Delta Electronics SIL625 User Manual
SMT Power Inductor
SIL625 Type
Features
RoHS compliant.
Small size (5.6mm*5.6mm), Low profile (2.0mm max. height) SMD type.
Magnetically shielded, suitable for high density mounting.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
Mechanical Dimension:
C
B
RECOMMENDED PAD PATTERNS
6.3
A
1
Electrical Characteristics:
PART NO.
SIL625 - 0R6 0.6 0.016 4.30
SIL625 - 1R0 1.0 0.026 3.40
SIL625 - 1R8 1.8 0.030 2.90
SIL625 - 2R2 2.2 0.032 2.50
SIL625 - 3R0 3.0 0.037 2.30
SIL625 - 3R8 3.8 0.045 2.00
SIL625 - 4R7 4.7 0.048 1.80
SIL625 - 220 22.0 0.181 0.70
1. Tolerance of inductance : 3 0%.
2. Irated is the DC current which cause the inductance drop less than 35% of its nominal inductance without current
and the surface temperature of the part increase less than 45 C.
3. Operating temperature: -20 C to 105 C (including self-temperature rise).
(uH)
o
25 C: 100KHz, 0.1V
1
L
DCR
( ) MAX
oo
D
Irated
(Adc)
1.5
6.3
2
2
o
UNIT : mm/inch
A = 6.0 / 0.236 Max.
B = 6.0 / 0.236 Max.
C = 2.5 / 0.098 Max.
D = 2.0 0.1 / 0.079 0.004
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
36
Loading...