Denon DVD558 User Manual

Download

Page 1

DVD-558

DVD VIDEO PLAYER

Page 2

WARNING

: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFEGUARDS

Read Instructions - All the safety and operating instructions should be read before the product is operated.

2) Retain Instructions - The safety and operating instructions should be retained for future reference.

3) Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.

4) Follow Instructions - All operating and use instructions should be followed.

5) Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6) Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7) Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8) Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table.The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10)

Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

11)

Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12)

Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13) Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,

PORTABLE CART WARNING

(Symbol provided by RETAC)

S3125A

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The caution marking is located on the rear of the cabinet.

paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14) Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.

15) Power lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16) Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17) Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18) Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen into

the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions as an improper adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician to

restore the product to its normal operation. e)

If the product has been dropped or damaged in any way.

f) When the product exhibits a distinct change in

performance - this indicates a need for service.

20) Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

21) Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22) Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

–2–

Page 3

PRECAUTIONS

Wall

10cm or more

Laser Safety

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO

BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

FCC WARNING-This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

English

This Class B digital apparatus complies with Canadian ICES-003.

CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Non-use periods - Turn off the unit when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms.

Please read this operating instructions carefully before using your DVD player, and keep it for future reference.

Important

Use only discs marked with logos listed on page 6.

Power Supply

The main power supply is engaged when the main plug is plugged in a 120V, 60Hz AC outlet. To operate the unit, press the ON/STANDBY button to turn on the unit.

Warning

To avoid fire or electric shock, do not expose this unit to rain or moisture.

WARNING: LIVE PARTS INSIDE.

Cautions on Installation

Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV. If this happens, take the following steps:

• Install this unit as far as possible from the tuner or TV.

• Set the antenna wires from the tuner or TV away from this unit’s power cord and input/output connection cords.

•

Noise or disturbance tends to occur particularly when using indoor antennas or 300Ω/ohms feeder wires. We recommend using outdoor antennas and 75Ω/ohms coaxial cables.

NOTE:

• For heat dispersal, do not install this equipment in a confined space such as a book case or similar unit.

DO NOT REMOVE ANY SCREWS.

Installation Location

For safety and optimum performance of this unit:

•

Do not stand the unit up vertically. Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.

•

Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.

• Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the unit.

–3–

Page 4

PRECAUTIONS

Dew Warning

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the DVD Player at least for 2 hours until its inside is dry.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Caution

1) Do not attempt to open the cabinet.There are no parts you can service inside. Refer all servicing to qualified service personnel.

Slot and openings in the cabinet and at the side or bottom are provided for ventilation.To ensure reliable operation and to protect the unit from overheating these opening must not be blocked or covered. Avoid enclosed spaces such as book cases unless proper ventilation is provided.

TABLE OF CONTENTS

■

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . 2

■

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Cautions on Installation . . . . . . . . . . . . . . . . . . . . . . . . . 3

Dew Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Avoid the Hazards of Electrical Shock and Fire . . . . . . . 4

Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

■

INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notice for the Progressive Scan Outputs . . . . . . . . . . . . 5

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5

■

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

■

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8

FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8

Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Displays During Operation . . . . . . . . . . . . . . . . . . . . . . 10

Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using a Remote Control. . . . . . . . . . . . . . . . . . . . . . . . 10

■

CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Description - Rear Panel . . . . . . . . . . . . . . . . . . . . . . . 11

Connection to an Audio System. . . . . . . . . . . . . . . . . . 12

Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 13

Connection to a TV with an HDMI compatible port . . . . 14

Connecting the AC Cord . . . . . . . . . . . . . . . . . . . . . . . 14

■

DISC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

HDMI Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Brightness of the Front Panel Display. . . . . . . . . . . . . . 15

TV TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CALLING UP A MENU SCREEN DURING

PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Still / Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3) Keep the unit away from the radiator heat sources.

4) Avoid using near strong magnetic fields.

5) Do not push objects of any kind into this through the cabinet slot as they could touch current carrying parts or short circuit parts resulting in a fire or electric shock.

6) Never spill liquid of any kind on this unit. If liquid is spilled into the unit, consult qualified service engineer.

7) Use this unit in a horizontal (flat) position only.

8) This equipment is in Stand-by mode when it turns off whilst the power cord is connected.

9) Keep the set free from moisture, water and dust.

10) Handle the power cord carefully. Hold the plug when unplugging the cord.

11) All the safety cautions and operating instructions should be read before the DVD player is operated.

12) Use caution not to pinch your finger in the disc slot.

13) Do not put heavy objects on the AC power cord.

14) K eep the AC power cord away from heat appliances.

15) Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the DVD player.

16) Do not put any pressure to the DVD player when carrying.

17) Do not use the DVD player outdoors.

Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 16

Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 16

Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 16

Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 16

By using the SEARCH MODE button . . . . . . . . . . . . 16

By using the SKIP buttons HG . . . . . . . . . . . . 16

Tr ack Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

By using the SEARCH MODE button . . . . . . . . . . . . 17

By using the SKIP buttons

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 17

Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 17

REPEAT TRACK / GROUP / ALL . . . . . . . . . . . . . . . 17

A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . . 18

Changing the On-Screen Display. . . . . . . . . . . . . . . . . 20

Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Dialog Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Picture Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

■

DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Ratings Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

RATING LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 24

CONTROL LEVELS. . . . . . . . . . . . . . . . . . . . . . . . . 25

Others Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Reset to the Default settings

(except for Ratings Control) . . . . . . . . . . . . . . . . . . . . 25

Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . 25

■

TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 26

■

SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

■

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HG . . . . . . . . . . . . 17

–4–

Page 5

INTRODUCTION

RC-1018

The serial number of this product may be found on the back of the DVD player. No others have the same serial number as yours.You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

U. S. Patent Nos, 4,631,603, 4,819,098, 4,907,093, 5,315,448 and 6,516,132.

Notice for the Progressive Scan Outputs

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 480 (525) or 576 (625) progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 480p (525p) or 576p (625p) DVD player, please contact our customer service center.

English

Supplied Accessories

Please check to make sure the following items are included with the main unit in the carton.

Remote control

• •

“AA” (R6P) batteries

• • • • • • • •

Audio cable

• • • •

Video cable

• •

AC cord

• • • • • • •

Operating Instructions

• • • • • • • •

Service Station

• • • •

List

Warranty

• • •

Card

Symbols Used in this Manual

The following symbols appear below in some headings and notes in this manual, with the following meanings.

: Description refers to playback of DVD-Video discs. (including DVD-R/RW discs)

DVD

: Description refers to playback of Audio CDs.

: Description refers to playback of discs formatted with MP3.

MP3

JPEG

WMA

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

: Description refers to viewing of JPEG discs.

: Description refers to playback of discs formatted with WMA.

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.

–5–

Page 6

ABOUT THE DISCS

DVD-Video

*1, 2, 4

*2, 3, 4, 5,

6, 7, 8

*2, 4

*2, 3, 4, 6,

7, 8

*2, 3, 4, 6, 7

DVD-R

DVD-RW

Audio CD

CD-R

CD-RW

Digital video

(MPEG2)

MP3

WMA

Digital picture

(JPEG)

Region code

Mark (logo)

Playable

discs

Recorded

signals

Disc size

Disc types

12 cm

8 cm

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1

Chapter 2

Chapter 3 Chapter 4

12 cm

8 cm

Digital audio

MP3

WMA

Digital picture

(JPEG)

Example

Group 1 Group 2

Tra c k 1

Tra c k 2 Track 5

Tra c k 6

Tra c k 3

Tra c k 4

Example

Tra c k 1

Tra c k 2

Tra c k 5

Tra c k 6

Tra c k 3 Track 4

Audio CD

(DVD-R/RW only)

Picture CD

12 cmJPEG

MP3,

JPEG,

WMA

Example

Group 1 Group 2

Tra c k 1

Tra c k 2 Track 5

Tra c k 6

Tra c k 3

Tra c k 4

MP3,

JPEG,

WMA

Playable Discs

is a trademark of DVD Format/Logo Licensing Corporation.

is trademark of Eastman Kodak Company.

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1:

Certain DVD discs do not operate as described in this manual due to the intentions of the disc’s producers. *2: Scratched or stained discs may not be played back. *3: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs. *4: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not

play them back. Even if they are played back, the sound or video quality will be compromised. *5: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be

played back at all or normally (the picture or sound may be distorted, etc.). *6: If there is too much recording space left on a disc (the used portion is less than 2-3/16 inches (55mm

across)), it may not play back properly.

Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.

*7: *8: This player cannot play the disc contents protected by Windows Media Digital Rights Management (DRM).

¡ NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / CD-i / Photo CD /Video CD/ DVD with region codes other than 1 or ALL / DVD-ROM for personal computers / CD-ROM for personal computers

¡ On the following disc, the sound MAY NOT be heard.

Super Audio CD / DVD-Audio

NOTES:

• Only the sound recorded on the normal CD layer can be delivered. (Super Audio CD)

• The sound recorded on the high density Super Audio CD layer cannot be delivered. (Super Audio CD)

• Disc with the Video zone can be played. (DVD-Audio)

• Disc only of the Audio zone cannot be played. (DVD-Audio)

¡ Any other discs without compatibility indications

CAUTION:

• Use caution not to pinch your finger in the disc slot.

• Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the DVD player.

–6–

Page 7

FEATURES

¡Progressive Scan system

The progressive scan system provides less flickering and images in higher resolution than that of traditional 480i (525i), 576i(625i) or multi television signals through the interlace scan system.

¡TV Type

Use this to set your TV’s video format. (MULTI, NTSC or PAL)

¡Dolby Digital Sound

By hooking up this player to a Multi-Channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital Multi-channels surround sound as heard in the movie theaters.

¡DTS (Digital Theater System)

When this player is connected to the DTS decoder, you can enjoy Multi-channel surround system which reproduces the original sound as truthfully as possible. Multichannel surround system is developed by DTS, Inc.

¡HDMI (High Definition Multimedia Interface)

You can enjoy clearer video output when connecting this player to a display equipment with an HDMI-compatible port.

¡Dialog Speed

Playback in slightly faster or slower speed while keeping the sound quality as in the normal playback. Dialog speed is available only on discs recorded in the Dolby Digital format.

¡Still/Fast/Slow/Step playback

Var ious playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.

¡Still Mode

The resolution of pictures while in the still (pause) mode can be adjusted.

¡Random Playback for Audio CD, MP3, JPEG and

WMA

This player can shuffle the playback order of tracks in random order.

¡Program Playback for Audio CD, MP3, JPEG and

WMA

You can program the playback order of tracks in a desired order.

¡DVD menus in a desired language

You can display DVD menus in a desired language, if available on a DVD.

¡Auto Power Off

The power turns off automatically if there is no activity at the player or its remote for more than 30 minutes (refer to page 25).

¡Subtitles in a desired language

You can select a desired language for subtitles if that language is available on a disc.

¡Selecting a camera angle

You can select a desired camera angle if a disc contains sequences recorded from different angles.

