DENSO TEN FT0032A User Manual

79
1. SETUP OPERATION
5
SETUP
4. Bluetooth® SETTINGS
2 Touch “Bluetooth*”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3 Touch the items to be set.
Please refer to the following pages for
each setting.
1 Press the “SETUP” button.
2 Touch “Bluetooth*” on the “Setup”
screen.
*: Bluetooth is a registered trademark of
Bl
uetooth SIG, Inc.
3 Touch “Registered devices”.
4 This screen is displayed.
1 Touch “Add new” to register your
Bluetooth
®
device to the system.
You can confirm and change the
Bluetooth® settings.
REGISTERED DEVICES
ADDING A NEW DEVICE
80
1. SETUP OPERATION
2 When this screen is displayed, perform
a device discovery from your Bluetooth device.
3 Input the passcode displayed on the
screen into your Bluetooth device.
Passcodes are not required for SSP
(Secure Simple Pairing) compatible Bluetooth devices.
I
f you want to cancel it, touch “Cancel”.
If
the Bluetooth® phone to be registered
has a Bluetooth® audio function, this can be registered at the same time.
4 When the connection is completed,
this screen is displayed.
Once you have registered it, the system
automatically connects to your Bluetooth
®
device every time you start your vehicle.
1 Touch “Remove” to remove your
Bluetooth® device from the system.
2 Select the device to remove.
INFORMATION
For details on device discovery for your
Bluetooth phone, refer to the Bluetooth phone’s user’s guide.
When you register your phone,
Bluetooth
®
audio will disconnect.
If the Bluetooth
®
device has Bluetooth
®
phone and Bluetooth® audio functions, it will register phone and audio simulta­neously. If an on-screen message appears, follow the message and regis­ter either or both Bluetooth
®
phone and/
or Bluetooth
®
audio functions.
REMOVING A Bluetooth® DEVICE
INFORMATION
When you delete a Bluetooth® phone,
the phonebook data will be deleted at the same time.
81
1. SETUP OPERATION
5
SETUP
1 Touch “Details” to display a device
detail.
2 Select the device to display.
3 This screen is displayed.
Touch or to scroll the list. Th
e information displays the following
items.
CHANGING THE CONNECTION
METHOD
1 Touch “Connection method” and se-
lect
From vehicle” or “From audio
player”.
DISPLAYING DEVICE DETAILS Name Function
“Device name”
The name in the Bluetooth
®
network.
“Device
address”
The address peculiar to the system. You cannot change it. If the same device name is dis­played on the screen of your device, refer to it.
“My telephone
number”
Telephone number of your phone. The number may not be displayed de­pending on the phones.
“Profiles”
The profiles which sup­port your Bluetooth
®
de­vice. (For details of each profile, see pages XX and XX.)
“Connection
method”
The connection method can be switched be­tween “From vehicle” and “From audio play- er”.
The connection method can be select­ed.
82
1. SETUP OPERATION
2 Touch “OK”.
“From vehicle”: Connect the audio sys-
tem to the portable audio player. “From audio player”: Connect the porta-
ble audio player to the audio system.
INITIALIZING THE Bluetooth
®
SETTINGS
1 Touch “Default”.
1 Press the “SETUP” button.
2 Touch “Bluetooth*” on the “Setup”
screen.
*: Bluetooth is a registered trademark of
Bl
uetooth SIG, Inc.
3 Touch “Connect telephone”.
4 Select the device to connect.
The Bluetooth® mark is displayed when
you connect the device.
When you touch the device name with the
selection indicator and the Bluetooth
®
mark, the device will be disconnected.
5 When the connection is completed,
this screen is displayed.
1 Press the “SETUP” button.
You can initialize the settings.
CONNECT TELEPHONE
In case you register more than one
Bluetooth® device, you need to choose a favorite one.
You can select the Bluetooth
®
device
from a maximum of 5 numbers.
