Delta Electronics orporated DVWW0001 User Manual

Mini PCIe 11agn

Product Overview

Industrial Embedded Wireless Modules

IEEE 802.11 a/b/g/n PCI Express Mini Card

Key Features

Preliminary release the fastest
Industrial transmission wireless
module, which is compliant with IEEE

802.11 b/g/n standard. The Mini PCIe
card design with 3 x 3 MIMO for high
throughput performance. It also
supports frame data transfer to and
from the host using PCI Express 1.1
interface to provide interrupt
generation and reporting, power save,
and status reporting function.
Mini PCIe 11agn is which supports
double 802.11n bandwidth, allows the
reliable real-time delivery of video,

Embedded Wireless Modules

voice, and data. Multi-redundant links
guarantee that WLAN networks will
always be in service, and fast secure
roaming ensures seamless
connectivity during
mobility.
Finally, Industrial Embedded
Wireless Modules provides
unparalleled reliability under extreme
conditions, allowing you to extend
your network wherever it is required.
Vertical application includes Bus,
underground mining, onshore drilling,
Power utility, and smart grid.

• Compatible with IEEE 802.11a/b/g/n dual-band (2.4 & 5 GHz) standard

• Supports 3Tx/3Rx MIMO

• Transmission up to 450 Mbps data rate for 40 MHz channels

• Supports WEP,TKIP, AES ,and WAPI hardware Encryption

• Harsh operating temperature: -40 to 75° C

• Compatible OS with Windows and Linux

Specs

Model

Brand Name

Form Factor

Wireless Standard
Chipset
Signal Protocol

Antenna

Operating Voltage DC 3.3V ± 5%

Operational Temperature -40 ~ 75°C (Wide Temperature)

Dimensions (L x W x H)

Security

Mini PCIe 11agn

Delta

Full Size Mini PCIe Card

IEEE 802.11 a/b/g/n
Atheros AR9590
PCIe Differential

3 x U.FL connectors (3T/3R)

50.8 x 29.85 x 3.25 mm

Supports 64/128 WEP, WPA, WPA2,

802.1x/RADIUS, TKIP and AES

MIMO 3T x 3R

Data Rate

O.S Supported O.S Win XP/ 7/8, Linux

Host Type PCIe Mini card

Warranty 5 years

Ordering Information

Mini PCIe 11agn: One IEEE 802.11 a/b/g/n PCI Express Mini Card

Miscellaneous

Certification: CE , FCC
Support Client: Microsoft Windows XP/7/8 or Linux
Box Shipping Weight: TBD
Dimension : TBD

The Best Industrial Wireless Solution Provider

450 Mbps

Package Content Purchase Items

One Module
Three External 2dBi Antenna (Option)
One SDK Guide (Option)

TEL: [phone] #3225 FAX: [phone]
256 Yang Gung St., Neihu, Taipei 11491, Taiwan
[e-mail]
www.dninetworks.com

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off

Product Overview

and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

IMPORTANT NOTE:
Radiation Exposure Statement:

Embedded Wireless Modules

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the US/CANADA.

This device is intended only for OEM integrators under the following conditions:

1). The antenna must be installed such that 20 cm is maintained between the antenna and users, and

2). The transmitter module may not be co-located with any other transmitter or antenna,

3). For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by
supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to
Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator
is still responsible for testing their end-product for any additional compliance requirements required with this
module installed

IMPORTANT NOTE

In the event that these conditions can not be met (for example certain laptop configurations or co-location with
another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on
the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.

End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm
may be maintained between the antenna and users. The final end product must be labeled in a visible area with
the following: “Contains FCC ID: 2ACG2DVWW0001”.

Manual Information to the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove
this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.

TEL: [phone] #3225 FAX: [phone]
256 Yang Gung St., Neihu, Taipei 11491, Taiwan
[e-mail]

The Best Industrial Wireless Solution Provider

www.dninetworks.com

NCC警語：

經型式認證合格之低功率射頻電機，非經許可，公司，商號或使用者均不得擅自變更頻率、加大功率或變更原設計

之特性及功能。

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時

方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波
輻射性電機設備之干擾。

Product Overview

無線傳輸設備 (UNII)
在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。

無線資訊傳輸設備忍受合法通信之干擾且不得干擾合法通信；如造成干擾，應立即停用，俟無干擾之虞，始得繼續

使用。

無線資訊傳設備的製造廠商應確保頻率穩定性，如依製造廠商使用手冊上所述正常操作，發射的信號應維持於操作

頻帶中。
本模組於取得認證後將依規定於模組本體標示審驗合格標籤

系統廠商應於平台上標示「本產品內含射頻模組: CCAFXXLPXXXXTX)」字樣

Embedded Wireless Modules

The Best Industrial Wireless Solution Provider

TEL: [phone] #3225 FAX: [phone]
256 Yang Gung St., Neihu, Taipei 11491, Taiwan
[e-mail]
www.dninetworks.com