Denon DJ DN-X900 User Manual

DN-X900

Professional 19-inch Analog/Digital Matrix Mixer

This analog/digital mixer gives plenty of reasons to make the switch to digital.

alternate means to move digital audio “from” and “to” sound cards, while maintaining the utmost fidelity. The DN-X900 offers 4 coaxial digital inputs with 24-bit digital processing and 2 digital outputs that feed a CD-R burner or computer for recording purposes with a unique Track Mark ID function! Rock-solid construction, superb audio fidelity, high

q core design ingredients. Unique features provide mobile and club DJs flexibility and in input matrix routing gives the freedom to move any source to any channel or the same source to multiple channels for remixing. Pre-fader level metering and gain control and long 60mm smooth channel faders are individua able with the optional rotary knob (ACD-46 kill, booth output with channel select, 2 mic inp effects send/return with cue, dry/wet knob and channel select make this the mixer you’ve been waiting for.

www.denondj.com

Computer-based DJs want an

y part

s and reliability are the

uitive control. Eight-channel

y replace-

). Three-Band EQ with full output

uts with talkover sensitivity and

ADVANCED FEATURES

Matrix Input Assignment

No longer does your device need to be married to a particular channel. Eight input sources are freely assignable to any channel or even multiple channels.

4 Digital Inputs / 8 Line / 3 Phono Switchable

4 Smooth 60mm VCA Channel Faders

Flex Fader 45mm VCA Cross Fader with Contour Adjust

The tension on this crossfader can be adjusted freely.

rack Mark

No need to r right from the mixer.

Independent Channel PFL Meters

All input levels can be pre-adjusted in advance to match the gain levels, insuring a smooth transition between fades.

Independent 3-Band EQ Kill (high-mid-low)

Independent EQ On/Off Switch

Booth Output Assign Selector

Pre-monitor any channel including Master through the booth output in the same manner as you would with your headphones, with volume contr

Exter

Independent Channel A-B Post Switch (crossfader)

Powerful Clean Headphone Output

each over to your CD-R burner anymore. Make new track increments

ol!

nal Send/Return Control

– Multi Channel Assignable – Effect On/Off – Effect Cueing (Pre & Post) – Effect Dry/Wet Knob

continued on next page

DN-X900

SPECIFICATIONS

GENERAL Dimensions 19.0 (W) x 4.4 (H) x 6.9 (D) inch

482 (W) x 112.5 (H) x 177 (D) mm

Weight 5.9 kg, 13 lbs. Power Supply AC120 V ±10%, 60 Hz Power Consumption 33 W

AUDIO SECTION Input Level and Impedance

8-Line -14 dBV (200 mV) 50kΩ/kohms 3-Phono -50 dBV (3.0 mV) 50 kΩ/kohms Effect (Return) -14 dBV (200 mV) 50 kΩ/kohms Main Mic -54 dBV (2.0 mV) 10 kΩ/kohms Aux Mic -60 dBV (1.0 mV) 10 kΩ/kohms

Output Level and Impedance

Balanced 4 dBm (1.23 V) 600 Ω/ohms Unbalanced 0 dBV (1.0V) 1 kΩ/kohms Booth/Zone (Balanced) 4 dBm (1.23 V) 600 Ω/ohms load Rec (RCA) -10 dBV (316 mV) 1 kΩ/kohms Effect (Send) -14 dBV (200 mV) 1 kΩ/kohms Subwoofer/Lighiting 2 dBm (975 mV) 600 Ω/ohms Headphone 0 dBV (1.0 V) 32 Ω/ohms

Frequency Response

Line 20 to 20 kHz ±2 dB Phono 20 to 20 kHz RIAA ±2 dB Mic 20 to 20 kHz ±2 dB

Signal to Noise Ratio

Line 82 dB (0 dBm, 1 kHz, EQ flat) Phono 75dB (0 dBm, 1 kHz, EQ flat) Main Mic 65 dB (0 dBm, 1 kHz, EQ flat)

OTHER FEATURES continued

Fader Start (5V pulse) Cross Fader and Channel Fader-Start Trigger is compatible with all Denon DJ CD/MP3 players.

Compact 4U Rack Space with Recessed Rear Terminals

Independent 3-band Main and Aux Mic EQ

Mic Talkover Function with Sensitivity Adjustment

Independent CUE System (all channels)

Split / Cue Headphone Monitor with PFL Metering

Master Output -10dB Attenuation Switch

Master Output Stereo/Mono Switch

Zone Output with Volume Adjust

Record Out – RCA/Unbalanced

2 Digital Outputs – Toslink/SPDIF

Subwoofer/Lighting Output with Frequency Adjust

speakers, powered amp or even a signal feed for lighting systems.

Gold Plated RCA Connectors

Optional Rotary Knob Kit (Model: ACD-46) A DJ or club owner can easily

swap out any channel fader (1 to 4) and replace them with our optional ACD-46 rotary knob kits, making the DN-X500 appealing to both fader and knob style DJs. With its powerful matrix routing option, it doesn’t matter where they get installed

(see fig.1)

Ideal for powered

Total Harmonic Distortion Rate

Line Below 0.05% Phono Below 0.05% Cross Talk Over 70 dB

Channel Equalizer

Hi +10 dB, -35 dB (16 kHz) Mid +10 dB, -35 dB (1 kHz) Low +6 dB, -35 dB (60 Hz)

Microphone Equalizer

Hi +12 dB, -12 dB (10 kHz) Mid +12 dB, -12 dB (1 kHz) Low +12 dB, -12 dB (100 Hz)

Digital Output (COAXIAL/TOSLINK)

Signal Format IEC958 Type II Output Level 0.5 Vp-p 75 Ω/ohms Output Signal Level -6 dB

Digital Input (COAXIAL)

SPDIF 32-48kHz 16,20bit Input Level 0.5 Vp-p 75 Ω/ohms

Figure 1

ACD-46 Option

DENON DJ USA

1100 Maplewood Drive Itasca, Illinos 60143 T: 630.741.0330 F: 630.741.0652

DENON DJ CANADA

5-505 Apple Creek Blvd Markham On L3R5B1 T: 905.475.4085 F: 905.475.4159