2
PARTS
NOTES ON ASSEMBLY:
-During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on
the diagram of the item which is drawn actual size and design. Be sure to use the proper size and
shape specified in the instructions.
-To assemble this unit you may be required to place the unit on it’s side and face. It is strongly
recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.
NOTES ON CARE AND MAINTENANCE:
- Do not scratch or chip the finish.
- Inspect the product periodically, contact delta children's products for replacement parts or questions.
- Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a
damp, cold basement. These extremes can cause a loss of structural integrity.
-To preserve the luster of the high quality finish on your product, it is recommended to place a doily or
felt pad under any items you place on the finish.
-Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
-Do not use abrasive chemicals.
-Do not spray cleaners directly onto furniture.
-Lift slightly when moving on carpeting to prevent leg breakage.
-Use of a vaporizer near furniture will cause wood to swell and finish to peel.
Allen Wrench
A. Left Side x1
Part #21846
B. Right Side x1
Part #21847
C. Top Step x1
Part #21848
F. Center Partition x1
Part #21851
D. Step x1
Part #21849
G. Storage Shelf x1
Part #21852
M. 30mm Wood
Dowel x14
N. Barrel
Nut x8
E. Back Rail x1
Part #21850
H. 50mm Bolt x8
K. 25mm Bolt x2
HARDWARE KIT PART: #21856 FOR COLOR 100, #21855 FOR COLOR 260,
#21853 FOR COLOR 604. SEE FRONT COVER.
PHILLIPS SCREWDRIVER
NOT SUPPLIED