or >> button for 2 seconds to enable auto
forward.

- Use AL1/AL2 set button to conrm each setting.

ALARM

Beep alarm or radio alarm will ring for 30 minutes if no key is
pressed, then it will stop automatically and wait for same alarm time
on next day.

SNOOZE FUNCTION

- When Alarm rings, press Snooze button (4) to suspend the
alarm & to activate the snooze function, Beep or Radio alarm will
stop. 9 minutes later the alarm will ring again. Press SNOOZE
key again, alarm will be suspended again, another 9 minutes
later the alarm will ring again and so on until the next alarm
rings.
Note: The interval time of the Snooze function is 9 minutes.

- If you want to disable the SNOOZE function and stop alarm
completely, press Radio ON/OFF button (7). If you don’t press
any button, the alarm will ring during 30 minutes & stop
automatically.

- Icon of AL1 and AL2 will blink as long as Snooze function is still
operating. Once Snooze is turned off icon of AL1/AL2 stop
blinking and lights on the display.

DISPLAY LIGHT ON/OFF FUNCTION

- Press MEM. Set/M+/display light auto on-off /NAP button (6) for
3 seconds, the LED display indicator will light on, the LED
display will turn off after 15 seconds automatically.
Press any button to maintain the LED display for 15 seconds.

- Press MEM. Set/M+/display light auto on-off /NAP (6) button for
3 seconds, the LED display indicator will light off to cancel this
function.

AUTO CHANGE DISPLAY CONTENT

In radio off mode, press the VOLUME UP/DISPLAY AUTO
CHANGE ON/OFF (2) button and keep depressed over 2 seconds
to enter time auto change display mode (“ON” will appear on the
display).

ENG-3

the Year will be displayed and press again to display Month/Day, the
display returns to time display after 5 seconds, and will display again
the same info in cycle.
Press and keep depressed over 2 seconds again to turn off AUTO
CHANGE DISPLAY mode (« OFF » will appear on the display).

YEAR In dicator MONTH In dicator DAY Indicator

RADIO MODE

Note: Ensure that the FM antenna is completely unrolled and

extended to have the best FM reception.

Press the Radio ON/OFF button (7) to turn the unit on.
Use the Tune - (3) or Tune + (5) button to select the desired radio
station. If you press and hold the Tune - (3) or Tune + (5) button for
one second, then release, the unit will automatically scan to the next
broadcasting station.
Press the ON/OFF button (7) to turn the radio OFF.

To preset radio station

Press the Radio ON/OFF button (7) to turn the unit ON.
Use the Tune - (3) or Tune + (5) button to select the desired radio
station.
Press the MEM.SET/M+ (6) button; “P02” will blink in the display.
Press the ‘MEM.SET/M+’ (6) button again to set the preset.
Repeat steps 2 through 4 to set more presets.
The unit can preset 10 stations totally for FM.
When “P01-P10” blinks, press Tune - (3) or Tune + (5) button to
select the preset number.

To recall the radio preset

To recall a preset station, press MEM.SET/M+/NAP (6) button to
select the desired preset number.

SLEEP OPERATION

When you listen to the radio, press the SNOOZE/SLEEP/DIMMER
(4) button to enter into the sleep mode. You can adjust the sleep

ENG- 4

timer from 90 minutes to 15 minutes by pressing repeatedly the
SNOOZE/SLEEP/DIMMER button (4). When sleep timer is selected,
the unit will automatically turn off once time is up.

NAP FUNCTION (count down timer)

In radio off mode, press MEM.SET/M+/NAP (6) button to enter into
the NAP mode, the NAP time 90 will be displayed during 5 seconds.
In the meantime, press repeatedly MEM.SET/M+/NAP (6) button to
set the duration time from 90 min to 10 min.
Once time is up, the alarm buzzer will sound for 30 min and then
shut off automatically. To stop the alarm buzzer, press the Radio
ON/OFF button (7).
Press the MEM.SET/M+/NAP (6) button has no effect during alarm
operation.
Press Radio ON/OFF button (7) to cancel the NAP function.

DIMMER CONTROL

The dimmer switch (4) allows you to set the brightness of the LED
display to high, medium and low 3 levels.

DAYLIGHT SAVING TIME (DST) MODE

For countries with daylight saving time (DST) (one hour of difference
between summer time and winter time), this clock radio offers you
DST option to adjust summer time.
In standby mode press and hold for 2 seconds the >>/TUNE+/DST
button (5).
The clock advances by one hour. To exit DST mode, repeat the
above operation.

RESETTING

If the system does not respond or exhibits erratic or intermittent
operation, you may have experienced an electrostatic discharge
(ESD) or a power surge that triggered the internal microcontroller
to shut down automatically. If this occurs, simply disconnect the ac
power cord and remove the system backup battery, wait for at least
3 minutes and then setup the unit again as if it is a brand new unit.

ENG-5

PROJECTION UNIT

- Focus setting: Adjust the projection clock brightness/focus by
turning the brightness/focus adjustment wheel unit the projected
time is clearly shown on the ceiling or wall.

- Adjust projected direction.

- To ip projected image by 180°, press PROJECTION TIME 180°
FLIP button (14).

NOTE: PROJECTS TIME IMAGE ON THE CEILING OR WALL OF
A DARKENED ROOM.
MAXIMUN PROJECTION DISTANCE IS 3-9 FEET.

SPECIFICATIONS

Frequency range: 87.5 - 108 MHz
Battery backup: 3V (CR2032 Flat Lithium battery x 1) not included
Power supply: AC230V 50Hz

ENG- 6

WARNING

1. No naked ame sources, such as lighted candles, should be
placed on the apparatus.

2. Do not place the product in closed bookcases or racks without
proper ventilation.

3. The mains plug is used as the disconnect device, the disconnect
device shall remain readily operable.

4. The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains,
etc.

5. It shall not be exposed to dripping or splashing and that no
objects lled with liquids, such as vases, shall be placed on the
apparatus.

6. Do not connect FM antenna to outside antenna.

7. The unit should not be exposed to direct sunlight, very high or
low temperature, moisture, vibrations or placed in dusty
environment.

8. Do not use abrasive, benzene, thinner or other solvents to clean
the surface of the unit. To clean, wipe it will mild non-abrasive
detergent solution and clean soft cloth.

9. Never attempt to insert wires, pins or other such objects into the
vents or opening of the unit.

10. Batteries shall not be exposed to excessive heat such as
sunshine, re or the like.

11. Attention should be drawn to the environmental aspects of
battery disposal.

12. Do not dispose this product into usual household garbage at the
end of its lifecycle; hand it over to a collection center for
recycling the electrical and electronic appliances. By recycling,
some of the materials can be reused. You are making an
important contribution to protect our environment. Please inquire
your community administration for the authorized disposal
center.

ENG-7

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A /S

www.denver-electrionics.com

Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to
your health and the environment, if the waste material (discarded
electric and electronic equipment and batteries) is not handled
correctly.

Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen below. This symbol signies
that electric and electronic equipment and batteries should not be
disposed of with other household waste, but should be disposed of
separately.

As the end user it is important that you submit your used batteries to
the approriate and designated facility. In this manner you make sure
that the batteries are recycled in accordance with legislature and
will not harm the environment.

All cities have established collection points, where electric and
electronic equipment and batteries can either be submitted free
of charge at recycling stations and other collection sites, or be
collected from the households. Additional information is available at
the technical department of your city.

Imported by:
DENVER ELECTRONICS A /S
Stavneagervej 22
DK-8250 Egaa
Denmark
www.facebook.com/denverelectronics

ENG- 8