Page 1
The FR 2000 Rectifier
Description:
The FR 2000 rectifier is a single phase, hot-pluggable, fan-cooled rectifier. The constant output power characteristic
supplies the specified power over the full output voltage range. The benefit is an optimised modular system design
(fewer number of modules) and matches the supply requirements for state-of-the-art telecom equipment. This
performance as well as the extended temperature range, wide input voltage range, high power density and
advanced technology are the key factors of the success of this rectifier and it offers a cost effective and reliable
solution.
The rectifier meets the requirements set by the telecommunications standards.
Features
• Efficiency ≥ 91%
• Compact (500 W / l) and light (4.4 kg)
• Hot pluggable, all connectors at the rear
• Fan cooled with air flow monitoring
• Wide input voltage range: 88 - 276 V
• Power factor ~ 1.0 (sinusoidal input current)
• Constant output power characteristic
• Analogue system bus
• Operating temperature range up to 70°C
rms
Specification
General
Product name FR 48 V - 2000 W - E
Efficiency
Losses, max. 200 W
Safety EN 60 950, class I
UL 60 950
CAN / CSA – C22.2
EMI, radiated compliant with EN 55 022, class B
EN 300 386-2
Cooling Fan cooled
Power density 500 W / l 8.2 W / in
Input
Voltage range 88 ... 276 V
Volt. range, red. power 88 ... 184 V
Current maximum 12 A
Line current Meets IEC 1000-3-2
THD < 5 %
EMI, conducted EN 55 022, class B
Output
Voltage, nominal 53.5 V
Voltage adjust range 42 ... 58 V
Voltage error, static ± 250 mV
EMI, conducted compliant with EN 55 022, class A
Current limit, nominal 46.5 A
Limit adjustment range 0 ... 46.5 A
Load sharing < ± 3 A
Power limit 2000 W, fixed
Mechanics
Width, overall 2.6” / 65 mm
Depth, overall 13.6” / 346 mm
Height, body 7.9” / 200 mm
Weight 9.7 lb / 4.4 kg
Environment
Ambient temperature -25 ... + 70 °C
Reduced power 60 ... + 70 °C
Relative humidity 95 % max, non cond.
Accessories
Single back plane P/N: D0100298
≥
91 %
3
rms
rms
rms
dc
dc
dc
dc
dc
dc
Loading...