HANDS-FREE OPERATION
② ON
HOOK
BUTTON
①VOLUME
KNOB
③ OFF
HOOK
BUTTON
④ DISPLAY WINDOW
⑧ FUNCTION
BUTTONS
⑨ SET UP
BUTTON
⑦ SEEK/TRACK
BUTTONS
⑤ TUNE•
FILE
KNOB
⑥ ENTER・LIST
BUTTON
ATTENTION
• Do not leave your cellular phone in the car. The temperature inside may
be high and damage the phone.
• When you dispose of your car, take care to delete all personal data that
are registered in your TOYOTA AUDIO system. You should delete
the following Hands-free data from the system;
• Bluetooth phone data
NOTE
In the following conditions, the system may not function.
• The cellular phone is turned off.
• The current position is outside the communication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
HANDS-FREE SYSTEM
• The Bluetooth®word mark and logos are owned by the Bluetooth
Hands-free system allows you to make or receive a call without taking
your hands off the steering wheel by connecting your cellular phone.
This system supports Bluetooth, a wireless radio data
transferring system, by which you can make calls without your cellular
phone being connected with a cable or placed on cable.
If your cellular phone does not support Bluetooth, this system
can not function.
!
CAUTION
While driving, do not use a cellular phone or connect a Bluetooth phone.
SIG, Inc. and use of such marks by TOYOTA MOTORS LIMITED is
under license. Other trade marks and trade names are those of their
respective owners.
• Compatible Bluetooth Specifications: Bluetooth Specification Ver. 1.2
or later
• Compatible Profiles: HFP Ver. 1.5 or later
OPP Ver. 1.1 or later
FUJITSU TEN CONFIDENTIAL
ABOUT THE DISPLAY
Reception Level Indication (6) Press the "BACK" FUNCTION BUTTON ⑧ twice to go back
The strength of the reception is indicated in the DISPLAY WINDOW ④ to the previous mode.
Indication
(5) When Antenna mark is displayed at the right top of the screen,
the connection is completed.
BACK
ATTENTION
Level
Bluetooth connection status
When a Bluetooth connection is established, " " is shown in the
DISPLAY WINDOW ④
REGISTERING A BLUETOOTH CELLULAR PHONE
StrongWeak
You cannot register the Bluetooth cellular phone while driving. Park your
vehicle in a secure location and select the cellular phone.
BT
NOTE
If "Failed" is displayed in the DISPLAY WINDOW ④ after entering the
pass key, repeat the registration operation.
Registration is required in order to use a Bluetooth system..
For details of the operation to be performed at the cellular phone,
refer to the instruction manual supplied with the phone. (1) Press the SET UP BUTTON ⑨ to display the phone menu.
REGISTERING BLUETOOTH CELLULAR PHONE FOR THE FIRST TIME
(NO PHONES CURRENTLY REGISTERED)
(1) Press the SET UP BUTTON ⑨ to display the phone menu. and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu.
(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤, and press (4) Change the pass key numbers digit by digit by turning the
ENTER・LIST BUTTON ⑥ to display SETUP menu. TUNE・FILE KNOB ⑤ .The Number can be comprised of from
(3) Select "BT Pairing" by turning the TUNE・FILE KNOB ⑤, and press 4 to 8 digits. Press "ENTER" FUNCTION BUTTON ⑧ to complete
ENTER・LIST BUTTON ⑥ to display Bluetooth menu. changing the pass key.
will be shown. Perform an initial registra t ion on a Bluet oot h to the previous mode.
supported cellular phone.
（Refer to the instruction manual supplied with the cellular phone.）
• The connection method from the telephone set to the unit varies according
to the specification of your cellular phone. Refer to the instruction manual
supplied with the phone.
Bluetooth
BT Pairing
(4) After "CAR AUDIO Passkey0000" is displayed, " SEARCHI NG " (5) Press the "BACK" FUNCTION BUTTON ⑧ twice to go back
CHANGING THE PASS KEY
(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤,
and press ENTER・LIST BUTTON ⑥ to display SETUP menu.
(3) Select "Set Passcode" by turning the TUNE・FILE KNOB ⑤,
Bluetooth
Set Passcode
BACK
ATTENTION
You cannot change the pass key while driving. Park your vehicle in a secure
location and change the pass key.
FUJITSU TEN CONFIDENTIAL
DELETING A REGISTERED CELLULAR PHONE
(3) Select "Enter Phone number" by turning the TUNE・FILE
(1) Press the SET UP BUTTON ⑨ to display the phone menu. BUTTON ⑤, and press ENTER・LIST BUTTON ⑥ to display
(2) Select "Bluetooth" by turning the TUNE・FILE KNOB ⑤, and press PHONE menu.