¡Choices for audio language and sound mode

You can select a desired audio language and sound mode if different languages and modes are available on a disc.

¡Ratings Control (Parental lock)

You can set the control level to limit playback of discs which may not be suitable for children.

¡Automatic detection of discs

This player automatically detects if a loaded disc is DVD-Video, Audio CD, MP3, JPEG or WMA.

¡Playing back an MP3 disc

You can enjoy MP3 files which are recorded on DVD-R/RW or CD-R/RW.

¡Direct Search

You can search the desired title, chapter, and track with numeric button during playback or in stop mode.

¡On-screen display

Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback) using the remote control.

¡Dimmer

The brightness of the display can be adjusted.

¡Screen Saver

The screen saver program starts if there is no activity at the player or its remote for more than 5 minutes. The brightness of the display is darken by 75%. The program is inactivated when there is any activity.

¡Picture Control

Picture Control adjusts Brightness, Contrast, Color, Gamma Correction and Sharpness of the specific display.

¡Search

Chapter search: Search for a desired chapter. Title search: Search for a desired title. Tr ack search: Search for a desired track. Time search: Search for a desired time point or a

title or a track.

¡Repeat

Chapter: Repeated playback of a chapter of the disc. Title: Repeated playback of a title of the disc. Tr ack: Repeated playback of a track of the disc. All: Repeated playback of the entire disc.

A-B: Repeated playback of a part between two

Group: Repeated playback of a folder of the

(exclude DVD)

points designated by user.

MP3/JPEG/WMA disc.

¡Zoom

2-time or 4-time magnified screen can be displayed.

¡Marker

Electric reference points designated by user can be called back.

¡Resume Playback

User can resume playback from the point at which the playback has been stopped.

¡Component Video Out Jacks

Jacks located on the back of the DVD Player which are used to send high-quality video to a TV via Component Video In Jacks.

¡Bit rate indication ¡DRC (Dynamic Range Control)

You can control the range of sound volume.

¡Displaying a JPEG picture

Kodak Picture CDs can be played back. Still images stored in JPEG format on DVD-R/RW or CD-R/RW can also be played back.

¡Reproducing WMA data

You can enjoy WMA files which are recorded on DVDR/RW or CD-R/RW.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

“WMA” (Windows Media Audio) is an audio codec developed by Microsoft®in the United States of America.

–7–

English

Page 8

FUNCTIONAL OVERVIEW

6/24

7/25

1098

RC-1018

15 16

18 19 20

32 3

28 27

25 11

7 4

FRONT PANEL

REMOTE CONTROL

1. ON/STANDBY (POWER ON/OFF) Buttons [page 15]

2. Disc loading tray

3. OPEN/CLOSE Button [page 15]

4. PLAY Button [page 15]

5. STOP Button [page 15] H (SKIP) Button [page 16]

6. G (SKIP) Button [page 16]

8. DIMMER NTSC/PAL Button [page 15]

9. REPEAT Button [page 17]

10. HDMI Button [page 15]

Press to set the HDMI connector’s video signal output mode.

11. STILL/PAUSE Button [page 16]

12. Display, Remote Sensor Window

13. HDMI indicator [page 15]

Lights up when there is video signal output from the HDMI OUT jack.

14. A-B REPEAT Button [page 18]

15. RANDOM Button [page 18]

16. ZOOM Button [page 16]

17. CLEAR Button [page 17]

18. ANGLE Button [page 22]

19. MENU Button [page 15]

20. ENTER Button [page 15]

21. Cursor Buttons [page 15]

22. RETURN Button [page 17]

23. SEARCH MODE Button [page 16] h (Fast Reverse SEARCH) Button [page 16]

24.

Press more than 2 seconds when you use the front panel button for this function.

25. g (Fast Forward SEARCH) Button [page 16]

Press more than 2 seconds when you use the front panel button for this function.

26. SETUP Button [page 23]

27. SUBTITLE Button [page 21]

28. TOP MENU Button [page 15]

29. DISPLAY Button [page 20]

30. AUDIO Button [page 21]

31. Numeric Buttons [page 15]

32. MODE Button [page 18]

The buttons with circled numbers can only be operated with the remote control.

–8–

Page 9

FUNCTIONAL OVERVIEW

6/24

7/25

1098

RC-1018

15 16

18 19 20

32 3

28 27

25 11

7 4

FRONT PANEL

REMOTE CONTROL

1. ON/STANDBY (POWER ON/OFF) Buttons [page 15]

2. Disc loading tray

3. OPEN/CLOSE Button [page 15]

4. PLAY Button [page 15]

5. STOP Button [page 15] H (SKIP) Button [page 16]

6. G (SKIP) Button [page 16]

8. DIMMER NTSC/PAL Button [page 15]

9. REPEAT Button [page 17]

10. HDMI Button [page 15]

Press to set the HDMI connector’s video signal output mode.

11. STILL/PAUSE Button [page 16]

12. Display, Remote Sensor Window

13. HDMI indicator [page 15]

Lights up when there is video signal output from the HDMI OUT jack.

14. A-B REPEAT Button [page 18]

15. RANDOM Button [page 18]

16. ZOOM Button [page 16]

17. CLEAR Button [page 17]

18. ANGLE Button [page 22]

19. MENU Button [page 15]

20. ENTER Button [page 15]

21. Cursor Buttons [page 15]

22. RETURN Button [page 17]

23. SEARCH MODE Button [page 16] h (Fast Reverse SEARCH) Button [page 16]

24.

Press more than 2 seconds when you use the front panel button for this function.

25. g (Fast Forward SEARCH) Button [page 16]

Press more than 2 seconds when you use the front panel button for this function.

26. SETUP Button [page 23]

27. SUBTITLE Button [page 21]

28. TOP MENU Button [page 15]

29. DISPLAY Button [page 20]

30. AUDIO Button [page 21]

31. Numeric Buttons [page 15]

32. MODE Button [page 18]

The buttons with circled numbers can only be operated with the remote control.

–8–

Page 10

FUNCTIONAL OVERVIEW

POWER ON/OFF Buttons

A-B REPEAT Button

REPEAT Button

MODE Button

SUBTITLE Button

DVD

• To switch the power between on and standby.

• To mark a segment between A and B for repeated

playback.

•

To mark a segment between A and B for repeated

playback. (CD)

• To repeat playback of a title or chapter.

• To repeat playback of a track or disc. (CD)

• To repeat playback of a track, group or

disc. (MP3, JPEG, WMA)

RANDOM Button

• To play back tracks in random order.

ZOOM Button

• To program a specific playback order.

•

To activate the 3D sound (Virtual surround system).

(CD, MP3, WMA)

•

To activate the Slide Show mode (JPEG)

• To magnify part of the picture (x2/x4).

ANGLE Button

• To access various camera angles on the disc.

• To access various subtitles on the disc.

AUDIO Button

DISPLAY Button

• To access various audio functions on the disc.

• To select STEREO, L-ch or R-ch. (CD)

• To display the current disc or HDMI mode.

•To display the current disc or HDMI mode.

• To search for a chapter, title, time or marker.

• To return to a location on the disc rapidly.

OPEN/CLOSE Button

• To search for a track.

• To search for time or a marker. (CD)

• To return to a location on the disc rapidly.

SEARCH MODE Button

Numeric Buttons

CLEAR Button

• To open or close the disc tray.

• To select a chapter or title directly.

• To select a track directly.

• To clear the markers.

• To clear the numbers entered incorrectly.

• To cancel the A point for A-B Repeat.

• To clear the markers. (CD)

• To clear the numbers entered incorrectly.

• To cancel the A point for A-B Repeat. (CD)

• To remove status number in program input.

CD/MP3/JPEG/WMA

• To magnify part of the picture (x2). (JPEG)

• To rotate a picture. (JPEG)

MENU Button

TOP MENU Button

ENTER, Cursor Buttons

RETURN Button

SEARCH Buttons

• To call up the menu on a disc.

• To call up the top menu on a disc.

• To move the cursor and determine its position.

SETUP Button

• To return to the previous operation in the setup menu.

• To call up the setup menu. • To call up the setup menu.

SKIP Buttons

• To skip chapters/titles.

• To begin fast forward/reverse search or slow forward/

slow reverse.

STOP Button

PLAY Button

• To stop playback.

• To begin playback.

• To stop playback.

• To begin playback.

STILL/PAUSE Button

• To move the cursor and determine its position.

• To skip tracks.

• To pause playback.

• To advance playback frame by frame.

• To pause playback.

• To call up the FILE LIST. (MP3, JPEG, WMA)

• To return to the first item in the highest hierarchy

of the FILE LIST. (MP3, JPEG, WMA)

• To begin fast forward/reverse search.

(CD, MP3, WMA)

• To set Picture Control.

• To set Black Level on/off.

• To activate the 3D sound (Virtual surround system).

• To set Dialog Speed.

Tour of the Remote Control

Buttons on remote control work in different ways for DVD, Audio CD, MP3, JPEG and WMA: Refer to the following table for correct use.

English

–9–

Page 11

FUNCTIONAL OVERVIEW

The present display state is shown.

• TL./GR.: Title

• TR./CP.: Track or Chapter

To change to the display of a title press the DISPLAY button in the state of Resume.

Lights up when the inserted disc is being play back.

Displays the chapter (title) or track number. In case the chapter (title) or track number is over 100, displays “

- -

”.

Displays the elapsed time of the chapter (title) or track. (The display of 10 hours or more cannot be performed.) Selected HDMI output mode is displayed.

Lights up when playing back in slow mode. (DVD)

Lights up when the disc playback comes to a pause.

Lights up when the progressive scan system is activated. Displays a type of the disc which is on the tray.

• DVD: DVD, MP3, JPEG, WMA on DVD-R/RW

• CD: Audio CD, MP3, JPEG, WMA on CD-R/RW

Lights up when you have selected the audio file such as CD and MP3, WMA on the program screen.

Lights up when the repeat function is on.

Lights up when the ALL repeat function is on. Lights up when the A-B repeat function is on.

Power on

No disc inserted or cannot read

Tray open

Tray closed

Loading the disc

Power off

HDMI output mode (480p/576p) is selected (576p is displayed after 480p)

HDMI output mode (720p) is selected

HDMI output mode (1080i) is selected

HDMI output mode (1080p) is selected

HDMI output mode (OFF) is selected

Program playback is set

Program playback setting group (folder) is selected

Program playback setting ALL CLEAR is selected

Random playback is set

16 feet (5m)

30˚

23 feet (7m) 16 feet (5m)

30˚

Front Panel Display

Displays During Operation

Loading the Batteries

1. Open the battery compartment cover.

2. Insert two “AA” (R6P) batteries, with each one oriented correctly.

3. Close the cover.

Cautions On Batteries

• Use “AA” (R6P) batteries in this remote control unit.

• Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control unit is used.

• If the remote control unit does not operate within a close proximity

of the main unit, replace the batteries with new ones, even if less than a year has passed.

