DN-X500
Professional 19-inch Matrix
Mixer with Rotary Option
We listen, we understand, we
build. The result is our DN-X500
rackmount mobile/club DJ
mixer.
superb audio fidelity, high quality
parts, and of course reliability are
the core ingredients of our design.
The DN-X500’s unique features
provide Mobile and Club DJs
tremendous flexibility and intuitive
control. Eight-channel input matrix
routing gives you the freedom to
move any source to any channel or
even the same source to multiple
channels for remixing. Pre-fader
level metering and gain control
as well as Long 60 mm smooth
channel faders are ind
replaceable with our rotary knob
option (ACD-46). Three-Band EQ
wit
wit
wit
effect
dr
sho
yo
Rock solid construction,
ivid
ually
l, boot
ut kil
utp
l o
l
h fu
end/
elect
urn wit
ret
aiting for
h channel s
alkover sensitivity and
h t
s s
et knob and channel s
w
y/
uld make this mixer the one
e been w
v
u’
h o
o mic inputs
w
, t
h cue
.
utput
,
elect
ADVANCED FEATURES
Matrix Input Assignment
No longer does your device need to be married to a particular Channel. Eight
input sources are freely assignable to any channel or even multiple channels.
8 Line / 2 Phono Switchable
4 Smooth 60mm VCA Channel Faders
Responsive 45mm VCA Cr
Independent Channel PFL Meters
All input levels can be pre-adjusted in advance to match the gain levels, insuring a
smooth transition between fades.
Independent 3-Band EQ Kill (high-mid-low)
Independent EQ On/Of
Booth Output Assign Selector
Pre-monitor any channel including Master through the booth output in the same
manner as you would with your headphones, with volume control!
External Send/Return Control
– Multi Channel Assignable
fect On/Of
– Ef
– Effect Cueing (Pre & Post)
– Effect Dry/Wet Knob
Independent Channel A-B Post Switch (cr
Powerful Clean Headphone Output
Fader Start (5V pulse)
Cross Fader and Channel Fader-Start Trigger is compatible with all Denon DJ
CD/MP3 players.
f
oss Fader with Contour Adjust
f Switch
ossfader)
continued on next page
www.denondj.com
DN-X500
SPECIFICATIONS
GENERAL
Dimensions 19.0 (W) x 4.4 (H) x 6.9 (D) inch
Weight 5.8 kg, 13 lbs.
Power Supply AC120 V ±10%, 60 Hz
Power Consumption 27 W
AUDIO SECTION
Input Level and Impedance
-Line -14 dBV (200 mV) 50 kΩ/kohms
8
2-Phono -50 dBV (3.0 mV) 50 kΩ/kohms
Effect (Return) -14 dBV (200 mV) 50 kΩ/kohms
Main Mic -54 dBV (2.0 mV) 10 kΩ/kohms
Aux Mic -60 dBV (1.0 mV) 10 kΩ/kohms
Output Level and Impedance
Balanced 4 dBm (1.23 V) 600 Ω/ohms
Unbalanced 0 dBV (1.0V) 1 kΩ/kohms
Booth (Balanced) 4 dBm (1.23 V) 600 Ω/ohms load
Rec (RCA) -10 dBV (316 mV) 1 kΩ/kohms
Effect (Send) -14 dBV (200 mV) 1 kΩ/kohms
Subwoofer/Lighiting 2 dBm (975 mV) 600 Ω/ohms
Headphone 0 dBV (1.0 V) 32 Ω/ohms
Frequency Response
Line 20 to 20 kHz ±2 dB
Phono 20 to 20 kHz RIAA ±2 dB
Mic 20 to 20 kHz ±2 dB
Signal to Noise Ratio
Line 82 dB (0 dBm, 1 kHz, EQ flat)
Phono 75 dB (0 dBm, 1 kHz, EQ flat)
Main Mic 65 dB (0 dBm, 1 kHz, EQ flat)
482 (W) x 112.5 (H) x 177 (D) mm
OTHER FEATURES continued
Compact 4U Rack Space with Recessed Rear Terminals
Independent 3-band Main and Aux Mic EQ
Independent CUE System (all channels)
Mic Talkover Function with Sensitivity Adjustment
Split /Cue Headphone Monitor with PFL Metering
Master Output -10dB Attenuation Switch
M
aster Output Stereo/Mono Switch
Record Out - RCA/Unbalanced
Subwoofer/Lighting Output with Frequency Adjust
speakers, powered amp or even a signal feed for lighting systems.
Optional Rotary Knob Kit, Model: ACD-46 A DJ or club owner can easily
swap out any Channel Fader (1 to 4) and replace them with our Optional ACD-46
Rotary Knob Kits, making the DN-X500 appealing to both Fader and Knob style
ith its powerful matrix routing option, it doesn’t matter where they get
DJs. W
installed (see figure1)
Figure 1
Ideal for powered
Total Harmonic Distortion Rate
Line Below 0.05%
Phono Below 0.05%
Cross Talk Over 70 dB
Channel Equalizer
Hi +10 dB, -35 dB (16 kHz)
Mid +10 dB, -35 dB (1 kHz)
Low +6 dB, -35 dB (60 Hz)
Microphone Equalizer
Hi +12 dB, -12 dB (10 kHz)
Mid +12 dB, -12 dB (1 kHz)
Low +12 dB, -12 dB (100 Hz)
ACD-46 Option
DENON DJ USA
1100 Maplewood Drive
Itasca, Illinos 60143
T: 630.741.0330
F: 630.741.0652
DENON DJ CANADA
5-505 Apple Creek Blvd
Markham On L3R5B1
T: 905.475.4085
F: 905.475.4159
© 2008 D&M Professional.
All Rights reserved.