Denver CAU-410 Instruction Manual

INSTRUCTION MANUAL

CAR STEREO MP3/WMA PLAYER

WITH PLL FM STEREO RADIO

RDS

USB / SD/MMC / FRONT AUX INPUT

FLIP DOWN/DETACHABLE FRONT PANEL

CAU-410

DISP

E1

LOCATION OF PARTS AND CONTROLS

1. POWER ON/OFF ( )

2. FUNCTION SELECT BUTTON: CONTROLS FOR BASS/TREBLE/BALANCE/FADER /
INITIAL VOLUME / CT / TA VOL / EON / DSP

3. VOL UP/VOL DOWN BUTTON: CONTROLS FOR BASS/TREBLE/BALANCE/FADER /
INITIAL VOLUME / CT / TA VOL / EON /DSP

4. PRESET STATIONS (1,2,3,4,5,6)

5. ‘AF’ function (ALTERNATIVE FREQUENCIES)

6. ‘TA’ function (TRAFFIC ANNOUNCEMENT)

7. ‘PTY’ function (PROGRAM TYPE)

8. DISPLAY BUTTON (DISP)

9. MODE/LOUDNESS BUTTON (LD/MOD)

10. BAND/ENTER BUTTON (BD/ENT)

11. AUTOMATIC OR MANUAL TUNING

(FREQ UP OR FREQ DOWN )/ TRACK/SEARCH BUTTON

12. AUTO SEEK SEARCH TUNING (A/PS)

13. ‘SCAN’ AUTOMATIC TUNING CONTROL (SCN)

14. MUTE BUTTON (MUTE)

15. LCD DISPLAY

16. OPEN PANEL BUTTON ( )

17. PAUSE BUTTON

18. REPEAT BUTTON

19. INTRO BUTTON (Preview all Tracks)

20. RANDOM BUTTON

21, 22. FOLDER DOWN/UP (MP3/WMA Files only)

23. USB PORT

24. MULTI-MEDIA CARD (MMC) / SD CARD SLOT

25. AUX IN

26. RESET BUTTON

27. POWER INDICATOR LED

DISP

DISP

1 15 7 5 16 2411 910 2 3

14 17 18 19 20 21 22 6 2312 25813

(1-6)

4

DISP

26 27

RESET

DISP

(1-6)

4

E2

2

182mm

53mm

3

4

TAP

1

1

2

INSTALLATION

PRECAUTIONS

• Choose the mounting location carefully so that the unit will not interfere with the normal
driving functions of the driver.

• Avoid installing the unit where it would be subject to high temperatures, such as from direct
sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive
vibration.

• Use only the supplied mounting hardware for a safe and secure installation.

• Be sure to remove the front panel before installing the unit.

NOTE : Inclination angle for car radio installation must not

exceed 30˚ otherwise the front panel will not open.

Note: Keep the release key in the safe place as you may need it in future to remove the unit

from the car.

Bend these
claws, if necessay

WIRE CONNECTION

RCA Jack Line Out:
Red (right) White (left)

CONNECTOR A

1.

2.

3.

4. MEMORY +12V

5. AUTO ANTENNA OUTPUT

6.

7. +12V (TO IGNITION KEY)

8. GROUND

Note: (connector A no. 7) must be connected by car ignition key in order to avoid that car
battery becomes weak when the car will be not used for long period.

CONNECTOR B

1. REAR RIGHT SPEAKER (+)

2. REAR RIGHT SPEAKER (-)

3. FRONT RIGHT SPEAKER (+)

4. FRONT RIGHT SPEAKER (-)

5. FRONT LEFT SPEAKER (+)

6. FRONT LEFT SPEAKER (-)

7. REAR LEFT SPEAKER (+)

8. REAR LEFT SPEAKER (-)

Maintenance

FUSE REPLACEMENT

If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the
replacement, there may be an internal malfunction. In this case, consult your nearest repairing center.

Warning

Use the specied amperage fuse for each lead. Use of a higher amperage fuse may cause serious dam­age.

L (WHITE)

LINE OUT

R (RED)

ANTENNA

CONNECTOR

ISO CONNECTOR

B

A

1 3 5 7

2 4 6 8

5 7

4 8