NOTES:

• The front panel display has blinked while setting the program playback.

●●●” is displayed in the front panel display while setting

• “P**the program playback. (“**” is program number, “ number.)

• “A” is displayed in front panel display while selecting the audio file (CD, MP3, WMA).

• “F-***” is displayed in the front panel display while selecting the group (folder). (“***” is group (folder) number.)

• “A-CLEAr” is displayed in the front panel display while selecting ALL CLEAR.

• “SHUFFLE” is displayed in the front panel display while setting the random playback.

●●●” is track

• The included batteries serve only for verifying operation. Replace them with new batteries as soon as possible.

• When inserting the batteries, be careful to do so in the proper direction, following the and marks in the remote control unit’s battery compartment.

• To prevent damage or battery fluid leakage:

•

Do not mix a new battery with an old one.

•

Do not mix two different types of batteries such as alkaline and manganese.

•

Do not short-circuit, disassemble, heat or dispose of batteries in flames.

• Remove the batteries when not planning to use the remote control unit for a long period of time.

• If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries.

Using a Remote Control

Keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote control and the remote sensor on the unit.

• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit.

• Remote control for different devices can interfere with each other. Avoid using remote control for other equipment located close to the unit.

• Replace the batteries when you notice a fall off in the operating range of the remote control.

• The maximum operable ranges from the unit are as follows. Line of sight: approx. 23 feet (7m)

Either side of the center: approx. 16 feet (5m) within 30˚

Above: approx. 16 feet (5m) within 15˚

Below: approx. 10 feet (3m) within 30˚

–10–

Page 12

CONNECTIONS

1 32 54 6 7

Description - Rear Panel

1. AC IN Terminal

Connects the AC cord to supply the power.

2. DIGITAL OUT Jacks (OPTICAL/COAXIAL)

Use either an optical or coaxial digital cable (commercially available) to connect to an AV amplifier with a built-in decoder (AV control center).

3. HDMI OUT Jack

Use a HDMI connection cable (commercially available) to connect to a display with an HDMI compatible port.

4. AUDIO OUT Jacks

Use an audio cable to connect to the Audio input jacks of A/V-compatible TV, wide screen TV or Stereo system.

5. VIDEO OUT Jack

Use a video cable to connect one of the jacks to Video input on your A/V-compatible TV or wide screen TV.

6. COMPONENT VIDEO OUT Jacks

Use a component video cable (commercially available) to connect these jacks if you have a TV with Component Video in jacks. These jacks provide CR/PR, CB/PBand Y video. Along with S-Video, Component Video provides the best picture quality.

7. S-VIDEO OUT Jack

Use an S-Video cable (commercially available) to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higher quality picture.

English

Selecting Progressive Scan (480p/576p or Interlaced 480i/576i) Playback

¡If your TV is compatible with progressive scanning (480p/576p), connect the TV to the COMPONENT VIDEO OUT jacks of

the DVD player and set PROGRESSIVE to ON in the Display setting. Next, set your TV to the progressive scan mode. Refer to page 23 for instructions on changing the Display setting. P.SCAN will appear on the Display of the unit.

¡If your TV is not compatible with progressive scanning, set PROGRESSIVE to OFF (refer to page 23).Make sure that P.SCAN

on the display of the unit lights off.

¡Use a commercially available adaptor if the video input jacks of your TV or monitor is the BNC type.

What is Progressive Scanning?

¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution

than that of traditional (480i/576i) television signals.

–11–

Page 13

CONNECTIONS

The following shows examples of connections commonly used to connect the DVD player to TV and other components. If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks. By hooking up the player to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience with powerful and high-quality surrounding sound of a professional standard which can be heard in movie theaters. Use a commercially available audio optical or coaxial digital cable (not included) for the audio connections.

NOTES:

• Be sure to turn off the power of all components in the system before connecting another component.

• Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the

DVD player.

Connection to an Audio System

Method 1 Method 2

AUDIO

Audio Input Jacks

AV amplifier with a built in decoder

Stereo system

Digital Audio Input Jacks

(AV control center),

Dolby Digital decoder,

DTS decoder,

MD deck or DAT deck

Audio cable

(supplied)

Optical cable

(commercially

available)

Audio Coaxial Digital cable (commercially

available)

DVD

AUDIO OUT

DIGITAL OUT

(analog)

• Method 1 DVD Player + Stereo system

• Method 2 DVD Player + AV amplifier with a built in decoder (AV control center), Dolby Digital decoder, DTS decoder,

MD deck or DAT deck

NOTES (for Method 2 only):

• When using an AV amplifier with a built in decoder (AV control center), Dolby Digital, or DTS decoder as shown in the Method 2, set “DOLBY DIGITAL” or “DTS” to “BITSTREAM” accordingly for audio output in the setup mode (refer to page

24). Set it to “PCM” or “OFF” for the decoder that is not used currently. Playing back a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD deck or DAT deck.

• Set “DOLBY DIGITAL” to “PCM” and “DTS” to “OFF” for audio output in the setup mode for connecting to an MD deck or DAT deck (refer to page 24).

• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a decoder, etc., that is not DTS-compatible.

• When playing a copyright-protected 96kHz PCM DVD, the digital sound will be down sampled at 48kHz, even if you set “LPCM SELECT” to “OFF” (refer to page 24).

Optical cable (commercially available)

• Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 6 inches (15cm) or more when storing them.

• Use a cable which is 9.8 feet (3m) or shorter.

• Insert cable plugs firmly into the connectors when making connections.

• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

–12–

Page 14

CONNECTIONS

S-VIDEO IN

VIDEO IN

CB/PBYCR/PR

COMPONENT

VIDEO IN

Connection to a TV (for video)

Basic audio

Method 1 Method 2

Good

picture

Better

picture

Method 3

Best

picture

Audio Cable

(supplied)

Video Cable

(supplied)

and or or

S-Video

Cable

(commercially

available)

Component

Video

Cable

(commercially

available)

DVD

AUDIO OUT

(analog)

• Method 1 DVD Player + TV with Video Input Jack

• Method 2 DVD Player + TV with S-Video Input Jack

• Method 3 DVD Player + TV with Component Video Input Jacks

NOTES:

• Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due

to the copy protection system.

• S-Video output connector

The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture. If the TV is equipped with a S-Video input connector, we recommend connecting it to this unit’s S-Video output connector using a commercially available S-Video connection cord.

VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT

English

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS

If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details. If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.

NOTE:

• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal

through an RF Modulator.

–13–

Page 15

CONNECTIONS

To HDMI Input Connector

A display equipment with an HDMI compatible port

HDMI cable (commercially available)

DOLBY DIGITAL/DTS Setting

Audio Recording Format

BITSTREAM *1 PCM or OFF

Dolby Digital Dolby Digital

2channel PCM DTS DTS –DVD-Video LPCM 2channel PCM 2channel PCM

Audio CD 2channel PCM 2channel PCM MP3/WMA 2channel PCM 2channel PCM

*1 If the connected equipment is not compatible with HDMI BITSTREAM, signals are output on PCM.

Connection to a TV with an HDMI Compatible Port

A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (HighDefinition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other sources.

C Actual output modes by media

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display equipment (or an AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content Protection System). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV equipment. This player supports HDCP. Please read the operating instructions of your display equipment (or AV amplifier) for more information.

*HDMI: High-Definition Multimedia Interface

NOTES:

• When using an HDMI-incompatible or HDCP-incompatible display equipment, the image will not be viewed properly.

• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this play-

er cannot be controlled by another device via the HDMI connector.

• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may

be limited by the equipment that is connected.

• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with

equipment such as this, audio signals are not output from the HDMI output connector.

• When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI convert-

er cable (commercially available), the signals are output in digital RGB.

“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

Connecting the AC Cord

After you made all necessary connections, connect the AC cord to the AC inlet.Then connect the AC cord to the AC outlet.

–14–

Page 16

DISC PLAYBACK

MULTI PALNTSC

Basic Playback

WMAJPEGMP3CDDVD

Getting started

•Turn on the power of the TV, amplifier and any other components which are connected to the DVD player.

• Make sure the TV and audio receiver (commercially available) are set to the correct channel.

Press the POWER ON button.

• “P-ON” will appear briefly on the display panel.

Press the open disc loading tray.

Place the disc in the tray, with the label facing up.

Press the PLAY button.

• The tray will close automatically,

• When you play back the DVD with a title menu, it may appear

Press the STOP button to stop playback.

NOTES:

•A “prohibited icon” may appear at the

•With DVDs that use some titles for playback program

• During the playback of two layered disc, pictures may

• The operation may vary when you play back DVDs with

HDMI Setup

Press the HDMI button on the front panel to select the HDMI output mode.

The output mode changes as follows every time the HDMI button is pressed.

• The HDMI indicator on the front panel lights up when

480P/576P (Default):

720P : Video output from the HDMI OUT jack at 720p. 1080 : Video output from the HDMI OUT jack at 1080i. 1080P : Video output from the HDMI OUT jack at 1080p. OFF : No video output from the HDMI OUT connector.

NOTES:

• Video and audio signals may distorted temporarily

•

•You can check the HDMI connection status by pressing

• If the TV is not compatible with newly selected HDMI output

• Actual output signals for each HDMI mode vary with

•You cannot select the HDMI output mode when the

OPEN/CLOSE button to

then playback will start from the first chapter or track of the disc. If the playback does not start automatically, press the PLAY button.

on the screen. In this case, refer to “Title Menu” on this page.

top-right corner on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc.

signals, playback may start from the second title, or it may skip these titles.

stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

disc menu. Refer to the manual accompanying the disc for details.

HDMI output mode is on.

720P 1080P1080 OFF480P/576P

Video output from the HDMI OUT jack at 480p/576p.

when switching to/from the HDMI output mode. Use a display equipment with an HDMI-compatible port. The HDMI indicator on the front panel flashes when you select the HDMI output mode but there is no HDMI cable.

DISPLAY button during playback with the HDMI

the output mode (refer to page 20).

mode, the actual output mode will be kept the one before changing the selection. When this occurs, the newly selected mode will appear on the front panel display (see page

10) while the actual output resolution will be indicated by performing the on-screen display as described on page 20.

the compatibility of the connected display device.

setup menu is on the TV screen.

Brightness of the Front Panel Display

Press the DIMMER NTSC/PAL button on the front panel to select the desired brightness of the front panel display. (BRIGHT, DIMMER or OFF)

• The default setting is BRIGHT.

NOTES:

• The brightness of the front panel display can be adjusted from the setup menu. Details are on page 25.

• When you turn on the power next time, the brightness of the front panel display will be as set in setup menu.

TV TYPE

Select a suitable video system according to the format of the TV you connected.

Stop playback.

Press the DIMMER NTSC/PAL button on the front panel more than 3 seconds. The video system will be displayed on the front panel display and TV screen.

Press the video system. The video system will be changed as follows every time the DIMMER NTSC/PAL button is pressed.

