Through Hole Power Inductors
0
0.2
0. 4
0.6
0.8
1
1.2
0 10 20 30 40
THAR0806 Type
Features
RoHS compliant.
High current ( lsat up to 40A ) though hole type.
Magnetically shielded, suitable for hight density mounting.
High energy storage and low DCR.
Ideal for power source circuits, DC-DC converter,
DC-AC inverters inductor application.
In addition to the standard versions shown here,
customized inductors are available to meet your exact requirements.
Mechanical Dimension:
A
E
Electrical Characteristics :
PART NO.
THAR0806-R47 0.47 2.6 34 19 6.3 / 0.248 0.8 / 0.031 4.5 / 0.177 1.2 / 0.047
THAR0806-0R6 0.60 2.6 30 19 6.3 / 0.248 0.8 / 0.031 4.5 / 0.177 1.2 / 0.047
THAR0806-0R8 0.80 3.0 27 18 6.3 / 0.248 0.8 / 0.031 4.5 / 0.177 1.2 / 0.047
THAR0806-1R0 1.00 4.7 22 15 6.3 / 0.248 0.7 / 0.028 4.5 / 0.177 1.1 / 0.043
THAR0806-1R2 1.20 4.7 21 15 6.3 / 0.248 0.7 / 0.028 4.5 / 0.177 1.1 / 0.043
THAR0806-1R5 1.50 6.0 15 12 6.8 / 0.268 0.6 / 0.024 5.0 / 0.197 1.0 / 0.039
THAR0806-1R8 1.80 10.4 14 10 6.8 / 0.268 0.5 / 0.020 5.0 / 0.197 0.9 / 0.035
THAR0806-2R0 2.00 10.4 12 9 6.8 / 0.268 0.5 / 0.020 5.0 / 0.197 0.9 / 0.035
THAR0806-2R5 2.50 11.5 10 8 6.8 / 0.268 0.5 / 0.020 5.0 / 0.197 0.9 / 0.035
L
(uH)
D C
B
o
At 25 : 100KHz, 1V
C
1
DCR
(m ) 8%
F
Isat
(Adc)
RECOMMENDED PAD PATTERNS
2x H
G
G
2
Irms
(Adc)
3
E 0.5
(mm/inch)
F 0.1
(mm/inch)
UNIT : mm/inch
A = 8.20 / 0.323 Max.
B = 8.20 / 0.323 Max.
C = 3.50 0.5 / 0.138 0.020
D = 6.00 / 0.236 Max.
G 0.5
(mm/inch)
H Max.
(Mm/inch)
INDUCTANCE (uH)
1. Lo is the initial inductance and the tolerance is 20%.
2. Isat is the DC current which cause the inductance drop less than 20% of its nominal inductance without current.
3. Irms is the DC current which cause the surface temperature of the part increase approximately 45 C.
4. Operating temperature : -40 C to 125 C ( including self-temperature rise ).
OO
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
DC BIAS (A)
150
O