X4
BLUETOOTH HEADSET
with volume control
USER’S GUIDE
Headset Features
Detachable
Earhook
Charging
Port
Indicator
Light
(-) Volume Down
(+) Volume Up
The Bluetooth Headset allows you freedom to make and
receive calls while on the move or in the office. You can connect
the headset to a compatible phone that supports Bluetooth wire
-less technology.
Read this user guide carefully before using the headset. Read
also the user guide for your phone, which provides important
safety and maintenance information. Keep the headset and it’s
accessories out of reach of small children.
Bluetooth wireless technology
Bluetooth wireless technology allows you to connect compatible
communication devices without cables. A bluetooth connection
does not require the phone and the headset be in line of
sight, but both devices should be within 10 meters(30 feet) of
each other.Connections can be subject to interference from ob
-structions,such as walls,or other electronic devices.
The headset is compliant with the Bluetooth Specification 2.0+
EDR supporting the following profiles: Headset Profile1.1 and
Hands -Free Profile 1.5 Check with the manufacturers of other
devices to determine ther compatibility with this device.
Their may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.
1.Introuduction
1
Before you can start using the headset, you must charge the
battery and connect the headset with a compatible phone.
Note: Pats of the headset are magnetic, metallic mater
-ials may be attracted to the headset, do no place cr
-edit cards or other magnetic storage media near the
headset, because information stored on them may be
erased.
Overview
The headset contains the following parts:
(1)Charger connector
(2)Earloop
(3)Bluetooth headset
2.Get started
2
Chargers and batteries
Check the model number of any charger before using it with this
device.
Warning: use only chargers approved for
use with this particular enhancement. The use of any
other types may invalidate any approval or warranty,
and may be dangerous,
For availability of approved enhancement, please check with your
dealer. When you disconnect the power cord of any enhancement.
grasp and pull the plug, not the cord.
Charge the battery
This device has an internal non-removable, rechargeable battery.
Do not attempt to remove the battery from the device as you
may damage the device.
1.Connect the charger cable to the headset.
2.Connect the charger to a wall outlet. The red indicator light
is on during charging. If charging does not start,disconnect
the charger, plug it in again, and retry. Charging the battery
fully may take up to 2 hours.
3
3.When the battery is fully charged, the red indicator light turns off
and the blue indicater light turn on Disconnect the charger from
the wall outlet and the headset
The fully charged battery has power for up to 3 hour-6 hours
30 minutes of talk-time or up to 100 hours-180 hours of stand
-by time.However,the talk and standby times may vary with dif
-ferent mobile phones,products that use a Bluetooth connection,
usage settings,styles.and environments.
Switch the headset on or off
To switch on press and hold down the power key. The headset the beep
and the blue indicator light is displayed. When the headset is connected
to a mobile phone and ready for use, the blue indicator
ligt will flashes slowly.
To switch off press and hold the power key, the headset beeps
and the Red indicator flashes.
4
Charge the battery
This device has an internal non-removable, rechargeable
battery. Do not attempt to remove the battery from the device as
you may damage the device.
1. Connect the charger cable to the headset.
2. Connect the charger to a wall outlet.
The red indicator light is on during charging.
If charging does not start, disconnect the charger, plug it in again,
and retry. Charging the battery fully may take up to 2 hours.
5
Connecting the Headset to a compatible Phone.
1. Activate the Bluetooth feature on your Phone and have it ready
to search for Bluetooth devices, see user guide of your Phone
for Instructions.
2. Switch on the Headset and keep your finger on the Power Button,
the Blue Indicator light will flash and then stay on.
3. With your finger still pressed down on the Power Button,
search for Bluetooth devices on your mobile.
4. From the list of devices that appear select the Headset,
Roman R200, at this point you can remove your finger
from the power Button.
5. Enter the Passcode 0000 and connect the Headset.
In some phones you may need to make the connection
separately after connecting, see the user guide of
your Phone for instructions.
6. If the connection is successful the headset will beep and
appear in the phone menu, where you can view the currently
connected Bluetooth devices.
6
Disconnect the headset from the phone.
To disconnect the headset from your phone (for example,
to connect the phone to another Bluetooth device).
Do one of the following:
Switch off the headset
Disconnect the headset in the Bluetooth menu of your phone.
Move the headset more than 10 meters (30 feet)
away from the phone.
You do not need to delete the connection with the
headset to disconnect it.
Reconnect the headset to your phone.
To connect the headset to your phone, switch on the headset
make the connection in the Bluetooth menu of your phone,
or press and hold the answer/end key.
You can set your phone to connect with the headset automatically,
when the headset is switched on. By changing your connected
device settings in the Bluetooth menu.
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
Ensure that the headset is charged, switched on, and paired
with and connected to your phone.
Ensure that the Bluetooth feature is activated on your phone.
Check that the headset is within 10 meters (30 feet) of your
phone and that there are no obstructions between the
headset and the phone, such as walls or other electronic devices.
7
Loading...