AR2X Smart Sensor
User Guide
Document Number 1024
Revision 2.1
December 9, 2015
This document is the property of Delta Mobile Systems, Inc. and is considered
CONFIDENTIAL PROPRIETARY
2015 Delta Mobile Systems, Inc. All rights reserved.
Revision History
Revision Date Description Author
2 11/5/2015 Released version DJ
2.1 12/9/2015 Add IC statements DJ
Table of Contents
1.Overview.........................................................................................................................................................3
2.Setup and Operation.......................................................................................................................................3
2.1.Placement................................................................................................................................................3
2.2.Standalone or Connect to Host System...................................................................................................3
2.3.Power On................................................................................................................................................4
3.Regulatory Notices.........................................................................................................................................5
3.1.Federal Communications Commission (FCC)........................................................................................5
3.2.IC Warning Statement.............................................................................................................................5
www.deltamobile.com
Printed: 12/9/2015 Confidential & Proprietary 2 of 5
1. Overview
The AR2X Smart Sensor detects objects and reports characteristics of the detected objects such as presence, distance, speed, and direction of motion.
The AR2X Smart Sensor is the intellectual property of Delta Mobile Systems, Inc.
AR2X Sensor
2. Setup and Operation
2.1. Placement
For optimal performance, the AR2X should be placed in a fixed position. The back of the AR2X
housing features mounting holes for this purpose.
Orient the AR2X such that the housing surface with the Delta Mobile Systems logo is directed
towards the area of interest to be monitored.
2.2. Standalone or Connect to Host System
The AR2X may operate as a standalone monitoring device or it may be connected to a host system
via Delta Mobile Systems' Control Unit.
When objects are detected and/or have measured characteristics within certain parameters, the
AR2X can alert users via LEDs, audible signals, or other similar warning techniques. For example,
if an object is detected within a specified distance, the AR2X can output an alert.
www.deltamobile.com
Printed: 12/9/2015 Confidential & Proprietary 3 of 5
2.3. Power On
Supply 5VDC power to the AR2X.
The AR2X will turn on and automatically begin monitoring the coverage area for objects that are
within pre-set parameters, such as distance criteria.
www.deltamobile.com
Printed: 12/9/2015 Confidential & Proprietary 4 of 5
3. Regulatory Notices
3.1. Federal Communications Commission (FCC)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
3.2. IC Warning Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:
1. l'appareil ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
www.deltamobile.com
Printed: 12/9/2015 Confidential & Proprietary 5 of 5
Loading...