temp 2.fm 2 ページ ２００８年１２月１８日 木曜日 午前１１時５５分
1. Bluetooth hands-free Operation
Using the Bluetooth hands-free function
The use of Bluetooth wireless communication technology enables a Bluetooth-compatible cell phone
to be used with the main unit. Once the cell phone is connected to the main unit, it is possible to
make calls without directly operating the cell phone. Before using a Bluetooth-compatible cell phone
with the main unit, please be sure to perform the Bluetooth registration and connection setting
procedures.
• Bluetooth is a form of short-range wireless technology used to connect cell phones and personal
computers, etc.
• For safety reasons, be sure to stop the vehicle before performing operations such as cell phone
registration or making calls.
Registering a cell phone
Cell phones can be registered in the main unit.
aPress [ ].
b
■ Searching for the cell phone to be
registered using the main unit
c
● “Searching” will appear on the display.
dSelect the device name of the cell phone to
be registered.
Registering using a cell phone
■
c
Use the cell phone to input the PIN CODE.
d
● The default PIN CODE is 1234.
● Operate the cell phone only while the device
information screen is displayed.
eWhen the registration has been completed,
"Completed" will appear on the display.
● The cell phone is now registered.
eUse the cell phone to input the PIN CODE.
● The default PIN CODE is 1234.
● Operate the cell phone only while the device
information screen is displayed.
fWhen the registration has been completed,
"Completed" will appear on the display.
● The cell phone is now registered.
ATTENTION
If registration is not successful, "FAILED" will appear
on the display. When this happens, perform the
registration procedure again.
2
temp 2.fm 3 ページ ２００８年１２月１８日 木曜日 午前１１時５５分
Connecting a cell phone
Cell phones registered in the main unit can be
connected.
a
Select the cell phone to be connected and
b
then touch [Connect].
cWhen the connection has been completed,
"Completed" will appear on the display.
● The cell phone is now connected to the main
unit.
ATTE NT ION
If connection is not successful, "FAILED" will appear
on the display. When this happens, perform the
connection procedure again.
Answering a phone call / Hanging
up (Refusing a call)
a
b
a Touch [ ] while the phone is ringing.
• A phone connection is made, and you can start
talking.
b Touch [ ] on the dialing screen.
• The call will be disconnected.
a
Various settings of the hands-free
function
a
On the PhoneSetting screen, touch the
b
setting switch for each item to perform the
following settings.
English
Making a call
a
a
b
a On the hands-free screen, touch numbers
between [0] and [9] to input the phone
number.
• Touch [Clear] to erase digits one at a time.
b Touch [ ] when you have input the
phone number.
b
● The input phone number is dialed.
Auto Answer :
Automatic call answering can be set.
Ringtone :
The ring tone can be set.
Auto Connect :
Registered cell phones can be connected to
the main unit automatically.
SP Select :
The speakers that output the sound for
hands-free can be configured.
Change Code :
The PIN CODE can be changed by touching
[Change Code].
3
Loading...