Delta Electronics DTE-20T User Manual

DTE Accessory

Instruction Sheet

Thank you very much for choosing DTE-20T. Please read this instruction sheet before using your DTE-20T to ensure proper
operation. Keep this instruction sheet handy for quick reference.

 Warning

1. Please hold the plastic terminal when installing DTE-20T to prevent electrostatic discharge (ESD).

2. Prevent dust or metallic debris from falling into the device and cause malfunction. DO NOT
without being permitted. DO NOT

3. When installing DTE-20T, please make sure the power of DTE main unit is switched off and insert DTE-20T into the correct
slot on DTE main unit.

4. Make sure you install DTE-20T correctly before switching on the power; otherwise serious damage may occur.

5. DO NOT

touch the terminals or repair the device when the power is on; otherwise an electric shock may occur.

use empty terminals.

 Functions & Electrical Specifications

modify or uninstall DTE-20T

Power consumption Max. 0.5W

Input sensor 4 channels of thermocouple: K, J, T, E, N, R, S, B, L, U, TXK

Sampling cycle Thermocouple: 1.0 second (4 channels)

Terminal connection

Can only be inserted into INB slot on DTE10T main unit

 The sensor slot (INA/INB) only accepts the same input type. For example, if you select DTE-20T as accessory, you can only

use it on DTE-10T main unit.

 How to Install

1 Remove all the terminal

blocks on the panel.

2 Uncover the panel. Make

sure which slot is the
correct one and insert
DTE-20T into the slot.

3 Cover up the panel. 4 Insert the terminal blocks

back

The content of this instruction sheet may be revised without prior notice. Please consult our distributors or

download the most updated version at http://www.delta.com.tw/industrialautomation