CONNECT AUDIO PLAYER
In case you register more than one
Bluetooth® device, you need to choose a favorite one.
You can select the Bluetooth
®
device
from a maximum of 5 numbers.
83
1. SETUP OPERATION
5
SETUP
2 Touch “Bluetooth*” on the “Setup”
screen.
*: Bluetooth is a registered trademark of
Bl
uetooth SIG, Inc.
3 Touch “Connect audio player”.
4 Select the device to connect.
The Bluetooth® mark is displayed when
you connect the device.
When you touch the device name with the
selection indicator and the Bluetooth
®
mark, the device will be disconnected.
5 When the connection is completed,
this screen is displayed.
1 Press the “SETUP” button.
2 Touch “Bluetooth*” on the “Setup”
screen.
3 Touch “Detailed Bluetooth*
settings”.
*: Bluetooth is a registered trademark of
Bl
uetooth SIG, Inc.
4 This screen is displayed.
Touch or to scroll the list.
DETAILED Bluetooth® SETTINGS
84
1. SETUP OPERATION
The information displays the following
items.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
1 Touch “Bluetooth* power”.
2 Touch “On” or “Off”.
3 Touch “OK”.
In case that the state of “Bluetooth*
power” is changed from “Off” into “On”,
Bluetooth
®
connection will begin.
The
“Bluetooth* power” display shows
the following state.
When “Bluetooth* power” is “On”: The Bluetooth
®
device is automatically con-
nected when you start your vehicle. When
“Bluetooth* power” is “Off”: The
Bluetooth® device is disconnected, and the system will not connect to it next time.
You can select the state of “Bluetooth*
power”.
On: The automatic connection is turned
on. Off: The automatic connection is turned
off. *: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Name Function
“Bluetooth*
power”
It is available to set wheth­er registered devices will be connected automatical­ly or not.
“Device
name”
The name in the Bluetooth
®
network. You
cannot change it.
“Passcode”
The password when you register your Bluetooth de­vice in the system. You can change it.
“Device
address”
The address peculiar to the system. You can not change it.
“Profiles”
The name of the profile which your Bluetooth
®
de­vice corresponds to. (For details of each profile, see pages XX and XX.)
“Display tele-
phone status”
The Bluetooth® phone connection status. You can turn it on and off.
“Display
audio player
status”
The portable audio player connection status. You can turn it on and off.
If you want to change the settings, refer
to the following pages.
When you change the settings, touch
“OK” after changing them.
CHANGING THE Bluetooth® POWER
85
1. SETUP OPERATION
5
SETUP
1 Touch “Passcode”.
2 Input a passcode and touch “OK”.
1 Touch “Display telephone status”.
2 Touch “On” or “Off”.
3 Touch “OK”.
When you start your vehicle and the
Bluetooth® phone is automatically connected, the connection check is displayed.
Y
ou can select the state of “Display tele-
phone status”.
On: The status is displayed. Off: The status is not displayed.
1 Touch “Display audio player status”.
2 Touch “On” or “Off”.
3 Touch “OK”.
EDITING THE PASSCODE
CHANGING THE DISPLAY PHONE STATUS
CHANGING THE DISPLAY AUDIO PLAYER STATUS
86
1. SETUP OPERATION
When you start your vehicle and the
Bluetooth® portable audio player is automatically connected, the connection check is displayed.
Y
ou can select the state of “Display
audio player status”.
On: The status is displayed. Off: The status is not displayed.
1 Touch “Default”.
If the state of “Bluetooth* power” is
changed from “Off” into “On”, Bluetooth
®
connection will begin.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
INITIALIZING THE Bluetooth® SETTINGS
You can initialize the settings.
FCC ID: BABFT0032
A
A
IC : 2024B-FT0032
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including    interference that may cause undesired operation.
L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
CAUTION
Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person's body
(excluding extremities: hands, wrists, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
FUJITSU TEN CONFIDENTIAL
Loading...