08/19
> 3s
4
TYBOX 217 - 227 - 237 - 327 - 337
www.deltadore.com
Press me /
Program «Once» /
PROG
Weekly programming /
PROG
x7
2 daily programs (week + week-end) /
PROG
5+2
AUTO
P2 P3 P4 P5 P6
P1
20°C 20°C 20°C
16°C 16°C
Turn the selector dial to AUTO.
Your thermostat follows the programme.
Depending on the conguration during installation,
your device will constantly display the temperature
setting or the room temperature. To change these
settings, refer to the»installation guide» or contact
your installation engineer.
18°C 18°C
6.00
8.00 11.00 13.00
17.00
23.000.00
PROG
P1
16°C 16°C
6.00
TYBOX follows the program «Once».
20°C
P6
23.000.00
Important product
information (❷❹)
Information button
i
In AUTO mode, pressing the i button displays the room temperature or the temperature setting,
depending on the conguration during installation.
Room temperatureSet-point temperature
TYBOX 3x7
023
Operating hours counter (boiler)
h (ON)
Interval before maintenance
of the boiler
Return to
automatic mode
Time setting
31
2
1
3
1
Turn the selector dial to .
The days ash.
12
23
4
1
5
2012 ...
6
7
8
0
9
Repeat the process to set
the hours and minutes.
Press + or - to select the day, then press OK
to conrm and move on to the next setting.
59
10
0
11
EXIT
This mode protects your home from frost if you are absent for several days.
Turn the selector dial
Enter the return date
31
1
Conrm
To change the mode in progress, press OK again.
To cancel the current absence mode, turn the selector dial.
and enter the return date.
The Frost Protection
setting is adjustable
15°C
5°C
Conrm
The Frost Protection
setting is adjustable
(§ «Setting
temperatures»).
Countdown
18/02/2012
00.00
Return to AUTO
mode at the end of
the countdown, at
00:00.
STOP
This mode is used to switch your heating
installation off. Turn the selector dial to .
In this mode, the device displays the room
temperature.
PROG
1
PROG x7
The programme may be weekly (PROG x7) or
daily (PROG 5+2). This choice is made using the switch
3
PROG x 7
A
B
PROG 5+2
on the back of the device.
This programming can also be done in one-hour,
half-hour, or quarter-hour stages.
If you wish to change these settings, refer to the
«installation guide» or contact your installation engineer.
2
E.g.
P2 P3 P4 P5 P6
P1
19°C 20°C 20°C
16°C 16°C
18°C 18°C
6.00
8.00 11.00 13.00
17.00
23.000.00
Programming can be done for one-hour, 30-minute or 15-minute
time slots (see «installation guide», menu 1-02).
The program can be modied for each day.
7
2
1
3
1
Use the + and - buttons to make your choices.
Press OK to conrm and move on to the next setting
P6
P1
4
5
Periods 2 to 5 can be disabled.
e.g. disabling of the midday slot (periods 3 and 4).
❶ Select the programme stage to be disabled
(e.g.: P3)
❷ Repeatedly press the - button until the display
shows «--:--»
❸ Conrm by pressing OK.
Repeat the operation for each time slot of
the programme that you wish to disable.
23:45
6
00:00
7
30°C
5°C
9
8
❶ ❷ ❸
P2 P3 P4 P5 P6
P1
20°C 20°C
16°C 16°C
18°C 18°C
6.00 8.0011.00 13.00
17.00
23.000.00
OR
>3s
COPY
EXIT
PROG 5+2
1
PROG
P1
16°C 16°C20°C
7.00
1
6/7
1...5
2
Conrm and continue on to the next day to program
2
2 daily programmes: week (1 to 5) + weekend (6 and 7).
1 single programme for the 5 weekdays.
it separately or conrm the program and copy it to
the next day.
1 single programme for the weekend.
3
To change the programme, see above.
EXIT
To exit the mode,
turn the selector dial.
P6
23.000.00
To apply a simplied program (two programmable periods, P1 and P6). This program can be modied.
P6
P1
23:45
3
00:00
30°C
5°C
23:45
00:00
❶ Turn the selector dial to PROG
❷ Press the - button to display the ashing symbol
Congure the «day at home» programme using the + and - buttons,
then press OK to conrm and move on to the next setting.
❸ Conrm by pressing OK
Override
From AUTO mode or the «day at home» programme
Allows a given temperature setting to be applied until the next change of programme.
AUTO
13.54
P2 P3 P4 P5 P6
P1
21°C
16°C
17.00 23.000.00
16°C
20°C 20°C 20°C
18°C
6.00
8.00 11.00 13.00
PROG
P1
16°C 16°C20°C
7.00
13.54
P6
18°C
23.000.00
EXIT
To exit the mode,
turn the selector dial.
When the batteries symbol appears. you have
approximately 1 month to change the batteries
(2 1.5 V LR03 or AAA alkaline batteries).
Alkalines 1,5V
1
3
2
4
You have approximately 30 seconds to change
the batteries before the time setting is reset
(if this happens, reprogramme the date and time).
LR03 (AAA)
Loading...