Bluetooth
ENTER・LIST BUTTON ⑥ to display SETUP menu. (4) Turn the TUNE・FILE BUTTON ⑤ and "ENTER" FUNCTION
(3) Select "List Phone" by turning the TUNE・FILE KNOB ⑤, and press BUTTON ⑧ to enter the phone number digit by digit.
List Phone
ENTER・LIST BUTTON ⑥ to display Bluetooth menu. (5) Press OFF HOOK BUTTON ③ to make a call.
(4) Select "CELL" to display the cellular phone information
that is currently paired with the AUDIO unit by turning the
CELL
MAKING A PHONE CALL FROM A REGISTERED NUMBER
TUNE・FILE KNOB ⑤. Select a desired cellular phone to be deleted.
(5) Turn the TUNE・FILE BUTTON ⑤ and select "Delete" to delete (1) Press the SET UP BUTTON ⑨ to display the phone menu.
Delete
the currently paired cellular phone. (2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning
Delete a CELL ?
(6) "Delete a CELL ?" will appear in the DISLAY WINDOW ④ asking for the TUNE・FILE BUTTON ⑤ to display SETUP menu.
confirmation, then press "YES" in the FUNCTION BUTTON ⑧. (3) Select "PHONE book" and press ENTER・LIST BUTTON ⑥
(7) Press the "BACK" FUNCTION BUTTON ⑧ three times to by turning the TUNE・FILE BUTTON ⑤ to display PHONE menu.
BACK
YES
go back to the previous mode. (4) Turn the TUNE・FILE BUTTON ⑤ and select a phone number to call
(5) Press OFF HOOK BUTTON ③ to make a call.
Enter Phone number
ENTER
PHONE
PHONE book
ATTENTION
You cannot delete the registered telephone set while driving. Park your
vehicle in a secure location and delete the registered cellular phone.
Phone number is not displayed while driving. Only when the vehicle is
stopped or parked, it is displayed.
ATTENTION
MAKING A PHONE CALL
You can make a phone call using the phone book of the AUDIO unit,
manually dialing from the AUDIO unit or direct from your cellular phone.
(1) Press the OFF HOOK BUTTON ③ to display the phone menu.
(2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning the
PHONE
TUNE・FILE BUTTON ⑤ to display SETUP menu.
FUJITSU TEN CONFIDENTIAL
ANSWERING A PHONE CALL
(4) Select "Add contact" by turning the TUNE・FILE BUTTON ⑤,
When your telephone set receives a call, the name or telephone and press ENTER・LIST BUTTON ⑥ to display PHONE book menu
number appears in the DISPLAY WINDOW ④ (5) Select "Add one contact" by turning the TUNE・FILE BUTTON ⑤,
• If the incoming telephone number is not registered, the telephone
number is displayed in the DISPLAY WINDOW ④.
If the incoming telephone name and number are registered, the name
is displayed in the DISPLAY WiNDOW ④.
If only the incoming telephone number is registered, the telephone
number is displayed in the DISPLAY WINDOW ④.
and press ENTER・LIST BUTTON ⑥ to display Add
one contact menu.
(6) "REST of memory is 1000, OK ?" will appear in the
DISLAY WINDOW ④ asking for confirmation, then press "YES"
in the FUNCTION BUTTON ⑧.
(7) Transfer a desired phone number to be added from a currently
paired cellular phone to the AUDIO unit.
(1) Press the OFF HOOK BUTTON ③ to talk using the hands-free system. (By manipulating a cellular phone, select Bluetooth transmission
(2) Press ON HOOK BUTTON ② to hang up the phone. > select the audio player > select OK .)
(8) Press the "BACK" FUNCTION BUTTON ⑧ four times to go
back to the previous mode.
Add contact
Add one contact
REST of memory is 1000, OK ?
BACK
REFUSING AN INCOMING CALL
・ Press ON HOOK BUTTON ② while the phone is ringing.
ATTENTION
You cannot register any information in the phone book while driving.
REGISTERING INFORMATION IN THE PHONE BOOK
Telephone numbers and names can also be registered manually
in the phone book. Up to 100 entries can be registered in the
phone book of the main device.
REGISTERING THE PHONE BOOK DATA OF A MOBILE PHONE IN
THE PHONE BOOK OF THE MAIN DEVICE
To register the phone book data of a mobile phone registered in (1) Press the SET UP BUTTON ⑨ to display the phone menu.
the main device. (2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤, and
(1) Press the SET UP BUTTON ⑨ to display the phone menu. press ENTER・LIST BUTTON ⑥ to display SETUP menu.
(2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤, and press (3) Select "PHONE book" by turning the TUNE・FILE BUTTON ⑤,
PHONE
ENTER・LIST BUTTON ⑥ to display SETUP menu. and press ENTER・LIST BUTTON ⑥ to display PHONE menu.
