HANDS-FREE SYSTEM
• The Bluetooth
word mark and logos are owned by the Bluetooth
CAUTION
HANDS-FREE OPERATION
③ DISPLAY WINDOW
ATTENTION
• Do not leave your mobile phone in the car. The temperature inside may
be high and damage the phone.
• When you dispose of your car, take care to delete all personal data that
are registered in your ISUZU D-MAX AUDIO system. You should delete
the following Hands-free data from the system;
• Bluetooth phone data
④ TUNE•
FILE
KNOB
⑤ AUDIO
BUTTON
⑥ MENU
BUTTON
⑦ FUNCTION
① VOLUME
ADJUST
KNOB
② PHONE
BUTTON
Hands-free system allows you to make or receive a call without taking
your hands off the steering wheel by connecting your mobile phone.
This system supports Bluetooth. Bluetooth is a wireless radio data
transferring system by which you can make calls without your mobile
phone being connected with a cable or placed on cable.
If your mobile phone does not support Bluetooth, this system
can not function.
!!!!
While driving, do not use a mobile phone or connect the bluetooth phone.
NOTE
In the following conditions, the system may not function.
• The mobile phone is turned off.
• The current position is outside the communication area.
• The mobile phone is not connected.
• The mobile phone has a low battery.
®
SIG, Inc. and use of such marks by ISUZU MOTORS LIMITED is
under license. Other trade marks and trade names are those of their
respective owners.
• Compatible Bluetooth Specifications: Bluetooth Specification Ver. 1.2
or later
• Compatible Profiles: HFP Ver. 1.5 or later
OPP Ver. 1.1 or later
FUJITSU TEN CONFIDENTIAL
ABOUT THE DISPLAY
• The telephone set will be registered in the main unit automatically. When
REGISTERING A BLUETOOTH TELEPHONE SET
CHANGING THE PASS KEY
registration is completed, the message "Completed!" appear for a few seconds
Reception Level Indication
and " " is shown in the DISPLAY WINDOW ③ in that order.
The strength of the reception is indicated in the DISPLAY WINDOW ③ (5) Press the PHONE button ② to go back to the previous mode.
Indication
ATTENTION
Level
Bluetooth connection status
When a Bluetooth connection is established, " " is shown in the
DISPLAY WINDOW ③
Registration is required in order to use a Bluetooth telephone set.
For details of the operation to be performed at the telephone set,
refer to the instruction manual supplied with the telephone set. (1) Press the PHONE BUTTON ② to display the phone menu.
REGISTERING BLUETOOTH TELEPHONE SET FOR THE FIRST TIME
(NO PHONES CURRENTLY REGISTERED)
(1) Press the PHONE BUTTON ② to display the phone menu. Bluetooth information of the main unit.
(2) Press MENU BUTTON ⑥, then press in the FUNCTION (4) Press in the FUNCTION BUTTON ⑦ to change the pass key.
BUTTON ⑦ to display Bluetooth menu. (5) Turn the TUNE•FILE KNOB ④ to display the numeral of your
(3) Press in the FUNCTION BUTTON ⑦ so that the main choice in the DISPLAY WINDOW ③, then press the AUDIO
PAIR
unit will start searching for other Bluetooth devices. BUTTON ⑤.
(4) When "Connecting...", "Device Name: D-MAX" and
"Passkey: ____" is displayed in the DISPLAY WINDOW ③; (6) After entering the final number of your choice, press in the
use the mobile phone to pair with the main unit FUNCTION BUTTON ⑦ to save the pass key you have entered.
and to enter the pass key.
• The connection method from the telephone set to the unit varies according • If you wish to change the pass key again, press and then press
to the specification of your telephone set. Refer to the instruction manual in the FUNCTION BUTTON ⑦.
supplied with the telephone set
StrongWeak
You cannot register the Bluetooth telephone set while driving. Park your
vehicle in a secure location and select the telephone set.
NOTE
If "Failed" is displayed in the DISPLAY WINDOW ③ after entering the
pass key, repeat the registration operation.
BT
SAVE
INFO EDIT
BT
(2) Press MENU BUTTON ⑥, then press in the FUNCTION
BUTTON ⑦ to display Bluetooth menu.
(3) Press in the FUNCTION BUTTON ⑦ to display the
INFO
EDIT
• Repeat the same operation until you have entered the entire pass key.
• The pass key number comprises of only 4 digits.
(5) Press the PHONE button ② to go back to the previous mode.
FUJITSU TEN CONFIDENTIAL
Loading...