• If it is left untouched for more than 5 seconds or any other but-

NOTES:

• If the video system setting does not fit to the TV you con-

• If you turn off the unit, the video system will go back to

DIMMER NTSC/PAL button, and select the desired

MULTI

tons are pressed, the unit will switch back to the normal status.

nected, the picture will be distorted.

the one set for the TV TYPE on the display menu (refer to page 23).

NTSC PAL

General Features

DVD may contain menus to navigate the disc and access special features. Press the appropriate Numeric buttons or use the Cursor buttons (K / L / s / B) to highlight your selection in the DVD main menu and press the ENTER button to confirm.

NOTE:

•

Unless otherwise stated, all operations described in this manual are based on remote control use. Some operations can be carried out using the menu bar on the TV screen.

Disc Menu

Press the MENU button.

• The DVD main menu will appear.

If the feature is not available, symbol may appear on the TV screen.

If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection.

Press the Cursor buttons (K / L / s / B) to select an item, and the ENTER button to confirm the selection.

Title Menu

Press the TOP MENU button.

• The title menu will appear.

If the feature is not available, symbol may appear on the TV screen.

Press the Cursor buttons (K / L / s / B) to select an item, and the

ENTER button to confirm the selection.

• Playback will begin at the selected title.

CALLING UP A MENU SCREEN DURING PLAYBACK

• Press the MENU button to call up the DVD main menu.

• Press the TOP MENU button to call up the title menu.

NOTE:

• Contents of menus and corresponding menu operations may vary among discs. Refer to the manual accompanying the disc for details.

–15–

English

DVD

Page 17

DISC PLAYBACK

Still / Pause

During playback, press the STILL/PAUSE button.

• Playback will pause and sound will be muted.

To continue playback, press the PLAY button.

NOTE:

• On DVDs, set “STILL MODE” to “FIELD” on the display menu if pictures in the pause mode are blurred (refer to page 23).

Resume

During playback, press the STOP button.

• Resume message will appear

on the TV screen.

Press the PLAY button, playback will resume from the point at which playback was stopped.

•To cancel resume, press the

STOP button twice.

Resume ON

Press 'PLAY' to play from here. To play the beginning, press 'STOP' first and then 'PLAY'.

<Example: DVD>

NOTES:

• The resume information be saved even when the power

is turned off.

•For MP3, JPEG or WMA, playback will resume from the

beginning of the current track.

Fast Forward / Reverse Search

During playback, press the h or g button repeatedly to select a desired forward or reverse speed.

•For DVDs, fast forward or reverse search speed is dif-

ferent depending on the disc. The approximate speed is 1 (x2), 2(x8), 3 (x20), 4 (x50), and 5 (x100).

Button

1234

•For Audio CDs, MP3 and WMA, the approximate speed

is 1 (x2), 2 (x8), and 3 (x16).

•For Audio CDs, MP3 and WMA, sound will be output at

any speed of fast forward and reverse search.

To return to normal playback, press the PLAY button.

234

Slow Forward / Slow Reverse

During playback, press the STILL/PAUSE button.

Press the h or g button.

• Slow motion playback will begin and

sound will be muted.

Press the h or g button repeat- edly to select a desired speed.

•

Slow forward or reverse speed is different depending on the disc. Approximate speed is 1 (1/16), 2 (1/8), and 3 (1/2).

To return to normal playback, press the

PLAY button.

NOTE:

• On DVDs, set “STILL MODE” to “FIELD” on the Display

menu if pictures in the slow playback mode are blurred (refer to page 23).

WMAJPEGMP3CDDVD

WMAMP3CDDVD

DVD

Button

Step by Step Playback

During playback, press the STILL/PAUSE button.

• Playback will pause and sound will be muted.

The disc advances frame by frame each time the

To exit step by step playback, press the PLAY button.

STILL/PAUSE button is pressed.

NOTE:

• On DVDs, set “STILL MODE” to “FIELD” on the display menu if pictures in the pause mode are blurred (refer to page 23).

Zoom

This function allows you to enlarge the video image and to pan through the zoomed image.

Press the ZOOM button during playback.

• Playback will continue.

Press the zoom factor: x2, x4 or off.

ZOOM button repeatedly to select a desired

• Only x2 zoom is available for JPEG.

x2 x4

Use the Cursor buttons (K / L / s / B) to move the zoomed picture across the screen.

To exit zoom mode, press the ZOOM button.

NOTES:

•

Zoom function does not work while disc menu is shown.

• x4 zoom is not available on some discs.

•Navigation screen is not available on JPEG.

•

You cannot pan through the zoomed picture on some JPEG files.

Title / Chapter Search

By using the SEARCH MODE button

Press the SEARCH MODE button repeatedly until the chapter search or the title search display appears during playback.

Enter the desired chapter/title number with the Numeric buttons.

By using the SKIP buttons

During playback, press the chapter. Press it repeatedly to skip to subsequent chapters. Press the

rent chapter. Press it repeatedly to go to the previous chapters.

•

Chapter number will appear briefly on the front panel display.

• If the SKIP

is paused, the playback after skipping to the next chapter

will be also paused.

SKIP

HHorGG

button to go back to the beginning of the cur-

SKIP

button to move to the next

button is pressed while the playback

NOTES:

• Depending on the disc being played, the Numeric

buttons can be used to search for a desired chapter by entering the chapter number directly. Refer to the manual accompanying the disc.

• The SKIPHHand GGbuttons are not available when

playback is stopped.

•A disc that does not contain chapters within titles on

DVD, the SKIPHHand

buttons change the titles.

–16–

DVD

JPEGDVD

DVD

/29

HH GG

Page 18

DISC PLAYBACK

Track Search

WMAJPEGMP3CD

There are two ways to begin playback an Audio CD, MP3, JPEG or WMA disc at a specific track.

By using the SEARCH MODE button

Press the SEARCH MODE button.

• The track search display appears.

Within 30 seconds, select a desired track number using the Numeric buttons.

•For the disc with less than 10 tracks, press the track number directly.

•For discs with 10 or more but less than 100 tracks, to play back a single-digit track, press track number (e.g. for track 3, press a double-digit track, press the track number.

•For discs with 100 or more tracks, to play back a single- or a double-digit track, press number (e.g. for track 3, press press 0, 2, 6).To play back a triple-digit track, press the track number.

• Press the CLEAR button to erase the incorrect input.

__/ 15

0 first, then the

0, 3). To play back

0 first, then the track

0, 0, 3, and for track 26,

NOTE:

• The +10 button can also bring up the track search display except for the disc with less than 10 tracks. For such a disc, track search can be done by just pressing the track number.

By using the SKIP buttons

During playback, press the track. Press it repeatedly to skip to subsequent tracks. Press the

SKIP

Press it repeatedly to go to the previous tracks

NOTE:

button to go back to the beginning of the current track.

Tr ack number will appear briefly on the front panel display.

•

• If the SKIPHHor GGbutton is pressed while the playback is paused, the playback will be paused again after skipping to the next track.

• The

SKIPHHand GGbuttons are not available when

playback is stopped.

SKIP

HH GG

button to move to the next

Time Search

CDDVD

Press the SEARCH MODE button until the time search screen appears on the TV screen.

Within 30 seconds, enter a

-:--:--

1:23:45

desired disc time point on the disc with the

• Playback will start at the specified time.

•For Time Search, “0” appears automatically when there is no need to enter a number. For example, “0:0_:_ _” appears in the time search screen if the total time of the disc is less than 10 minutes.

Press the CLEAR button to erase an incorrect input.

Numeric buttons.

Marker Setup Screen

CDDVD

You can use markers to memorize your favorite places on a disc.

Press the SEARCH MODE button repeatedly until the display screen and Markers appear during playback.

Press the Cursor buttons (s or B) to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “_ _ : _ _ : _ _” appears in the display.

1 2 3 4 5 6 7 8 9 10 AC

-- --:--:--

–17–

When the disc reaches the point you want to remember, press the

• The title or track and elapsed playback time will appear in the TV screen.

To return to the Marker later, press the SEARCH MODE

button repeatedly during playback and the

ENTER button.

Cursor buttons (s or B) to choose a desired

marker, then press the

Press the SEARCH MODE or RETURN button to exit.

ENTER button.

NOTES:

• Opening the disc tray, turning off the power or selecting AC at step and pressing the ENTER button will erase all Markers.

•To clear a marker, using the position the cursor on to the marker number to be cleared and press the CLEAR button.

•You can mark up to 10 points.

Cursor buttons (s or B),

Repeat

• The REPEAT button is available only during playback.

REPEAT TITLE / CHAPTER

DVD

To activate Repeat function, press the REPEAT button during playback.

• The repeat mode changes as described below every time you press the button.

CHAPTER TITLEOFF

off)

(repeat

(current chapter repeat) (current title repeat)

NOTES:

• The Repeat Title/Chapter setting will be cleared when moving to other title or chapter.

• Repeat playback does not function during A-B repeat playback.

• Repeat Title/Chapter is not available with some scenes.

REPEAT TRACK / GROUP / ALL

To activate Repeat function, press the REPEAT button during playback.

• The repeat mode changes as described below every time you press the button.

TRACK ALLOFF

(repeat off)

(current track repeat) (entire disc repeat)

NOTES:

• In the track repeat, the repeat setting will be cleared when moving to other track.

• Repeat playback does not function during A-B repeat playback.

WMAJPEGMP3

OFF

(repeat

off)

TRACK ALL

(current track

repeat)

NOTE:

• In the track or group repeat, the repeat setting will be cleared when moving to other track or group.

GROUP

(current folder

repeat)

(

entire disc

repeat)

English

Page 19

DISC PLAYBACK

A-B REPEAT

Press the A-B REPEAT button at your chosen starting point.

A -

• A- appears briefly on the

TV screen.

Press the A-B REPEAT button

A - B

again at your chosen end point.

• A-B appears briefly on the TV screen, and the

repeat sequence begins.

To exit the sequence, press the

A-B REPEAT button.

OFF

NOTES:

• The A-B Repeat section can only be set within the current title (for DVD), or current track (for Audio CD).

• A-B Repeat is not available with some scenes on DVD.

•To cancel the A point which was set, press the CLEAR button.

• A-B Repeat playback does not function during title, chapter, track or all repeat playback.

Program Playback

This function allows you to program a playback order of Audio CD, MP3, JPEG or WMA in a desired sequence.

In stop mode, press the MODE button.

• The program screen will appear.

Press the Cursor buttons (▲ or ▼) to select a track, then press the

•

Press the CLEAR button to erase

ENTER button.

PROGRAM

CD-DA TOTAL 0:03:30

1 3:30

2 4:30

3 5:00

4 3:10

5 5:10

6 1:30

7 2:30

1/2

1 3:30

the most recently entered track.

Press the PLAY button to start programmed playback.

WMAJPEGMP3

In stop mode, press the MODE button.

