Delta Childrens Products Portable Crib Assembly Instruction Manual

MAY 12, 2015, 4472 , R0 ©2015 DELTA ENTERPRISE CORP.

Portable Crib

Consumer Care:

www.DeltaChildren.com

Delta Children’s Products

114 West 26th Street
New York, NY 10001

Tele.212-645-9033

Need Help?

Please visit www.DeltaChildren.com/assembly-videos to
watch our easy and effective assembly videos

Conforms to

ASTM F406

Safety Standards

Style #:

Lot:

Date:

___________
___________
___________

A

REV

This product is not intended for institutional or commercial use.
Este producto no esta hecho para uso institucional o comercial.

Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.

ADULT ASSEMBLY REQUIRED

Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.

When contacting Delta Consumer Care please reference the above information. Before contacting Delta
Consumer Care please ensure that the information above matches the information found on the label on
the Crib End bottom rail, please reference the information found on the product when contacting Delta
Consumer Care.

To register your product for important safety alerts and updates to your product please visit
www.DeltaChildren.com and click on Product Registration.

2

ANY MATTRESS USED IN THIS CRIB MUST
BE AT LEAST 36 7/8 INCHES LONG BY 22 3/8
INCHES WIDE AND NOT MORE THAN 2
INCHES THICK.

CAUTION:

WARNING:

INFANTS CAN SUFFOCATE

*In gaps between a mattress too small or too thick and product sides.

*On soft bedding. Never add a mattress, pillow, comforter or padding.

Use only the mattress provided by Delta Children’s Products. (Which must be at least 36 7/8 inches

long by 22 3/8 inches wide and not more than 2 inches thick.)

Failure to follow these warnings and the instructions could result in serious injury or death.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,

unless otherwise advised by your physician.
*STRINGS CAN CAUSE STRANGULATION! Never place items with a string around a child's neck,
such as hood strings or pacifier cords. Never suspend strings over product or attach strings to toys.

*The product, including side rails, must be fully erected prior to use.
*Never place product near a window where cords from blinds or drapes can strangle a child.
*When child is able to pull to a standing position, set mattress to lowest adjustment position and remove

bumper pads, large toys and other objects that could serve as steps for climbing out.
*Discontinue use of the product when child is able to climb out or reaches the height of 35 in. (890 mm).
*Never use this product if there are any loose or missing fasteners, loose joints or broken parts. Check
before assembly and frequently during use. Contact Delta Children’s Products for replacement parts.

Never substitute parts.
*Never use a water mattress with this product.

*If refinishing, use a non-toxic finish specified for children's products.
*Never use plastic shipping bags or other plastic film as mattress covers not sold and intended for that
purpose. They can cause suffocation.
*Ensure a safe environment for the child by checking regularly, before placing the child in the product,
that every component is properly and securely in place.
*To avoid head injury, do not allow any child to play underneath the product.
*Always provide the supervision necessary for the continued safety of your child. When used for
playing never leave child unattended.
*Child can become entrapped and die when improvised netting or covers are placed on top of product.
Never add such items to confine child in product.

*

Never add an accessory such as a bassinet or changing table that extends over the sleeping

area.

*Replace Teething rail if damaged, cracked or loose.

WARNING:

3

A. Left Headboard x 1

B. Right Headboard x 1

E. Mattress Board x 1

F. Mattress Pad x 1

PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT.

C. Back Rail x 1

D. Front Rail x 1

4

PARTS:

K. Wrench x 1

HARDWARE KITS.

G. 1/4” x 51 mm Bolt x 8

L. Caster x 4

H. 1/4” x17mm Barrel Nut x 8

J. 1/4” Nut x 2

Flat Head Screwdriver
not supplied

Phillips Screwdriver
not supplied

Required Tools

No drills necessary.
Do not use power
screwdriver.

5

Section 1: Crib Assembly
Step 1

Parts and tools required to complete step.

A. Left Headboard x 1

B. Right Headboard x 1

C. Back Rail x 1

G. 1/4” x 51 mm Bolt x 4

H. 1/4” x17mm Barrel Nut x 4

Attach (1) Left Headboard (Part A) and (1) Right Headboard (Part B) to (1) Back Rail (Part C) using
(4) 1/4” x 51 mm Bolts (Part G) and (4) 1/4” x17mm Barrel Nuts (Part H). Tighten with the Phillips
Screwdriver. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.

G

G

A

H

C

B

H

H

H

G

G

6

Section 1: Crib Assembly
Step 2

Parts and tools required to complete step.

BOTH ENDS

E

J

J

E. Mattress Board x 1

K. Wrench x 1

J. 1/4” Nut x 2

Attach (1) Mattress Board (Part E) to the assembly from step 1 using (2) 1/4” Nuts (Part J), Tighten
with the Wrench (Part K).

K

D. Front Rail x 1

From Step 2

7

Section 1: Crib Assembly
Step 3

Parts and tools required to complete step.

G. 1/4” x 51 mm Bolt x 4

H. 1/4” x17mm Barrel Nut x 4

Attach (1) Front Rail (Part D) to the assembly from step 2 using (4) 1/4” x 51 mm Bolts (Part G) and
(4) 1/4” x17mm Barrel Nuts (Part H). Tighten with the Phillips Screwdriver. Use the Flat Head
Screwdriver to hold the Barrel Nut in the proper alignment.

G

G

D

D

G

H

H

H

G

H

G

H

L

L

L

From Step 3

8

Section 1: Crib Assembly
Step 4

Parts and tools required to complete step.

L. Caster x 4

Insert the (4) Casters (Part L) into the Legs of the Crib. Attach each Caster by pressing firmly until
it “Snaps” into place. Do not insert the Casters by pounding the ends of the Crib on the floor, this
will damage the unit.

F. Mattress Pad x 1

F

ALL CORNERS

F

E

9

From Step 4

Section 1: Crib Assembly
Step 5

Parts and tools required to complete step.

Place the Mattress Pad (Part F) onto the Mattress Board (Part E) as shown.

Push handle to the left release to Mattress Board.

Lift Mattress Board.

10

Section 2: Adjusting Mattress Board Height
Step 1

Step 2

11

Section 2: Adjusting Mattress Board Height
Step 3

Step 4

Snap in handle to secure Mattress Board.

Lower Mattress Board.

Push in Mattress Board wires.

12

Section 3: Folding Portable Crib
Step 1

Step 2

Push handle to the left release to Mattress Board.

13

Section 3: Folding Portable Crib
Step 3

Step 4

Warranty: This Delta Crib is warranted to be free from defects for a period

of 1 year from the date of purchase under normal use. This warranty extends
only to the original retail purchaser and is valid only when supplied with proof of
purchase, or if received as a gift, when the registration is on file with Delta.

Please do not return this item to the store before contacting
us about missing parts or with any questions.

To register your product for important safety alerts and updates to
your product please visit www.DeltaChildren.com

To report a problem, please log on to www.DeltaChildren.com and
click the Consumer Care Tab, or contact us by phone at
[phone].

In the event that you need to contact our customer service
department please have the Style Number and Lot Number available.
Use the space below to make note of those numbers. They can be
found on the label on the Crib End bottom rail.

Lot No. : _______________________

Pack Date:_____________________

Date of Purchase: _____________

(you should also keep your receipt)

COLOR

FTY

REV

STYLE No: 4472

A

Consumer Care:

www.DeltaChildren.com

Delta Children’s Products

114 West 26th Street
New York, NY 10001

Tele.212-645-9033