DEMA MODEL 68-4
d
FISHER, CHICAGO, AND T & S FAUCET ADAPTER KIT
1. PARTS:
Model: 68-4
A. (1) 6' Long Hose - Male Garden Hose x Plain En
B. (1) Manifold Assy. P/N 68-4-6
C. (1) Rubber Washer. P/N 150-6
D. (1) Hose Clamp. P/N 76-2-2 Contains Items
E. (2 ea.) Fisher, Chicago, T&S Faucet Adapters. A. thru D.
F. (1) Rubber Washer, Chi cago adapters.*** P/N 150-7
Model: 68-4-2 Model: 68-4-3
Contains Items Contains Items Contains Items
A. thru D. A, B, D, and F A. thru D.
and (2 ea.) Fisher Adapters (2 ea.) Chicago Adapters and (2 ea.) T&S Adapters
P/N 44-3N -6LFC
Model: 68-4-1A
Model: 68-4-4 (regular)
Model: 68-4-7 (large*)
Model: 68-4-4A (regular)
Model: 68-4-2A Model: 68-4-3A
Model: 68-4-7A (large*)
Contains Item C Contains Item F Contains Item C
and (2 ea.) Fisher Adapters and (2 ea.) Chicago Adapters and (2 ea.) T&S Adapters
Model: 68-4JG
Contains Items B (68-4-6JG),
C, D, E, and F
* 68-4-7 and 68-4-7A are for the large institutional size sinks that the regular T&S faucets will not fit.
***150-7 is to only be used with Chicago style adapters.
2. INSTALLATION:
Remove the spout from the faucet and tighten the manifold assembly onto the faucet using a rubber sealing
washer. Next, attach the spout to the top of the manifold assembly and push the hose and clamp onto the male
hose barb. Tighten the hose clamp and attach the other end of the hose to the blend center.
NOTE: Do not remove the o-ring from under the sink spout.
I-487 Pg. 1 of 2
Rev. D-37461 12/13/11
DEMA MODEL 68-4
FISHER, CHICAGO, AND T & S FAUCET ADAPTER KIT
BLEND CENTER
HOSE
WORM GEAR
CLAMP
SPOUT
MALE ADAPTER
SHUT-OFF VALVE
FEMALE ADAPTER
WASHER
FAUCET
RETURNS: NO MERCHANDISE MAY BE RETURNED FOR CREDIT WITHOUT DEMA’S
WRITTEN PERMISSION. RETURN MERCHANDISE AUTHORIZ ATION NUMBE R REQUIRE D
IN ADVANCE OF RETURN.
WARRANTY: DEMA products are warranted against defective material and workmanship under normal use and service for
one year from the date of manufacture. This limited warranty does not apply to any products which have a
normal life shorter than one year or failure and damage caused by chemicals, corrosion, improper voltage
supply, physical abuse, or misapplication. Rubber and synthetic rubber parts such as “O”- rings, diaphragms,
squeeze tubing and gaskets are considered expendable and are not covered under warranty. This warranty is
extended only to the original buyer of DEMA products. If products are altered or repaired without prior
approval of DEMA, this warranty will be void.
Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows them
to be defective, they will be repaired or replaced without charge, F.O.B. factory. DEMA assumes no liability
for damages. Return merchandise authorization number, to return units for repair or replacement, must be
granted in advance of return.
I-487 Pg. 2 of 2
Rev. D-37461 12/13/11
Loading...