• The program screen will appear.

Press the Cursor buttons (K or L) to select a group, then press

the ENTER button.

•A track selection screen appears.

Press the Cursor buttons (K or L) to select a track, then press

the ENTER button to save it in a program.

• Press the CLEAR button to erase the most recently entered track.

• The programmed track is displayed in the right-hand screen.

• If the entire program cannot be displayed on the screen, “

• Pressing the will show a list of folders that belong to the hierarchy which is one-level higher than the currently selected folder.

Press the PLAY button to start programmed playback.

• Press the RETURN button, and the stop screen will show up with the program contents in memory.

L” appears.

Cursor button (s)

PROGRAM

MY COLLECTION

ABC DEF GHI

ALL CLEAR

1/1

ABC

PROGRAM

ABC

DEF GHI JKL MNO

ALL CLEAR

2/2

DEF

PROGRAM

ABC

DEF GHI JKL MNO

ALL CLEAR

2/2

DEF

CDDVD

1 3:30

1/1

DEF

1/1

NOTES:

• Press the STOP button once and then the PLAY button

again, playback will restart from the point where the STOP button was pressed. (Program continued.)

• Press the STOP button twice and then the PLAY button

again, playback will restart from the first track in the usual way. Your program is still stored until either the disc tray is open or power is turned off.

• Up to 99 tracks can be entered.

•

To erase tracks in the program all together, select ALL CLEAR at the bottom of the list at step . And, “A-CLEAr”

is displayed on the front panel display at that time.

•To repeat the current track in the program, press the

REPEAT button repeatedly until TRACK appears during playback. To repeat the entire program press the REPEAT button repeatedly until ALL appears dur- ing playback.

• If eight or more tracks were set in a program, use the

SKIP

button to see all the tracks.

• When selecting the folder:

–Press the Cursor button (B) when you want to go to

the next hierarchy.

–

Press the Cursor button ({) when you want to go back to the previous hierarchy (except for the top hierarchy).

•Even if an inserted disc contains mixed MP3, JPEG and WMA files, Program function allows 99 tracks in combination of MP3, JPEG and WMA files.

• The front panel display has blinked while setting the program playback.

Random Playback

This function shuffles the playback order of tracks instead of playback in the original sequence.

In stop mode, press the

RANDOM

CD-DA TOTAL 0:45:55

RANDOM button.

• The random screen will appear.

Press the PLAY button to start random playback.

NOTES:

<Example: CD>

•To repeat the current track in the random selection, press the REPEAT button repeatedly until TRACK appears during playback. To repeat the entire random selection press the REPEAT button repeatedly until

ALL appears during playback.

•You cannot go back to the previous track during random playback.

•For a disc containing mixed MP3, JPEG and WMA files, random playback of those files will be performed.

• “SHUFFLE” is displayed on the front panel display at

step .

MP3 / JPEG / WMA Playback

When a DVD-R/RW or CD-R/RW disc with MP3, JPEG or WMA files is inserted in the DVD player, the file list will appear automatically on the TV screen. The number of tracks is also displayed on the front panel.

Press the

Cursor buttons (K or L) to select the desired

group (folder) or track.

•To return to the previous screen, press the Cursor but- ton (s).

• If a group (folder) is selected, press the Cursor button (B) or ENTER button to go on to the track selection screen. Press the Cursor buttons (K or L) to choose a track, then press the PLAY or ENTER button.

• If a track is selected, press the PLAY or ENTER button to start playing back tracks.The selected track and the subsequent tracks will be played back.

–18–

WMAJPEGMP3CD

RANDOM PROGRAM

--no indication--

WMAJPEGMP3

Page 20

DISC PLAYBACK

Picture1 Picture2 Picture3

Picture4

Current track number / the number of total tracks

Picture5 Picture6

1/32

• When selecting the folders

–Press the Cursor button (BB) when you want to go to

the next hierarchy.

–Press the Cursor button ({) when you want to go

back to the previous hierarchy (except for the top hierarchy).

• Press the TOP MENU button to return to the first item.

Press the STOP button to stop playback.

NOTES:

• Folders are known as Groups; files are known as Tracks.

• A symbol of is shown on the top of the group name.

• A symbol of is shown on the top of MP3 files.

• A symbol of is shown on the top of JPEG files.

• A symbol of is shown on the top of WMA files.

• Maximum of 255 folders can be recognized.

• Maximum of 999 files can be recognized.

• Up to 8 hierarchies can be recognized.

• If the track extends beyond the scope of screen, a down arrow “L” appears, indicating that the user can view another part on the previous page. The current page number and the number of total pages are shown on the left of the down arrow “

• If no MP3, JPEG or WMA files are found in the group, the group is not displayed.

• The DVD player can reproduce data recorded as per ISO 9660 Level 1, Level 2 or Joliet on the disc.

• It can also run a disc on which data is recorded in a multi-session.

• For more details of recording systems, refer to the instruction manual for the DVD-R/RW or CD-R/RW drive or the writing software.

• For MP3 and WMA files recorded in Variable Bit Rate (VBR), the unit may not display the actual elapsed time.

This player recommends the use of files recorded at the following specifications:

Applicable MP3 file Remarks

Sampling frequency

Type

Applicable JPEG file Remarks

Size of image

Applicable WMA file Remarks Sampling

frequency

Bit rate 48–192kbps

Type WMA version 9

44.1kHz 48kHz

MPEG1 audio layer 3

Upper limit: 6300x5100 dots Lower limit: 32x32 dots

44.1kHz 48kHz

L”.

• It is prohibited to record MP3 sound on a digital device when the connection is made digitally.

• MP3 files recorded at fixed bit rate of 32 kbps or higher are recommended.

• A JPEG image that extends beyond the screen is reduced so that it will be displayed within the screen.

• Those frequencies are applicable to WMA version 9.

• Ensure that the copyright function is set to off when preparing a WMA disc.

• A prohibition “disable” symbol will appear if the user attempts to run a non-reproducible file such as copyright-protected.

• Recorded in multi-channel format cannot be played back.

Information on MP3, JPEG and WMA discs

•

This DVD player can play back images and sounds from data recorded in MP3 and JPEG formats on DVD-R/RW and CDR/RW discs.

•

A file with an extension of “.mp3 (MP3)” is called an MP3 file.

•A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is called a JPEG file. The DVD player can run an image file conforming to the Exif specification. Exif is a file format, Exchangeable Image File format established by Japanese Electronic Industry Development Association (JEIDA).

•

A file with an extension of “.wma (WMA)” is called a WMA file.

• Files whose extension is other than “.mp3 (MP3)”, “.jpg (JPG)” and “.jpeg (JPEG)” or “.wma (WMA)” will not be listed on the MP3, JPEG or WMA menu.

• If the file is not recorded in MP3, JPEG or WMA format, noise may be produced even if the file extension is either “.mp3 (MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” or “.wma (WMA)”.

•

The name of group and track can be displayed up to 25 characters. Unrecognizable characters will be replaced with asterisks. The ninth and deeper hierarchies cannot be displayed.

• Unplayable groups or tracks may be displayed depending on the recording conditions.

• If the TOP MENU button is pressed when a file list is displayed, the first item will be highlighted.

Kodak Picture CD

The DVD player can also run JPEG files stored on Kodak Picture CDs.You can enjoy picture images on the television set by playing back the Picture CDs. This unit confirm to ver. 7.0 of Kodak Picture CD. For details of Kodak Picture CD, contact a shop that provide developing service of Kodak Inc.

When Kodak Picture CD is inserted in the DVD Player, Kodak Picture CD menu appear automatically on the TV screen.

• If all menu items cannot be displayed on the screen scope, “G” appears at the right bottom of the screen, indicating that the user can view remaining items on the next page. “H” appears, it indicates that the user can view other items on the previous page. The track number of the currently highlighted item and the total tracks are shown at the center bottom of the screen.

• If “G” is shown at the right bottom, use the SKIP G button to view the next page. If “H” is shown at the left bottom, use the SKIP H button to view the previous page.

• It may take some time until all menu items are displayed on the menu screen.

Press the Cursor buttons (K / L / s / B), select a desired track to be played back, then press the PLAY or ENTER button.

•If a Kodak Picture CD file is selected, an image will be played back from the selected track and go to the next one in turn.

Press the STOP button, to stop playback.

NOTES on JPEG and Kodak Picture CD:

•A track is displayed for 5 or 10 seconds and then the next track is displayed.

•Every press on the ANGLE button will turn the image clockwise by 90 degrees when an image is displayed.

•To change the size of the playback image, press the MODE button twice. The size change mode appears on top of the TV screen during playback. Then press the Cursor buttons (s or B) or ENTER button to switch between NORMAL (100%) and SMALL (95%).

–19–

English

Page 21

DISC PLAYBACK

• Progressive JPEGs (JPEG files saved in the progressive format) will not be played back on this DVD player.

• High resolution JPEG files take longer to be displayed.

• The size change mode may have no effect on some files (e.g. files with a small picture size).

• In stop mode, press the MENU button, Kodak Picture CD menu appears.

NOTES on WMA:

• The DVD player can reproduce data recorded as ISO 9660 level 2 with 31 characters file name included punctuation marks. The name of file can be displayed up to 25 characters.

• Maximum of 8 subfolders can be recognized.

• It can also be displayed tag information of WMA at least 64 characters.

•A file with an extension of Joliet as Unicode format in up to 64 characters can be recognized.

•

This unit cannot play back copyright protected WMA files.

Changing the On-Screen Display

You can check information about the current disc by pressing the DISPLAY button on the remote control.

DVD

Press the DISPLAY button during playback.

• Current chapter number/total

9/49 0:00:00 -0:03:30

chapters, elapsed time and remaining time of the current chapter, and current playback status will be displayed.

Press the DISPLAY button again.

• Current title number/total titles, elapsed time and remaining time of the current title, and current playback status will be displayed.

Press the DISPLAY button for the third time.

IIIIIII

T L1

• The bit rate (the amount of video data currently being read) and current playback status will be displayed.

• Current repeat setting appears on the display bar only when the repeat setting is active.

(C:Chapter repeat/ T: Title repeat/A B: A-B repeat)

• If you are playing back a two-layered disc, the layer number will also be displayed. (L0: Layer 0 is played back. L1: Layer 1 is played back.)

Press the DISPLAY button again.

• Current HDMI status will be displayed during the HDMI output mode. (Refer to NOTE FOR HDMI DISPLAY on this page.)

Press the DISPLAY button again to exit.

Press the DISPLAY button during playback.

• Current track number/total tracks, elapsed time and remaining time of the current track, and current playback status will be displayed.

• Current repeat setting appears on the display bar only when the Repeat setting is active. (T:Track repeat/ A: All tracks repeat/A B: A-B repeat)

Press the DISPLAY button again.

• Current track number/total tracks, elapsed time and remaining time of the entire disc, and current playback status will be displayed.

