Delta Electronics HAL1345 User Manual
SMT Power Inductor
HAL1345 Type
Features
RoHS compliant.
Low profile, SMD type.
High current.
Magnetic shielded.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
Mechanical Dimension :
RECOMMENDED PAD PATTERNS
B¡Ó
¡Ó
A
Electrical Characteristics :
1
PART NO.
HAL1345-0R5 0.5 0.4 1.80 30 27
HAL1345-0R9 0.9 0.8 2.50 25 22
HAL1345-1R5 1.5 1.2 3.45 18 20
HAL1345-2R2 2.2 1.9 5.20 15 15
1. Lo is the initial inductance and the tolerance of inductance is 20%.
2. Isat is the DC current which cause the inductance drop approximately 20% of is nominal inductance without current.
3. Irms is the DC current which cause the surface temperature of the part increase less than 45 C.
4. Operating temperature : -20 C to 105 C ( including self-temperature rise ).
Lo
(uH)
C
O
25 , 100KHz, 1V
C
Li
(uH) 20%
OO
E
F
DCR
(m ) MAX
4.1
UNIT : mm/inch
A = 12.5 0.4 / 0.492 0.016
B = 12.5 0.4 / 0.492 0.016
C = 4.50 / 0.177 Max.
D = 7.75 / 0.305
E = 2.40 / 0.094 REF
F = 10.35 / 0.407
G = 3.75 / 0.148
O
Isat
(Adc)
3.10
2
8.98
5.82
Irms
(Adc)
3.18
3
D
G
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
103
Loading...