FT0052D
User manual
(1/6)
Model name
Model No
Index
1-Rating
2-Button function spec
3-Bluetooth Device Pairing Procedure
4-System spec
COMB PLAYER A
FT0052D
Page
2P
3～4P
5P
6P
1-Rating
(2/6)
RATED VOLTAGE
LOAD IMPEDANCE
BACK UP CURRENT
RATED CURRENT
AM TUNING RANGE
FM TUNING RANGE
CD TYPE
12.0V(10.5～16.0V)-GROUND
4Ω
0.3mA OR LESS
2.3A OR LESS (Vcc=14.4V 0.5W OUTPUT)
522～1611kHz
87.5～108MHz
12cm DISC
2-Button function spec
＜２W4MU/CD/USB-Y ＞
⑤
⑥
⑦
⑧
⑨
(3/6)
⑩
⑬
⑭
③
Button No. Button Name Operation Function
SEEK TRACK
①
DOWN
(＜)
④
Push
Below 0.8sec
Push
Over 0.8sec
(Radio) SEEK DOWN
(CD,USB) Track DOWN
(CD,USB) Fast DOWN
①
⑪
⑫
②
②
③
④
SEEK TRACK
UP
(＞)
OFF HOOK
ON HOOK
Push
Below 0.8sec
Push
Over 0.8sec
Push
Push
(Radio) SEEK UP
(CD,USB) Track UP
(CD,USB) Fast UP
Dial Menu Operation
Receiving a Call
Dial Menu Operation
Disconnecting a Call
Button No. Button Name Operation Function
(4/6)
Push
Below 1.7sec
⑤～⑩ Preset 1～6
Push
Over 1.7sec
Push once 1Track Repeat
⑨Preset 5
Push twice 1Folder Repeat
Push once 1Folder Random
⑩Preset 6
Push BROWSE, BACK
⑬ Push Disc eject
⑪ MODE Push
Push PWR Switch
⑭ PWR･VOL
Turn Volume Control
Push ENTER
TUNE･
⑫
CONTROL
ENTER LIST
Turn
(Radio) Call Preset CH
(Radio) Insert Preset CH
Switching over to
AM/FM/CD/USB/AUX/BT-Audio
(Radio) TUNE
(CD,USB) Track change
(Audio control, BROWSE) Scroll
3.Bluetooth Device Pairing Procedure
1. Press SETUP･ENTER knob to display the " SETUP " mode.
2. Turn TUNE･SELECT knob to select “ Bluetooth ”, and then press SETUP･ENTER knob.
3. Turn TUNE･SELECT knob to select " Pairing ", and then press SETUP･ENTER knob.
・ The passkey appears.
4. Operate the Bluetooth device to register.
For Bluetooth devices not supporting Secure Simple Pairing (SSP):
Enter the passkey into the Bluetooth device.
For Bluetooth devices supporting Secure Simple Pairing (SSP):
Select "Yes" to register the Bluetooth device.
・ Depending on the Bluetooth device type, registration may perform automatically.
(5/6)
4-System spec
MAIN
(6/6)
SP OUT（FL, FR, RL, RR）
H/U（D4）
STSW
制御信号
Control signal
BT-MIC
FCC ID: BABFT0052D
CAUTION: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy that it deemed to
comply without maximum permissive exposure evaluation (MPE). But it is desirable
that it should be installed and operated with at least 20cm and more between the
radiator and person's body in normal use position.
Co-location: This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Loading...