• Current repeat setting appears on the display bar only when the Repeat setting is active. (T:Track repeat/ A: All tracks repeat/A B: A-B repeat)

• When you are playing back a disc in program or random mode, PROGRAM (or RANDOM) will be displayed.

Press the DISPLAY button again.

• During program or random playback, each playback status will be displayed when you press the DISPLAY button. Then press the DISPLAY button again.

• Current HDMI status will be displayed during the HDMI output mode. Refer to NOTE FOR HDMI DISPLAY on this page.

Press the DISPLAY button again to exit.

Press the DISPLAY button during playback.

• Current file name will be displayed.

Press the DISPLAY button.

• Current track number/total tracks and elapsed time (MP3) will be displayed.

• Current repeat setting appears only when the Repeat setting is active. (T:Track repeat/ A: All (disc) repeat/ G: Group repeat).

• When you are playing back a disc with MP3 or JPEG files in program or random mode, PROGRAM (or RANDOM) will be displayed.

Press the DISPLAY button again.

• During program or random playback, each playback status will be displayed when you press the button. Then press the DISPLAY button to exit.

Press the DISPLAY button again.

•

Current HDMI status will be displayed during the HDMI output mode. (Refer to NOTE FOR HDMI DISPLAY on this page.)

Press the DISPLAY button again to exit.

Press the DISPLAY button during playback.

•

Current file name will be displayed.

Press the DISPLAY button again.

• Title name based on tag information of currently playedback file will be displayed.

Press the DISPLAY button for the third time.

•Artist name based on tag information of currently playedback file will be displayed.

Press the DISPLAY button again.

• Current track number/total tracks and elapsed time will be displayed.

• Current repeat setting appears only when the Repeat setting is active. (T:Track repeat/ A: All (disc) repeat/ G: Group (folder) repeat).

•

When you are playing back a disc in program or random mode, PROGRAM (or RANDOM) will be displayed.

Press the DISPLAY button again.

• During program or random playback, each playback status will be displayed when you press the button. Then press the DISPLAY button to exit.

Press the DISPLAY button again.

•

Current HDMI status will be displayed during the HDMI output mode. (Refer to NOTE FOR HDMI DISPLAY on this page.)

Press the DISPLAY button again to exit.

NOTE:

• If the file does not contain tag information, NOT AVAILABLE will be displayed.

NOTE FOR HDMI DISPLAY:

• The displayed HDMI status are as follows:

1. Information for image out-

put/Resolution of image

2. Sound output format

3. Maximum number of audio channels that can be

accepted by the connected equipment

–20–

JPEGMP3

TRACK 01

<Example: MP3>

TR 1/36 0:01:15

DISPLAY

WMA

TRACK 01

TITLE NAME

ARTIST NAME

TR 1/36 0:01:15

DISPLAY

VIDEO INFO. : AUDIO INFO. : MAX CHANNEL

YCbCr/1080i BITSTREAM

: 2ch

Page 22

DISC PLAYBACK

Slide Show Mode

JPEG

You can switch to the slide show mode during playback.

Press the MODE button during playback.

• The slide show mode screen will appear.

•You cannot change to the slide show mode in stop mode or from the file list screen or the Picture CD menu screen.

Press the ENTER button.

• The slide show mode will change. CUT IN/OUT: The entire image appears in one time. FADE IN/OUT:

Press the MODE button to exit.

The image appears and disappears gradually.

Dialog Speed

DVD

Available only on discs recorded in the Dolby Digital format, Dialog Speed plays back in slightly faster or slower speed while keeping the sound quality as in the normal playback.

During playback, press the MODE button repeatedly until the Dialog Speed setting appears.

•

“OFF” appears on the TV screen.

Press the ENTER button or the Cursor buttons (s

OFF

or B) to switch among (x1.3), (x0.8) and OFF.

: Plays back approximately at 0.8 times of nor-

mal playback.

: Plays back approximately at 1.3 times of nor-

mal playback.

To return to normal playback, press the

NOTES:

•Every time you press the STOP button, the setting will be turned OFF.

• Subtitle can be viewed during this function.

• Picture Control, Black Level and Audio Language setting cannot be changed while using this mode.

• Virtual Surround does not function while using this mode.

• This feature may not work at some point on a disc.

• When using digital audio connection (COAXIAL, OPTICAL or HDMI), the LPCM sound (2 channel) will be output.

• When using digital audio connection, only the Dolby Digital sound will be available.

• When using the Dialog Speed function with Multi-channel digital outputting, the analog output sound will be fixed at 2 channel.

PLAY button.

Audio Language

DVD

The DVD player allows you to select an audio language (if multiple languages are available) during DVD disc playback.

Press the AUDIO button during playback.

Press the desired language.

AUDIO button repeatedly to select your

1.ENG Dolby D 3/2.1ch 48k/3

HELLO

2.FRE Dolby D 3/2.1ch 48k/3

NOTES:

• The sound mode cannot be changed during playback of discs not recorded in double sound.

• Some discs allow to change audio language setting on the disc menu. (Operation varies between discs. Refer to the manual accompanying the disc.)

• Pressing the DVDs with multiple audio languages (e.g. DVDs which allow to change audio language setting on the disc menu).

• If you choose a language that has a three-letter language code, the code will be displayed every time you change the Audio Language setting. If you choose any other languages, ‘---’ will be displayed instead (refer to page 25).

•Audio Language selection cannot be made during Dialog Speed.

• DTS sound is output only from the digital audio outputs.

• If the disc has no audio language, ‘NOT AVAILABLE’ will be displayed.

AUDIO button may not work on some

Subtitle Language

DVD

The DVD player allows you to select a subtitle language (if multiple languages are available) during DVD playback.

Press the SUBTITLE button during playback.

Press the your desired subtitle language.

• The selected language will be displayed on the display bar at the top of the screen.

• Press the subtitles during playback.

To turn off subtitles, press the SUBTITLE button repeatedly until OFF appears.

NOTES:

• Some discs allow subtitle language setting on the disc menu. (Operation varies between discs. Refer to the manual accompanying the disc.)

• Pressing the DVDs with multiple subtitle languages (e.g. DVDs which allow subtitle language setting on the disc menu).

• If your desired language is not shown after pressing the SUBTITLE button several times, the disc does not have subtitles in that language.

• If you choose a language that has a three-letter language code, the code will be displayed every time you change the Subtitle Language setting. If you choose any other languages, ‘---’ will be displayed instead (refer to page 25).

• If the disc has no subtitle language, ‘NOT AVAILABLE’ will be displayed.

SUBTITLE button repeatedly to select

Cursor buttons (s or B) to turn on or off

1.ENG/6

Subtitle 1

2.FRE/6

OFF

SUBTITLE button may not work on some

Subtitle 2

OFF

English

3.JPN Dolby D 3/2.1ch 48k/3

Bon jour

–21–

Page 23

DISC PLAYBACK

Camera Angle

DVD

Some DVD discs contain scenes which have been shot simultaneously from various angles.You can change the camera angle when the ( ) mark appears on the screen.

Press the ANGLE button during playback.

• The selected angle will be displayed on the display bar at the top of the screen.

Press the ANGLE button repeatedly to select your desired angle.

1 / 8

Angle 1

2 / 8

8 / 8

Angle 2

Angle 8

NOTE:

• If the “ANGLE ICON” setting is “OFF” in the Others menu, the ( ) will not appear (refer to page 25).

Picture Control

DVD

Picture Control adjusts Brightness, Contrast, Color, Gamma Correction and Sharpness of the specific display.

During playback, press the

MODE button.

Press the (

K or L) to switch among items.

Press the ENTER button or the Cursor buttons (s or B)

Cursor buttons

BRIGHTNESS

s +1B

to adjust the selected item to a desired level.

• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be selected.

To return to normal playback, press the RETURN button.

NOTES:

• The default settings for all items in Picture Control are “0”.

• The setting display will disappear in 10 seconds of no use.

• This function cannot be used during Dialog Speed (refer to page 21).

• If you return all items to the default settings, select “INITIALIZE” at step .

Stereo Sound Mode

Press the AUDIO button repeatedly during playback to select your desired sound mode.

STEREO - both right and left channels are active (stereo) L-ch - only left channel is active R-ch - only right channel is active

STEREO

Both right and left channels are active (stereo).

Virtual Surround

WMAMP3CDDVD

You can enjoy stereo phonic virtual space through your existing 2 channel stereo system.

During playback, press the MODE button repeatedly until

OFF

the Virtual Surround setting appears.

Press the

ENTER button to set it 1(Natural effect),

2(Emphasized effect) or OFF.

Press the

RETURN button to exit.

NOTES:

• Select Virtual Surround OFF or lower the volume if the sound is distorted.

• Virtual Surround will not be effective if the sound mode is set to something other than “STEREO” (for Audio CD playback only).

• This function cannot be used during Dialog Speed (refer to page 21).

Black Level Setting

DVD

Adjust the Black Level Setting to make the black parts of the picture as bright as you prefer.

During playback, press the MODE button repeatedly until Black Level setting appears.

Press the ENTER button to switch ON/OFF.

ON (Default) : Makes the dark parts brighter. OFF : Shows the original picture as recorded.

Press the RETURN button to exit.

NOTE:

• This function cannot be used during Dialog Speed (refer to page 21).

L-ch

R-ch

NOTE:

• Stereo sound mode will not be changed when playing DTS CD.

Only the left channel is active.

Only the right channel is active.

–22–

Page 24

DVD SETUP

In Setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode (refer to pages 23-25) are available. QUICK mode consists of the setting menus frequently used, and they are accompanied with mark.

QUICK

You can make all settings in CUSTOM mode.

Language Setting

Language options are not available with some discs.

Press the SETUP button in stop mode.

Press the Cursor buttons (s or B) to select CUSTOM, then press the ENTER button.

• The custom mode will appear.

Press the Cursor buttons (s or B) to select LANGUAGE, then press the ENTER button to confirm.

Press the Cursor buttons (K or L) to select an item, then press the ENTER button.

DIALOG

SUBTITLE

DISC MENU

OSD

(Default : ORIGINAL)

• Sets the audio language.

(Default : OFF)

• Sets the subtitle language.

• Sets the language for DVD Menu.

(Default : ENGLISH)

QUICK

LANGUAGE

DIALOG ORIGINAL SUBTITLE OFF DISC MENU ENGLISH OSD ENGLISH

• Sets the language for the On-Screen display.

Press the Cursor buttons (K or L) to select a setting, then press the ENTER button.

• If OTHER is selected in the DIALOG, SUBTITLE or DISC MENU, press four-digit number to enter the code for the desired language (refer to the language code list on page 25).

• Only the languages supported by the disc can be selected.

Press the SETUP button to exit and activate the new settings.

NOTE:

• Language Setting for DIALOG and SUBTITLE may not be available with some discs. Then use the AUDIO and

SUBTITLE buttons. Details are on page 21.

Display Setting

You can change certain aspects of the DVD display screens, still mode setting, Progressive and HDMI settings.

