Delta Electronics orporated VFRU 25 26BT User Manual

VFRU-25-26BT 使用說明

A. Turn on

 Plug the included USB cable into the DC IN jack on the side of the speaker

Plug the other end of the USB charging cable into 5VDC power source, the

power up tone sounds and the button starts blinking

 Press the button on the top of the speaker, the button starts

blinking

B. BT Play Music

Step1: Pairing mode

Make sure the button is blinking rapidly in the pairing mode.

Step2: Pair + Connect

1. Enable Bluetooth on your smartphone or other device and choose

DeltaBreez SIG from the pairing options on your smartphone.

2. The speaker gives an audio signal when it’s finished pairing and connecting

to your smartphone.

The button turns solid blue

3. To give one press to the button be Pause and press button again

be Play.

Step3: Disconnect

If disable Bluetooth on your smartphone or other device, the button

is blinking.

If you want to pair to a new device, give a short double-press to the

button. The speaker gives a signal and the button starts blinking.

C. Aux in Play Music

Step1: Aux in mode

Use a 3.5mm audio cable (not include) to connect the audio output from your

device to the AUX IN audio input on the speaker’s side panel.