10
160
SERIES 5 AND 13 AMP
GENERAL PURPOSE
PLUG-IN RELAY
FEATURES
■ Class F Coil Insulation System for 155°C Total Temperature
■ Coil Molded in DuPont Rynite®for Environmental Protection
■ Unique Armature Stop Maintains Adjustment
■ Fine Wire Gauge Coils are Skeined for Coil Integrity
CONTACT DATA
CONFIGURATION:
Thru 3PDT
MATERIALS:
5 AMP:
1/8" Diameter Moveable Fine Silver
3/16" Diameter Stationary Fine Silver
13 AMP:
3/16" Diameter Moveable Silver Cadmium Oxide
3/16" Diameter Stationary Fine Silver
Gold Flash Standard on All Contacts
Gold Diffused Available on Special Order – Min. Qty. Req’d.
CONTACT RATINGS
POLE UL
MODEL
CONFIGURATION RATINGS
5 amp or 1/8 HP at 120VAC
160/165 thru 3PDT
5 amp or 1/4 HP at 277VAC
2 amp at 600VAC
5 amp at 28VDC
13 amp or 1/3 HP at 120VAC
13 amp or 1/2 HP at 277VAC*
10 amp at 28VDC
161/166 thru 3PDT 1 HP at 277VAC - 3 phase
3 amp or 3/4 HP at 600 VAC
12 FLA, 35 LRA at 15VAC
thru 3 amp at 150VDC
166E
DPDT 30,000 cycles
(
w/Blowout
) Form X, Y, 10 amp at 150VDC
Magnet
W, and Z 100,000 cycles
POLE SEMKO
MODEL
CONFIGURATION RATINGS
5 amp at 250VAC 50 Hz AC-1
165 F, P, TM thru 3PDT 5 amp at 28VDC DC-1
2.9 amp at 240VAC 50 Hz AC-3
10 amp at 250VAC 50 Hz AC-1
166 F, P, TM thru 3PDT 10 amp at 28VDC DC-1
4.9 amp at 240VAC 50 Hz AC-3
*3 Pole Devices Rated at 6-2/3 Amp When Switching Greater Than
150VAC, Unless Polarity is the Same on All Poles.
UL RECOGNIZED FILE NO.: E37066
US and Canadian Recognition
SEMKO CERTIFICATE NO.: 9726189/01-02 Model 165/166 F,P,TM
EXPECTED LIFE
Electrical At Rated Load (Minimum)
100,000 Operations Except as Noted
Mechanical Life
10,000,000 Operations
DIELECTRIC STRENGTH
800 VRMS, 60 Hz Between Contacts
2200 VRMS, 60 Hz Between All Other Elements
MODELS
160: 5 Amp Open Frame 161: 13 Amp Open Frame
165: 5 Amp Covered Plug-In 166: 13 Amp Covered Plug-In
165F: 5 Amp Flanged Cover w/QC Terminals
166F: 13 Amp Flanged Cover w/QC Terminals
166E: Addition of Blowout Magnets – For Higher DC Ratings
Other Suffixes Available
A-Indicator Lamp, B-Push to Test Button
P-Printed Circuit Terminals, TM-Top Mount Cover
COIL DATA
RESISTANCE NOMINAL
NOMINAL
IN OHMS COIL
VOLTAGE
± 10% POWER
6VAC 5.0
12VAC 20
AC Coils
24VAC 80 2.0VA
Single
48VAC 315
Pole Units
120VAC 2025
240VAC 8000
6VAC 4.5
12VAC 18
AC Coils
24VAC 72 2.2VA
2 & 3
48VAC 285
Pole Units
120VAC 1850
240VAC 7200
6VDC 30
DC Coils 12VDC 120
1-3 24VDC 480 1.2W
Pole Units 48VDC 1850
110VDC 10,000
Coil Voltages: USA/Canada European
AC: Up to 277 Volts/60 Hz AC: Up to 250 Volts 50/60 Hz
DC: Up to 125 Volts DC: Up to 125 Volts
Coil Treatment: Molded Rynite®Std. Class F
Insulation Resistance: 100 Megohms Minimum
UL Insulation System File No.: E74443
S155D 155°C Total Temperature Std.
(Covers S105 Class A and S130D Class B Requirements)
OPERATE DATA
Pick Up (at 25°C): AC: Volts 85% or Less of Nominal
DC: Volts 75% or Less of Nominal
Operate Time: Approx. 15 Milliseconds
Release Time: Approx. 15 Milliseconds
ENVIRONMENTAL DATA
Operating Ambient: AC: -45° to 55°C DC: -45° to 70°C
Coil Temperature Rise: (25°C Ambient – Continuous Duty)
AC: 45°C Approx. @ 60 Hz – Use at 50 Hz will
Cause Slight Increase in Coil Rise
DC: 25°C Approx.