Press the

Press the Cursor buttons (s or B) to select CUSTOM, then press the ENTER button.

•

Press the Cursor buttons (s or B) to select DISPLAY, then press the

ENTER button to confirm.

Press the Cursor buttons (K or L) to select an item, then press the

ENTER button.

TV ASPECT

• Press the Cursor buttons (K or

• Select 4:3 LETTER BOX for a

• Select 4:3 PAN & SCAN for a full

• Select 16:9 WIDE if a wide-screen TV is connected to the

• Select 4:3 SQUEEZE when the TV screen is too large hor-

STILL MODE

• Press the Cursor buttons (K or

• This function allows you to adjust

• An individual picture on TV screen is called as “frame”,

SETUP button in stop mode.

The custom mode will appear.

DISPLAY

TV ASPECT

4:3 LETTER BOX STILL MODE AUTO TV TYPE MULTI PROGRESSIVE OFF PROG.MODE AUTO1 HDMI SELECT YCbCr HDMI PICTURE NORMAL

(Default : 4:3 LETTER BOX)

QUICK

L) for an item selection, then press the

black bars appears on top and bottom of the screen.

ENTER button.

DISPLAY TV ASPECT

4:3 LETTER BOX 4:3 PAN & SCAN

:9 WIDE

4:3 SQUEEZE

height picture with both sides trimmed.

DVD player.

izontally at 16:9 WIDE setting and when it is impossible to adjust the screen size using the TV’s controls.

L) for an item selection (AUTO, FIELD, or FRAME), then press the ENTER button.

picture resolution and quality in still mode.

which consists of two separate images called as “field”. Some pictures may be blurred at the AUTO setting in still mode due to their data characteristics.

(Default : AUTO)

DISPLAY STILL MODE

AUTO FIELD FRAME

•AUTO: Automatically selects the best resolution setting (FRAME or FIELD) based on the data characteristics of the pictures.

• FIELD: Select FIELD when the pictures are still unstable even if AUTO is selected. FIELD stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data.

• FRAME:

Select FRAME to display relatively motionless pictures in higher resolution. FRAME improves the picture quality, although it may unstabilize the pictures due to simultaneous output of two field data.

TV TYPE (Default: MULTI)

•

Press the Cursor buttons ( to select a setting, then press the ENTER button.

•

Select a video system setting

K or L)

DISPLAY TV TYPE

NTSC PAL MULTI

between MULTI, NTSC and PAL.

•

NTSC: Select this when your TV’s

video format is NTSC. If NTSC is selected, output format is fixed to NTSC.

•

PAL: Select this when your TV’s video format is PAL. If

PAL is selected, output format is fixed to PAL.

•

MULTI: Automatically selects the suitable video out system

(PAL/NTSC) according to the format of the inserted disc.

- For the discs recorded with NTSC system, the NTSC signal will be output and pictures of the discs can be viewed on an NTSC or Multi system TV.

- For the discs recorded with PAL system, the PAL signal will be output and pictures of the discs can be viewed on a PAL system TV.

NOTE:

•

If the AC power cord is disconnected while the unit is turned on, the video format of opening screen is altered. To keep the format, turn the unit off before unplugging the AC power cord.

PROGRESSIVE (Default: OFF)

•

Press the Cursor buttons (K or L) for set PROGRESSIVE to ON or OFF, then press the

ENTER button.

• The setting will be effective when you exit the setup screen by pressing When PROGRESSIVE is ON,

•

SETUP.

P.SCAN appears on the DVD player’s display after you exit the setup screen.

•

Refer to page 11 for more details.

PROG.MODE (Default: AUTO1)

• Press the Cursor buttons (K or L) to select a setting (AUTO1, AUTO2, or VIDEO), then press the ENTER button.

•For HDMI or Component Video connection, this function allows you to select the image output, depending on the base material (video or film) of the recorded DVD images, when PROGRESSIVE is ON.

•AUTO1: Automatically selects the best image output

(AUTO2 or VIDEO) based on the information of data stream.

•AUTO2: A combination of the top and bottom fields is

output as one-frame image.

• VIDEO: Either of top or bottom field is output for one-frame

image.

QUICK

DISPLAY

TV ASPECT STILL MODE AUTO

TV TYPE MULTI

PROGRESSIVE OFF PROG.MODE AUTO1

HDMI SELECT YCbCr HDMI PICTURE NORMAL

DISPLAY PROG. MODE

AUTO1 AUTO2 VIDEO

–23–

English

4:3 LETTER BOX

Page 25

DVD SETUP

HDMI SELECT (Default: YCbCr)

• Select an HDMI output mode between YCbCr and RGB.

• When the connected equipment is not compatible with YCbCr, HDMI signal is output as RGB regardless of the setting.

DISPLAY

TV ASPECT

4:3 LETTER BOX STILL MODE AUTO TV TYPE MULTI PROGRESSIVE OFF PROG.MODE AUTO1 HDMI SELECT YCbCr HDMI PICTURE NORMAL

HDMI PICTURE (Default: NORMAL)

• Select a HDMI picture mode between NORMAL and ENHANCED.

• Select ENHANCED if the blackwhite contrast is not clear.

• This setting is effective only for HDMI RGB output.

Press the SETUP button to exit and activate the new settings.

NOTE:

• Be sure to press the SETUP button, or the setting will not work.

DISPLAY

TV ASPECT

4:3 LETTER BOX STILL MODE AUTO TV TYPE MULTI PROGRESSIVE OFF PROG.MODE AUTO1 HDMI SELECT YCbCr HDMI PICTURE NORMAL

Audio Setting

You can change some Audio settings. It only affects during the playback of DVD discs.

Press the

Press the CUSTOM, then press the ENTER button.

• The custom mode will appear.

Press the to select AUDIO, then the ENTER button to confirm.

Press the Cursor buttons (K or L) button to select an item, then press the ENTER button.

DRC (Dynamic Range Control) (Default: ON)

• DRC function compresses the range of sound volume.

• DRC function is available only on the discs that are recorded in the Dolby Digital format.

LPCM SELECT

• Set to ON when outputting in 48kHz.

• This function is available only on digital outputting of a disc recorded in 96kHz.

• When the HDMI sound is output, the setting is disregarded.

When playing disc with copyright protection

• The sound will be down sampled at 48kHz, even if you set to OFF.

DOLBY DIGITAL (Default: BITSTREAM)

• Set to BITSTREAM when the player is connected to a Dolby Digital decoder.

• This function is effective only for the COAXIAL, OPTICAL and HDMI connections.

BITSTREAM:

PCM: Convert Dolby Digital to PCM.

SETUP button in stop mode. Cursor buttons (s or B) to select

Cursor buttons (s or B)

AUDIO

DRC ON LPCM SELECT OFF DOLBY DIGITAL BITSTREAM DTS BITSTREAM AUDIO MODE HDMI

AUDIO

DRC

ON LPCM SELECT OFF DOLBY DIGITAL BITSTREAM DTS BITSTREAM

(Default: OFF)

AUDIO MODE HDMI

AUDIO

DRC

ON LPCM SELECT OFF DOLBY DIGITAL BITSTREAM DTS BITSTREAM

AUDIO MODE HDMI

QUICK

AUDIO

DRC

ON LPCM SELECT OFF DOLBY DIGITAL BITSTREAM DTS BITSTREAM

AUDIO MODE HDMI

• For HDMI connection, if the connected equipment is not compatible with the Dolby Digital BITSTREAM, the signals are output as PCM regardless of the setting.

DTS (Default: BITSTREAM)

• Set to BITSTREAM when the unit is connected to a DTS decoder.

BITSTREAM:

DTS signals are output as Bitstream.

•For HDMI connection, if the connected equipment is not compatible with the DTS Bitstream, the signals are not output regardless of the setting.

OFF: No DTS sound will be output.

• DTS sound is output only from digital audio outputs.

AUDIO MODE

• Set to HDMI when outputting the HDMI sound.

• Set to ANALOG when not outputting the HDMI sound.

Press the SETUP button to exit

(Default: HDMI)

QUICK

AUDIO

DRC

ON LPCM SELECT OFF DOLBY DIGITAL BITSTREAM DTS BITSTREAM

AUDIO MODE HDMI

AUDIO

DRC

ON LPCM SELECT OFF DOLBY DIGITAL BITSTREAM DTS BITSTREAM

AUDIO MODE HDMI

and activate the new settings.

Ratings Control

Ratings Control allows you to set a limit, which prevents your children from viewing inappropriate materials on DVDs.A fourdigit password that you establish will give you the control.

RATING LEVEL

You can set a viewing limit through Rating Level. Playback of the discs will stop if the disc’s general rating exceeds the limit you set.

Press the

Press the then press the

Press the Cursor buttons (s or B) to select RATINGS, then press the

ENTER button.

Press the your four-digit password.

• When doing this for the first time,

• If you forget the password, press

Press the Cursor buttons (K or L) to select RATING LEVEL, then press the ENTER button.

Press the Cursor buttons (K or L) to select a desired level, then press the ENTER button.

Press the activate the new settings.

NOTES:

• This function may not work on some

• The resume information will be cleared if you change the

To Change the Password:

1) Follow the steps to above.

2) Press the CHANGE, then press the

3) Enter a new four-digit password, then press the ENTER button.

4) Press the

Press 4, 7, 3, 7 at step .

•Password will be cleared and rating level will be set to ALL.

Repeat steps to to re-establish the parental lock.

SETUP button in stop mode. Cursor buttons (s or B) to select CUSTOM,

ENTER button.

RATINGS

Numeric buttons to enter

enter any four-digit number by pressing the Numeric buttons (except for 4737), then press the ENTER button.That number will be used as the password from the second time onward. Record your password in case you forget it.

password will be cleared and rating levels will be set to ALL. Enter a new four-digit password, then press the ENTER button.

4, 7, 3, 7. The original

SETUP button to exit and

DVDs. Be sure if the RATINGS operates in the way you have set.

PASSWORD

Please enter a 4-digit password.

RATINGS

RATING LEVEL ALL PASSWORD CHANGE

RATINGS RATING LEVEL

ALL 8 7 [NC-17] 6 [R] 5 4 [PG13] 3 [PG]

parental level when the resume information is on.

Cursor buttons (K or L) to select PASSWORD

ENTER button.

SETUP button to exit.

IF YOU FORGET THE PASSWORD

742

–24–

Page 26

DVD SETUP

CONTROL LEVELS

• ALL

Parental lock is canceled.

• Level 8

DVD software of any grade (adult/general/children) can be played back.

• Levels 7 to 2

Only DVD software intended for general use and children can be played back.

• Level 1

Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.

Others Setting

This function allows you to adjust Angle Icon availability, Auto Power off, brightness of the player’s display panel and slide show mode.

Press the SETUP button in stop mode.

Press the to select CUSTOM, then press ENTER.

• The custom mode will appear.