(3) Select "PHONE book" by turning the TUNE・FILE BUTTON ⑤,
PHONE book
and press ENTER・LIST BUTTON ⑥ to display PHONE menu.
FUJITSU TEN CONFIDENTIAL
Park your vehicle in secure location and then register the information.
DELETING THE DATA IN THE PHONE BOOK
PHONE
PHONE book
(4) Select "Delete history" by turning the TUNE・FILE BUTTON ⑤,
Delete history
SETTING THE VOLUME OF THE RING TONE
and press ENTER・LIST BUTTON ⑥ to display PHONE book menu. (1) Press the SET UP BUTTON ⑨ to display the phone menu.
(5) Select "All Calls" by turning the TUNE・FILE BUTTON ⑤, (2) Select "PHONE" by turning the TUNE・FILE BUTTON ⑤,
All Calls
PHONE
and press ENTER・LIST BUTTON ⑥ to display Delete history menu. and press ENTER・LIST BUTTON ⑥ to display SETUP menu.
(6) Select a registered number to delete by turning the (3) Select "HF Soundsetting" by turning the TUNE・FILE BUTTON ⑤,
HF Soundsetting
TUNE・FILE BUTTON ⑤, and press ENTER・LIST BUTTON ⑥. and press ENTER・LIST BUTTON ⑥ to display Bluetooth menu.
(7) "Delete from All Calls?" will appear in the DISLAY WINDOW ④ (4) Select "Ringtone Volume" by turning the TUNE・FILE BUTTON ⑤,
asking for confirmation, then press "YES" in the and press ENTER・LIST BUTTON ⑥ to display
Delete from All Calls ?
YES
Ringtone Volume
FUNCTION BUTTON ⑧. HF Soundsetting menu.
(8) Press the "BACK" FUNCTION BUTTON ⑧ twice to go back (5) Turn the TUNE・FILE BUTTON ⑤ to change the volume.
to the previous mode. (6) Press "SAVE" in the FUNCTION BUTTON ⑧ to complete
BACK
SAVE
the setting.
(7) Press the "BACK" FUNCTION BUTTON ⑧ three times to
BACK
go back to the previous mode.
ATTENTION
You cannot delete the phone book data while driving. Park your vehicle
in a secure location and then delete the data.
SETTING THE VOLUME
The volume and microphone gain setting for each cellular phone is different
according to its specification.
Please adjust the volume by turning the VOLUME KNOB ①.
NOTE
SETTING THE SPEECH VOLUME
(1) Press the SET UP BUTTON ⑨ to display the phone menu.
(2) Select "PHONE" and press ENTER・LIST BUTTON ⑥ by turning the
PHONE
CHANGING THE TRANSMITTING VOLUME
TUNE・FILE BUTTON ⑤, to display SETUP menu. ・ During phone conversation press SEEK・TRACK BUTTON
(3) Select "HF Soundsetting" and press ENTER・LIST BUTTON ⑥ ∧(UP) or ∨(DOWN) for volume adjustment.
HF Soundsetting
by turning the TUNE・FILE BUTTON ⑤, to display Bluetooth menu.
(4) Select "all Volume" by turning the TUNE・FILE BUTTON ⑤,
all Volume
and press ENTER・LIST BUTTON ⑥ to display HF Soundsetting menu.
(5) Turn the TUNE・FILE BUTTON ⑤ to change the volume.
(6) Press "SAVE" in the FUNCTION BUTTON ⑧ to complete the setting.
(7) Press the "BACK" FUNCTION BUTTON ⑧ three times to go back
SAVE
BACK
to the previous mode.
FUJITSU TEN CONFIDENTIAL
FCC ID: BABFT0023
A
A
IC : 2024B-FT0023
Changes or modifications not expressly approved by the party
This device complies with part 15 of the FCC Rules. responsible for compliance could void the user's
Operation is subject to the following two conditions: authority to operate the equipment.
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Radio Frequency Radiation Exposure
L'utilisation de ce dispositif est autorisée seulement aux deux conditions This equipment complies with FCC radiation exposure limits set
suivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du forth for uncontrolled equipment and meets the FCC radio
dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, frequency (RF) Exposure Guidelines in Supplement C to OET65.
même si ce brouillage est susceptible de compromettre le fonctionnement This equipment has very low levels of RF energy that it
du dispositif. deemed to comply without maximum permissive
exposure evaluation (MPE).
But it is desirable that it should be installed and
operated with at least 20cm
and more between the radiator and person's body
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
WARNING
CAUTION
(excluding extremities: hands, writsts, feet and ankles).
FUJITSU TEN CONFIDENTIAL
Loading...