Page 1
2D Code Scanner
GT-10 Series
Excellent Performance in
Stable Casing
Page 2
GT-10 Series: Excellent Performance on the Inside –
Protection Against Impact, Water and Dust on the Outside.
The GT-10 scanner range takes maximum
advantage of its performance features:
versatility, long life and user friendliness.
High Performance
CCD (Charged Coupled Device) Technology
• No moving parts
• Particularly robust
Excellent Scanning Performance
• Long distance scanning in excess of 1 m
thanks to CCD technology
• Above-average reading speed of 2D
codes (GT-10Q) and bar codes*
• Easy recognition of even damaged 2D
code labels (GT-10Q)
• Scanning of broad bar codes
Aiming beam mode (GT-10Q)
• 2D codes (laser beam)
• Bar codes (laser beam)
• Only reads the code envisaged by the
beam
• Simultaneous reading of different codes
is possible – up to four 2D codes can be
read at once
Highly Durable
Impact Resistance
• Increased protection due to new stronger
casing and the use of rubber to improve
impact protection (from max. 2 m high)
High Performance
Dust and splash proof to meet the IP54
Standard
• Water and dustproof even under rough
working conditions
Versatile
Wide range of functions
• Bar code comparison: Determines if a
scanned barcode matches a master
bar code stored in the GT-10
• Programmable data formatting (GT-10Q):
Easy configuration of the output data for
all existing host systems
• Check for wrong parts:
(1) A bar code is read from the
shipping instructions and
registered as the master code.
(2) A bar code from a product
to be shipped is scanned
and then compared with the
master code so that it can be
approved for shipping.
• Auto-sensing function:
The auto-sensing function automati-
cally begins scanning when it detects
a label
• Remote ON/OFF function:
Scanning can be switched on and off
using commands from a host computer
One-touch user function
• Two scanning possibilities:
(1) using Magic Key (on top of scanner)
(2) using trigger (inside of grip)
• Code differentiation (GT-10Q):
Once two different symbol records have
been registered it is possible to switch
from one to the other using the Magic
Key – this prevents reading incorrect
codes in multiple-read mode
Highly Durable
Versatile
*Comparison test when reading up to 150 characters of QR code
Available in black and grey
Page 3
• ON/OFF function:
The scanner is in standby mode when the
Magic Key is off.
Transfer of selected characters
• The data to be transmitted (e.g. opera-
tion start codes) can be set beforehand
when the Magic Key is on
Retransmit scanned data
• Scanned data can be retransmitted when
the Magic Key is on without the bar code
having to be scanned again
User-friendly
Very practice-orientated
• Marking function (GT-10Q):
laser lighting of the scan area and its
centre point
• Vibrator function:
Completion of the scanning operation
confirmed with vibration
• Adjustable buzzer volume:
3 levels of buzzer volume to suit the
surrounding environment
• Very bright, three-colour LED:
Easy to read scanning information
Technical Data
(1): Ambient illumination 500 lux, ITF/16 columns on label, when PCS = 0.9.
(2): An attempt to make a connection may fail if the PC or USB hub used is not compatible. Check transfer compatibility.
(3): Test value, not guaranteed.
Simple set-up with intuitive software
• Installation software included in scope of
delivery
• Easy parameter setting from a PC with
the set-up software
• Quick start programme:
Printing and configuring barcodes with
the aid of the special installation soft-
ware – the GT-10 is ready immediately
User-friendly
GT-10B GT-10Q
GT-10B-SM (Standard Range Type) GT-10B-LM (Long Range Type) GT-10Q-SR GT-10Q-SU
(RS-232C) (USB)
Scanner Readable Codes Bar Codes EAN-13/8, UPC-A/E, UPC/EAN (with add-on), Interleaved 2 of 5, STF, CODABAR (NW7), CODE39, CODE93,
CODE128 (EAN-128), MSI, Plessey
2 Dimensional Codes QR Codes, Micro QR Codes, DataMatrix
(ECC200), PDF417, Maxi Code,
RSS variants, Micro
Resolution Bar Codes 0.125 mm 0.19 mm 0.15 mm
2 Dimensional Codes 0.25 mm
Image capture funktion Ja
Focusing point 100 mm
Marker Scanning area marker
Scanning area (at Narrow bar 0,5 mm)
(1)
0 ~ 350 mm max 0 ~ 700 mm max
PCS value 0.45 min
Scanning angle (angle of elevation) 40° ≥a ≥ 0°
Skew angle 360 degrees
Elevation and inclination ± 35 degrees
Reading confirmation Blue-green-red LED, buzzer (with volume control), vibrator
I/F Format/Connector Type/Cable Length Multi Interface: programmable as RS-232C or keyboard interface RS-232C/ USB 1.1 Compliant/
Dsub-9S USB Typ A
Input Power Operating Voltage Range 4.75 ~ 5.25 V
Power Consumption While Scanning: 200 mA max
Power supply AC adapter Supply from
connected device
(2)
Environmental Water proof IP 54 (Equivalent to JIS Splash resistance)
Requirements Shock-resistant 2 m (1 x 6 directions onto concrete floor)
(3)
Operating Temperature Range 0 °C ~ 50 °C
Operating Humidity 10 ~ 90 % RF (No condensation or frost) 10 ~ 99 % RF
(No condensation or frost)
Operating ambient illumination 500 lux ~ 10 000 lux (daylight florescent lighting) 20 lux ~ 10 000 lux (daylight florescent lighting)
Weight (unit only) Approx. 190 g (without cable) Approx. 210 g (without cable)
Page 4
Optional Accessories (not supplied)
• Stand: can be used as desktop or wall
stand
• Hands-free stand: variably adjustable –
for hands-free scanning with the GT-10
• Hanging straps:
The hanging straps keep the GT-10 a
safe distance from forklift trucks,
conveyor belts etc.
• Stand for ceiling mounting (available
soon):
Enables the GT-10 to be ceiling mounted
Accessories
• Connecting cable
• AC/DC Adapter (only with RS-232C
version)
• Operator’s Manual
(Operator’s Manual can be downloaded
at www.denso-id.de free of charge)
Software
• Set-up software:
(Set-up software can be downloaded at
www.denso-id.de free of charge)
www.denso-id.de
Accessories Dimensions (in mm)
Hinweise
Carefully read the user manual before using the device. Specifications are subject to change without notice. Information current as of
June 2004.
Note
DS 001-gb-08/04-6000-1
Software
Toyota Tsusho Europe S.A. · Denso ID Systems Department
Carl-Schurz-Straße 2, 41460 Neuss, Germany
Phone +49 2131-36 91-0 · Fax +49 2131-3691-502 · info@denso-id.de
Company Stamp
Optional Accessories (not supplied)
82
103
165
Loading...