OPT-155Axxxx
155Mbps 1x9 SC/ST Duplex Optical Transceiver Module for
Fast Ethernet, ATM, SONET/OC-3, SDH/STM-1
Features:
Full Compliance with the Optical
Performance Requirement of ATM
100Mbps and 100 Base-FX Version of
IEEE 802.3u.
Industry S tandard 1x9 Footpr int and
Duplex SC or ST Connector Interface.
Single 5V OPT-155A1Hxx or 3.3V
OPT-155A2Hxx Power Supply.
PECL Differential Inputs and Outputs.
PECL Receiver Signal Detect Indicator.
Wave Solder and Aqueous Wash Process
Compatible.
RoHS Compliant per Directive 2002/95/EC .
Description
The OPT-155AxHxx series are 1x9 optical
transceiver modules designed expressly for
high-speed communication applications that require
rates of up to 155Mbps. They are all compliant with
the SONET/SDH standards.
The OPT-155AxHxx transceivers are supplied in
industry standard 1x9 SIP package style with either
duplex SC or duplex ST connector. Moreover the
OPT-155AxHx series also include a Signal-Detect
circuit that provides PECL logic output state.
The OPT-155AxHxx series meet Class-1 eye safety
standard and effective distance up to 2Km.
The transmitter sections utilize 1310nm Surface
Emitting InGaAsP LEDs. These LEDs are packaged
in the optical subassembly portion of the transmitter
section. A custom silicon IC that converts differential
PECL logical signals into an analog LED driving
current drives it.
The receiver sections utilize InGaAs PIN
photodiodes coupled into a custom silicon
trans-impedance preamplifier IC. These are
packaged in the optical subassembly portion of
receiver.
The receiver sections utilize InGaAs PIN
photodiodes coupled into a custom silicon
trans-impedance preamplifier IC. These are
packaged in the optical subassembly portion of
receiver.
These PIN/Preamplifier combinations are coupled
into a custom quantizer IC which provides the final
pulse shaping for logic output and the signal Detect
function. The data output is differential. The signal
detect output is signal-ended.
Application:
Multimode Fiber Backbone Links.
Fast Ethernet and ATM Compatible.
Multimode Fiber Media Convert
DELTA ELECTRONICS, INC.
www.deltaww.com
1
Jan., 2008
Rev. :0F
OPT-155Axxxx
Absolute Maximum Ratings
Parameter
Storage Temperature Ts -40 85 ℃
Lead Soldering Temperature T
Lead Soldering Time t
Supply Voltage Vcc 0 6 V
Recommended Operating Conditions
Parameter Symbol Min. Typ. Max. Unit Note
Data Rate 100 155.52 200 Mbps
Ambient Operating Temperature TA 0 70 ℃
Supply Voltage
OPT-155A1Hxx
-155A2Hxx
OP
Electrical Characteristics
Parameter Symbol Min. Typ. Max. Unit Note
Transmitter
Transmitter Data Input Voltage-Low VIL-Vcc -1.81 -1.48
Transmitter Data Input Voltage-High VIH-Vcc -1.16 -0.88
Receiver
Data Output Voltage-Low VOL-Vcc -1.95 -1.62 V
Data Outpot Voltage-High VOH-Vcc -1.045 -0.74 V
SD Output Voltage-Low V
SD Output Voltage-High V
Symbol Min. Typ. Max. Unit Note
260 ℃
sold
10 Second
sold
Vcc
4.75
3.15
-Vcc -1.95 -1.62 V
SDL
-Vcc -1.045 -0.74 V
SDH
5
3.3
5.25
V
3.45
V
V
Optical Characteristics
(Data Rate = 155.52Mbps, PRBS=2
Parameter
23
-1, NRZ, 62.5/125um MMF)
Symbol Min. Typ. Max. Unit Note
Transmitter
Supply Current Icc
185 mA OPT-155A1 Series
165 mA OPT-155A2 Series
Mean Launch Power
62.5/125um, NA=0.275 Fiber -20 -14
50/125um,NA=0.20 Fiber
Po
-22.5 -14
dBm
Optical Extinction Ratio E.R 9 dB
Center Wavelength λc 1310 nm
Spectral Width (RMS) σ 200 nm
Optical Risetime /Falltime tr/rf 3.0 ns 10%~90%
Output Eye Diagram Compliant with ITU-T recommendation G.957
Receiver
Supply Current Icc
145 mA OPT-155A1 Series
120 mA OPT-155A2 Series
Sensitivity PIN -31 dBm
Input Optical Wavelength
λ
1100 1600 nm
Signal Detect-Asserted PA -31 dBm
Signal Detect-DeAsserted PD -45 dBm
Signal Detect-Hysteresis PA-PD 0.5 dB
Overload P
Note: The Sensitivity should be tested at BER of 1x10
DELTA ELECTRONICS, INC.
www.deltaww.com
-14 dBm
SAT
-10
or better with an input signal consisting of 155Mbps,
2
Jan., 2008
Rev. :0F
NRZ, PRBS=2
Mask of the eye diagram for the optical transmit signal
23
-1 and E.R= 9dB.
OPT-155Axxxx
DELTA ELECTRONICS, INC.
www.deltaww.com
3
Jan., 2008
Rev. :0F