Instruction for usage of Bluetooth device
■What is like " Bluetooth device”?
By connecting Bluetooth portable Audio player (hereinafter
called portable device) or Hands-free phone* which
operation is confirmed, to the system, you will be able to use
portable device without operating a portable device.
* Including Audio player in a Hands-free phone. The
operation of an adaptor for Bluetooth audio is not confirmed.
You can check if the operation of your portable device is
confirmed at TOYOTA dealer or on the following website.
・The U.S. main･land : http://www.toyota.com
・Hawaii : http://www.toyotahawaii.com
・Canada: http://www.toyota.com
The portable device must be complied with the following
specification to connect this system.
Please understand that some functions in this system may be
limited by the model of portable device.
■Required Bluetooth Specification for cellular phone or
portable audio player
Ver.1.1 or above
■Required profiles for a cellular phone
・ HFP (Hands Free Profile)
Ver. 1.0
・ OPP (Object Push Profile)
Ver. 1.1
■Required profiles for a portable audio player
・ A2DP (Advanced Audio Distribution Profile)
Ver.1.0
・ AVRCP (Audio/Video Remote Control Profile)
Above Ver.1.0 (Above Ver.1.3 is recommended.)
Bluetooth is trademark owned by Bluetooth SIG. Inc
The frequency band is adopted for industrial, scientific,
medical and amateur radio service, besides this device.
(Hereinafter called other wireless stations for the above
services) Before using this system, ensure there is no
wireless station near this device, which is under operation.
If you would find this device would cause harmful
interference toward other wireless stations, move to another
location to prevent the interference.
■Certifications for this system
FCC ID: BABFT0001A
IC: 2024B-FT0001A
Note:
This device complies with Part15 of the FCC Rules and
RSS-Gen of the IC Rules. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
inference received, including interference that may cause
undesired operation.
Change or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operative the equipment.
!
Warning
Don't operate portable device while driving.
!
Caution
• Don't leave portable device in the vehicle to prevent
damage. (Under the scorching sun, temperature in a
vehicle will be very high)
• Don't use portable device near the system. It may
cause the debased sound quality, or bad connection
status.
Note
• If you would use other wireless equipment near this system.
It may cause a bad effect on the connection of each device.
• By connecting Bluetooth, the battery of portable device will
run out faster.
When you use this system with a hands-fr ee phone.
If you would use 2 portable devices such as Bluetooth
Audio and Hands-free phone, it may cause the
following situations.
・ The Bluetooth connection of portable device may be
disconnected.
・ The performance of the portable device may be slow.
The connection to portable device may be
disconnected when the phone book is transferring
from hands-free phone. In this case, the connection
may be re-connected after the completion of transfer
(Some models may not be re-connected.)
About Indications on display
■The connection of Bluetooth
The status of Bluetooth connection is displayed as below
display image.
This indication on display shows Bluetooth
connection is in good status.
Please use portable device or Hands-free phone
under this condition.
When there is no mark on the display, it shows
Bluetooth connection is not active. You cannot use
this system under this condition.
Please check the portable device or Hands-free
phone is selected correctly. If the portable device is
not registered in the system, please register the
portable device or Hands-free phone first before
using this system.
Note:
The antenna for Bluetooth connection on vehicle side is built
in a display. Under the following condition, Bluetooth
connection may not be in function.
• Portable device is lie on a position where
wireless
system, or between Hands-free phone and the system,
such as on backside of seat, globe box, or in console box.
• Portable device is touched or covered by things in metal.
communication between portable device and the
For good Bluetooth connection, place the portable
device so that mark will be shown on display
as the above.
encumber
Bluetooth Audio
Bluetooth setting
■To register a portable device
To use Bluetooth audio, it is necessary to register a
portable device in the following steps.
・ Up to 2 portable devices can be register in the system.
・ As for the operation of a portable device, see the users'
manual that comes with it.
1. Press several times until "BT AUDIO" will appear.
Then press the button indicated 'SETUP' in the screen.
2. While turning TUNE-SCROLL knob, select "Pair Audio"
then "Record name.” After hearing blip, speak the
desired name of portable device.
3. The registration of portable device will be completed
after selecting "Confirm" then " Car M_Media" by
turning TUNE-SCROLL knob.
Note: You hav e to register passkey of portable device into the
system in advance.
4. If "Failed" is indicated, start over from the step 1.
■To connect a portable device
The portable device can be connected to a vehicle both
automatically and manually.
As for the operation of a portable device, see the users'
manual that comes with it.
