DEMA REPAIR KIT 24-62
FOR INJECTOR CHECK VALVES
USED IN METERING KNOBS WITH 1/4" DIA. INLET TUBING BARBS
24-25
24-24P
PUSH
24-23
24-34-
25-29
ENLARGED
COIL IN FIRST
QUANTITY
1
1
1
1
1
RETURNS: NO MERCHANDISE MAY BE RETURNED FOR CREDIT WITHOUT DEMA’S WRITTEN
PERMISSION. RETURN MERCHANDISE AUTHORIZATION NUMBER REQUIRED IN
ADVANCE OF RETURN.
WARRANTY: DEMA products are warranted against defective material and workmanship under normal use and
service for one year from the date of manufacture. This limited warranty does not apply to any products
which have a normal life shorter than one year or failure and damage caused by chemicals, corrosion,
improper voltage supply, physical abuse, or misapplication. Rubber and synthetic rubber parts such as
“o”- rings, diaphragms, squeeze tubing and gaskets are considered expendable and are not covered
under warranty. This warranty is extended only to the original buyer of DEMA products. If products
are altered or repaired without prior approval of DEMA, this warranty will be void.
Defective units or parts should be returned to the factory with transportation prepaid. If inspection
shows them to be defective, they will be repaired or replaced without charge, F.O.B. factory. DEMA
assumes no liability for damages. Return merc handise authorization number, to return units for repair
or r epl acem ent, mus t be gr anted in ad vance of return.
PART NO.
24-23
24-24P
24-25
24-34-7
24-29
SPRING
BALL (TEFLON)
O-RING (SMALL)
CORE
O-RING (LARGE)
DESCRIPTION
I-279 Pg. 1 of 1
Rev. A0500
Loading...