
D26-ML
Dimensional View
Units: Inches [mm]
D
C
Deltrol
CONTROLS
Force Curves
D26ML INTERMITTENT DUTY (12W)
140
120
100
80
60
FORCE (OZ)
40
20
0
0.000 0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.400 0.450 0.500
Standard intermittent duty cycle at nominal voltage is 25%, with three (3) minutes maximum “ON” and nine “9” minutes
minimum ”OFF” in a repetitive cycle. Standard Pulse duty cycle is 10% with 100 milliseconds “ON” and 900 milliseconds “OFF”.
NOTE: Approx. 36 sq. in Heat Sink Required.
Specications subject to change without notice
2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | sales@deltrol.com
25º C - 100% VOLTAGE
105º C - 100% VOLTAGE
MAGNET ONLY - HOLD FORCE 109 OZ
STROKE (IN)
2 of 3
©2011 Deltrol Controls - A Division of Deltrol Corp.
Rev 07/08/11