MECHANICAL DATA
Terminals: All Versions (Except P suffix)
.187" x .020" Quick Connect/Solder
P suffix Version Printed Circuit Pins
Cover: Clear Polycarbonate – Flammability Rating 94V2
Weight: Approx. 3 oz. (85 g)
166
161
Semko marked
upon request
model 165/166 F, P, TM
DIVISION OF DELTROL CORP.
DIMENSIONS
[Unit Inch (mm)]
SCHEMATICS
5 AMP Part Numbers
AC Coils DC Coils
MODEL
POLE
24VAC 120VAC 240VAC 12VDC 24VDC 110VDC
CONFIGURATION
SPDT 20323-82 20323-84 20323-85 20326-81 20326-82 20326-84
165 DPDT 20324-82 20324-84 20324-85 20327-81 20327-82 20327-84
3PDT 20325-82 20325-84* 20325-85 20328-81 20328-82 20328-84
SPDT 20542-82 20542-84 20542-85 20548-81 20548-82 20548-84
165F DPDT 20543-82 20543-84 20543-85 20549-81 20549-82 20549-84
3PDT 20544-82 20544-84 20544-85 20550-81 20550-82 20550-84
13 AMP Part Numbers
SPDT 20300-82 20300-84* 20300-85 20303-81 20303-82 20303-84
161 DPDT 20301-82 20301-84* 20301-85 20304-81 20304-82 20304-84
3PDT 20302-82 20302-84 20302-85 20305-81 20305-82 20305-84
SPDT 20306-82 20306-84 20306-85 20309-81 20309-82 20309-84
166 DPDT 20307-82* 20307-84* 20307-85* 20310-81* 20310-82* 20310-84
3PDT 20308-82* 20308-84* 20308-85* 20311-81* 20311-82* 20311-84*
SPDT 20379-82 20379-83 20379-84 20382-81 20382-82 20382-83
166A DPDT 20380-82 20380-83 20380-84 20383-81 20383-82 20383-83
3PDT 20381-82* 20381-83* 20381-84 20384-81 20384-82 20384-83
SPDT 20545-82 20545-84 20545-85 20551-81 20551-82 20551-84
166F DPDT 20546-82* 20546-84* 20546-85 20552-81 20552-82 20552-84
3PDT 20547-82* 20547-84* 20547-85 20553-81 20553-82 20553-84
* Black Items are Normally Stocked.
Blue Items are Non Stock. Minimum Quantity May Be Required.
ORDERING INFORMATION
See Page 30 for Dimensions and Specifications
DIN Rail Mtg Hold Down Springs Back Connecting
SPDT 20313-80 20312-80* 20395-80 20314-80*
DPDT 20982-81* For DIN Sockets 20902-03* DPDT 20313-81* 20312-81* 20395-81 20314-81*
3PDT 20982-82* For Back Connecting 20902-00* 3PDT 20313-82* 20312-82* 20395-82 20314-82*
SOCKETS
Printed CircuitDeep Barrier TypeSolderQuick-Connect
160/161P
160/161 OPTIONAL WITHOUT STUD
160/161 STANDARD WITH STUD
165/166 ADD B FOR
PUSHBUTTON
165F/166F
166TM
MOUNTING DIMENSIONS
FOR PRINTED CIRCUIT
TERMINALS
OPTIONAL TOP AND SIDE MOUNTINGS
SPDT
DPDT
3PDT
11
.149
(3.78)
.050 x .032
(.06 x .81)
.187 x .032
(4.75 x .81)
TERMINALS
165P/166P
.187 (4.75) x .020 (0.51)
Q.C. MALE TERMINALS
1.45
(36.83)
1.45
(36.83)
2.05
1.27
(32.26)
.375 (9.53)
6-32 NC-2A
THREAD
.437 (11.10)
.065 (1.65)
x .156 (3.96)
x .218 (5.54) TAB
.0375 (.953)
1.27
(32.26)
(52.07)
MAX.
1.27
(32.26)
.69 (17.53)
NC-2A
THREAD
.437
(11.10)
.437 (11.10)
.16 (4.06)
.065 (1.65) x
.156 (3.96) x
.156 (3.96) TAB
.437
(11.10)
6-32
PUSH
BUTTON
.23
(5.84)
2.20
(55.88)
2.90 (73.66)
.625
(15.88)
1.50
(38.10)
.745 (18.92)
N.C. CONTACTS
N.O. CONTACTS
SWINGERS
COIL
6-32 NC-2B TAP
.312 (7.92) MIN DEEP
2.50 (63.50)
6-32
NC-2A
THREAD
.34
(8.64)
.156
(3.96)
1.37 (34.80)
.085
(2.16)
MAX.
.036
(0.91)
2.05 (52.07) MAX.
Ø .141 (3.58) (2) HOLES
.500
(12.70)
2.156 (54.76)
2.531 (64.29)
.300 (7.62)
.620 (15.75)
.825 (20.96)
.874 (22.20)
.437 (11.10)
Ø .078 (1.98)
Loading...