Press the Cursor buttons (s or B) to select Other, then press the

ENTER button to confirm.

Press the to select an item, then press

ANGLE ICON

• Press the ENTER button repeated-

Cursor buttons (s or B)

Cursor buttons (K or L)

(Default : ON)

ly to turn ON or OFF.

ENTER.

OTHERS

ANGLE ICON ON AUTO POWER OFF ON PANEL DISPLAY BRIGHT SLIDE SHOW 5sec

OTHERS

ANGLE ICON ON AUTO POWER OFF ON PANEL DISPLAY BRIGHT SLIDE SHOW 5sec

AUTO POWER OFF

• Press the ENTER button repeated-

ly to turn ON or OFF.

• It will turn off the DVD player automatically after 30 minutes of no use.

(Default : ON)

OTHERS

ANGLE ICON ON AUTO POWER OFF ON PANEL DISPLAY BRIGHT SLIDE SHOW 5sec

PANEL DISPLAY (Default : BRIGHT)

• Press the Cursor buttons (K or L) to select a setting (BRIGHT, DIMMER and AUTO), then press the ENTER button.

• When AUTO is selected, the display dims only during playback.

SLIDE SHOW

• This adjusts the playback speed of the JPEG SLIDE SHOW.

• Press the to select between 5 sec and 10 sec, then press the

Press the SETUP button to exit.

(Default : 5sec)

Cursor buttons (K or L)

ENTER button.

OTHERS PANEL DISPLAY

BRIGHT DIMMER AUTO

OTHERS SLIDE SHOW

5sec 10sec

Reset to the Default Settings

(except for Ratings Control)

This allows you to return all selections of SETUP (except for RATINGS) to their default settings.

Press the SETUP button in stop mode.

Press the INITIALIZE, then press the ENTER button.

Press the press the

Press the

NOTE:

• If you do not wish to initialize, select NO at step .

Cursor buttons (s or B) to select

Cursor buttons (K or L) to select YES, then

ENTER button.

SETUP button to exit.

English

anguage Code List

Language

Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian [BUL] 4853 Burmese 5971 Byelorussian 4851

Cambodian 5759 Catalan 4947 Chinese [CHI] 7254 Corsican 4961 Croatian 5464 Czech [CZE] 4965 Danish [DAN] 5047 Dutch [DUT] 6058 English [ENG] 5160 Esperanto 5161 Estonian 5166

Faroese 5261 Fiji 5256 Finnish [FIN] 5255

If you choose a language that has a three-letter language code (written in bracket), the code will be displayed every time you change the Audio or Subtitle Language setting on page 21. If you choose any other languages, ‘---’will be displayed instead.

A-B

C-E

F-H

Code Language Code Language Code Language Code

French [FRE] 5264 Frisian 5271 Galician 5358 Georgian 5747 German [GER] 5051 Greek [GRE] 5158 Greenlandic 5758 Guarani 5360 Gujarati 5367 Hausa 5447 Hebrew 5569 Hindi 5455 Hungarian [HUN] 5467

Icelandic [ICE] 5565 Indonesian 5560 Interlingua 5547 Interlingue 5551 Inupiak 5557 Irish [IRI] 5347 Italian [ITA] 5566 Japanese [JPN] 5647 Javanese 5669 Kannada 5760 Kashmiri 5765 Kazakh 5757 Kinyarwanda 6469 Kirghiz 5771 Kirundi 6460 Korean [KOR] 5761 Kurdish 5767

Laothian 5861 Latin 5847 Latvian;Lettish 5868 Lingala 5860 Lithuanian 5866

I-K

L-N

Macedonian 5957 Malagasy 5953 Malay 5965 Malayalam 5958 Maltese 5966 Maori 5955 Marathi 5964 Moldavian 5961 Mongolian 5960 Nauru 6047 Nepali 6051 Norwegian [NOR] 6061

Occitan 6149 Oriya 6164 Oromo(Afan) 6159 Panjabi 6247 Pashto;Pushto 6265 Persian 5247 Polish [POL] 6258 Por tuguese [POR] 6266 Quechua 6367 Rhaeto-Romance 6459 Romanian [RUM] 6461 Russian [RUS] 6467

Samoan 6559 Sangho 6553 Sanskrit 6547 Scots Gaelic 5350 Serbian 6564 Serbo-Croatian 6554 Sesotho 6566 Setswana 6660 Shona 6560 Sindhi 6550 Singhalese 6555

O-R

Siswat 6565 Slovak [SLO] 6557 Slovenian 6558 Somali 6561 Spanish [SPA] 5165 Sundanese 6567 Swahili 6569 Swedish [SWE] 6568

Tagalog 6658 Tajik 6653 Tamil 6647 Tatar 6666 Telugu 6651 Thai 6654 Tibetan 4861 Tigrinya 6655 Tonga 6661 Tsonga 6665 Tu rkish [TUR] 6664 Tu rkmen 6657 Tw i 6669

Ukrainian 6757 Urdu 6764 Uzbek 6772 Vietnamese 6855 Volapuk 6861 Welsh 4971 Wolof 6961 Xhosa 7054 Yiddish 5655 Yo r uba 7161 Zulu 7267

U-Z

–25–

Page 27

TROUBLESHOOTING GUIDE

Problem Solution Page

–Check if the AC power cord is properly connected. –Unplug the AC power cord once, and wait for 5-10

seconds and then plug it in again.

–Check if the TV is turned on. –Check the video connection and HDMI connection. –Check the VIDEO/AUDIO cable connections. –Check if the PROGRESSIVE mode is set correctly.

– Sometimes a small amount of picture distortion may

appear. This is not a malfunction. –Connect the player directly to the TV. –Check if the PROGRESSIVE mode is set correctly. –Check the TV TYPE (MULTI, NTSC or PAL).

–Connect the DVD player directly to the TV. –Make sure the disc is compatible with the DVD player.

– Adjust the volume. –Check that the speakers are connected correctly. – The HDMI sound is not output when AUDIO MODE is

set to ANALOG. –Check the digital connections.

–Check the audio settings. – Use a DIGITAL OUT jack when outputting the DTS sound. –Check the HDMI connection. (Check the status of the

HDMI related indications.) –Check whether the connected monitor equipment or

other equipment supports HDCP. (This player will not

output a video signal unless the other equipment

supports HDCP.) –Check the setting of HDMI. –Check whether the output format of this player (HDMI

FORMAT) matches the supported input format of other

connected equipment. –Check the disc for fingerprints/scratches and clean with

a soft cloth wiping from center to edge. –Clean the disc.

–Clean the disc. – Ensure the disc label is facing up. –Check if the disc is defective by trying another disc. –Cancel Ratings control or change the control level. – Insert a correct disc that plays on this player.

–Reset the player by turning it off, then on again. – Aim the remote control directly at the sensor on the front

of the player. –Reduce the distance to the player. –Replace the batteries in the remote control. –Re-insert the batteries with their polarities (+/– signs) as

indicated. –To completely reset the player, unplug the AC cord from

the AC outlet for 5-10 seconds. –Operations may not be permitted by the disc.

Refer to the instructions of the disc. –Use a commonly available CD/DVD cleaner to clean the

lens before sending the DVD player for repair. –The angle cannot be switched for DVDs which do not

contain multiple angles. In some cases multiple angles

are only recorded for specific scenes. –Check the “RATINGS” setting. – Enter the default password “4737”, then your forgotten

password will be cleared.

–– ––

–– 13-14 12-13

11, 23

––

11, 23 15, 23

––

12, 14

12, 24 14, 15

14, 24

–– 24-25

––

24-25 24-25

No power

No sound or picture

Distorted picture

Completely distorted picture or black/white picture with DVD

No sound or distorted sound

No audio at digital output

No DTS sound output No image from HDMI connection

Picture freezes momentarily during playback

Disc cannot be played

No return to start-up screen when disc is removed The player does not respond to the remote

control

Buttons do not work or player stops responding

Player does not respond to some operating commands during playback

DVD player cannot read CDs/DVDs

Angle does not switch

Playback does not start when the title is selected The password for rating level has been

forgotten

If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, consulting the following checklist.

NOTES:

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating Instruction for details on correct operations.

• Playback from a desired track and random playback are not available during program playback.

• Some functions are prohibited on some discs.

–26–

Page 28

SPECIFICATIONS

SIGNAL SYSTEM

NTSC/PAL color

APPLICABLE DISCS

(1) DVD-Video Discs

1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs, 2-layer 12cm double-sided discs (1 layer per side) 1-layer 8cm single-sided discs, 2-layer 8cm single-sided

discs, 2-layer 8cm double-sided discs (1 layer per side) (2) DVD-R/DVD-RW (3) Compact discs (Audio CD)

12cm discs, 8cm discs (4) CD-R/CD-RW

S-VIDEO OUTPUT

Y output level: 1Vp-p (75Ω/ohms) C output level: 0.286Vp-p Output connectors: S connectors, 1 set

VIDEO OUTPUT

Output level: 1Vp-p (75Ω/ohms) Output connector: Pin jacks, 1 set

COMPONENT OUTPUT

Y output level: 1Vp-p (75Ω/ohms)

B/CB output level: 0.648Vp-p (75Ω/ohms)

P PR/CR output level: 0.648Vp-p (75Ω/ohms) Output connector: Pin jacks, 1 set

HDMI OUTPUT

HDMI jack, 1 set

AUDIO OUTPUT

Output level: 2Vrms 2 channel (L, R) output connector: Pin jack, 1 set

AUDIO OUTPUT PROPERTIES

(1) Frequency response

1 DVDs (linear PCM) : 4Hz to 22kHz (48kHz sampling)

2 CDs : 4Hz to 20kHz (2) S/N ratio : 115dB (3)

Total harmonic distortion (4) Dynamic range : DVD: 100dB

DIGITAL AUDIO OUTPUT

Optical digital output: Optical connector, 1 set Coaxial digital output: Pin jack, 1 set

POWER SUPPLY

AC 120V, 60Hz

POWER CONSUMPTION

7W (Standby: 0.3W)

MAXIMUM EXTERNAL DIMENSIONS

W: 17-3/32" (435mm) H: 2-61/64" (75mm) D: 12-13/64" (310mm) (including protruding parts)

MASS

5.06 lbs (2.3 kg)

REMOTE CONTROL UNIT

RC-1018 Infrared pulse type Supply: DC 3V, 2 R6P/AA batteries

: 4Hz to 44kHz (96kHz sampling)

: 1kHz CD: 0.004%

CD: 98dB

English

MAINTENANCE

Cleaning the Cabinet

• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROUBLESHOOTING GUIDE” in this Operating Instruction, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc Handling

• Use discs which have the following logos on them.

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used. Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be

• played on the this product. Do not attempt to play such discs, as they may damage the player.

–27–

Page 29

Printed in China 00D 511 4656 109

TOKYO, JAPAN

www.denon.com

Denon Brand Company, D&M Holdings Inc.

1VMN23653A

E6EH0UD ****