■To connect automaticall y
The system will automatically establish Bluetooth
connection with a portable device, which is connected last
time, when ACC or IG mode is switched on.
■To check Bluetooth connection
When Bluetooth is connected in the stable condition,
ｗill appear on the display. Please check this indication
when using.
■When automatic connection is failed.
The automatic connection will be performed for certain
duration of time. When it doesn't succeed in connecting
during the time, try it manually.
■To connect manually
Connect Bluetooth manually when failing in automatic way,
or when automatic connection mode is off.
1. Press several times until "BT AUDIO" will
appear. Then press the button indicated
'SETUP' in the screen.
2. Select portable device to connect after selecting
"select Audio" by turning TUNE-SCROLL knob.
3. You can connect the portable device by selecting
"From Car"
4. If "Failed" is indicated, start over from the step 1.
■To reconnect Bluetooth
When Bluetooth connection is disconnected due to low radio
transmission circumstance, Bluetooth will perform an
automatic connection.
Note: The automatic connection will be performed only for
certain duration of time. If the connection wouldn’t be
established during the time, try it manually.
Some portable devices model may not support
Note:
this function.
■When Bluetooth connection is disconnected on purpose
The automatic reconnection will not work when Bluetooth
has been disconnected on purpose, such as when
disconnected from the portable device side. In this case,
reconnect in either of the following ways.
・ Connect it manually
・ Reselect the portable device again.
■To change a name of a p ortable device
The name of portable device that appears on the display
can be changed as desired.
・ Even if the name of a portable device is changed at
the system, the registered name in portable device will
not be changed automatically.
1. Press several times until "BT AUDIO" will
appear. Then press the button under the indicated
“SETUP” on the display.
2. Select portable device to connect after selecting
"change Name" by turning TUNE-SCROLL knob.
3. Then select "NAME" and "RECORD NAME" on the
display after hearing blip read aloud a desired n ame
to be registered.
4. To complete the change, press “CONFIRM” on the
display.
■To change the Bluetooth setting of the system
・pass key
It is a password, which is used when you register a
portable device into the system. It can be changed to the
desired 4 to 8 digit numbers.
■To Initialize the Bluetooth setting
You can reset each setting you have made before.
1. Press a button under the indicated “SETUP” on the
display.
2. Find “System Setup” by turning TUNE-SCROLL knob
and press the knob to select.
3. Then find “Initialize” b y turning TUNE-SCROLL knob,
and press the knob to select.
4. Then find “Confirm” by turning TUNE-SCROLL knob,
and press the knob to completion.
■To delete the registration of a portable device
1. Press a button under the indicated “SETUP” on the
display.
2. Then find “Delete Audio” by turning TUNE-SCROLL
knob, and press the knob to complete.
How to use Bluetooth Audio
w
You can play the connected portable device. To use Bluetooth audio, you have to register the portable device on the system.
Seek sw
Tune scroll knob
Type Folder sw
Text s
Scan sw
About Indication on desplay
Depending on portable device models, artist names,
album name, or truck name may not be indicated on
the display.
To use Bluetooth Audio
Register a portable device to the the system (see
page 256)
Note:
Upon some portable device models, following
circumstance may be caused by connecting.
・ You cannot operate on the system side.
・ behavior or volume may be different.
・ The indications such as track or time information,
may be different between portable device and
the system side.
・ The connection may be disconnected when you
turn off the portable device. In this case, connect
manually.
When the connection between portable device and
the system is not stable, you may not operate the the
system. In this case, check if the connection status is
fine on the display, and retry the operation.
To Pause
See the previous page for Bluetooth audio operation
image on the display.
・ Press button to pause.
・ And Press botton again to play trucks
To Select an album
Upon connecting to a portable device,
See the previous page for the display image for
Bluetooth audio operation.
・ To select previous album.
Press
∨side of the botton
・ To select following album
Press
∧side of the botton.
Note: Some portable devices may not support this
function.
To Select a track
Upon connecting to a portable device,
See the previous page for the display image for
Bluetooth audio operation.
You can select a track with
・ Press
∨side to select previous
album.
・ Press
∧ side to select next
album.
botton.
Fast-Forward / Fast Rewind
Upon connecting to a portable device,
You can Fast-Forward or Fast-Rewind with
botton
・ To fast-forward
press and hold
∧ side of the
botton
・ To fast-rewind
press and hold
∨ side of the
botton
Track will be played again when you release the
botton
Note: Upon Some portable devices model, even
after releasing the button, fast-forwarding or
fast-rewinding may be continued.
In this case, Press again
play again a track.
button to
Loading...