Page 1
Toddler to Twin Carriage Bed
BB86983PS Toddler Bed • BB87191PS Twin Bed
WARNING:
THIS ITEM REQUIRES ASSEMBLY BY AN ADULT BECAUSE OF SMALL PARTS. CARE SHOULD BE TAKEN IN UNPACKING AND ASSEMBLY OF THIS PRODUCT.
Page 2
Toddler Bed Parts: HARDWARE SET FOUND IN TODDLER BED BOX
BENCH PARTS
G
H
TO FULLY ASSEMBLE THE
TODDLER BED YOU WILL NEED
A
(2) Side Panel Female (2) Side Panel Male
(2) Side Rail Connector Straps
M
(1) Fabric Bin
(1) Fabric Bin Base
N
C
(2) Headboard/Footboard
Panel (headboard side view)
S
(1) Canopy Pole Base Left
(1) Canopy Pole Base Right
Twin Bed Parts: HARDWARE SET FOUND IN TWIN BED BOX
A
C
K
L
E
(1) Left
Panel
I
(1) Seat Panel
(2) Canopy Pole Top
BENCH PARTS
G
(1) Right
Panel
J
H
16 x 1” Length
8 x 1.5” Length
8 x .5” DIA.
4 x .5” DIA.
TO FULLY ASSEMBLE THE TWIN BED
YOU WILL NEED
28 x 1” Length
(2) Side Panel Female (2) Side Panel Male
B D
(2) Headboard/Footboard
(1) Side Panel Extender
(2) Side Rail Connector Straps
M
(1) Fabric Bin (1) Fabric Bin Base
Panel Left Extender
N
(2) Headboard/Footboard
(2) Headboard/Footboard
Panel Right Extender
S
(2) Canopy Pole Top
E
Panel
J
(1) Left
Panel
F
(1) Seat Panel
(1) Canopy Pole Base Left
(1) Canopy Pole Base Right
(1) Right
Panel
I
8 x 1.5” Length
8 x .5” DIA.
4 x .5” DIA.
K
L
2
Page 3
Stickers
• Please apply all stickers on individual parts before assembly.
• For best results, place individual parts on a flat surface before applying stickers and acrylic jewels.
A2
C2
(24) (2)
E1
A1
B1 B2
C1
(2) (2) (2)
E2
E3
(1) (1) (1)
E4
E5 E5
E6
(2)(1) (4 Jewels) (12)
A3
C3
D1
E7 F1
3
Page 4
Canopy Drapings
(1 Toddler Center Draping)
O R
P
(1 Left Side Draping)
Q
(1 Twin Center Draping)
(1 Right Side Draping)
4
Page 5
1 Apply all decals
A C
D1
A1
B1 B2
C1
B
A2
A2 x 6 C2 x 6
A3
D
E5 x 2
E5 E6
E
E1
F
E5 x 2
E5 E6
E
C2
D
F1
E7
E4
E7
D1
C3
F
F1
D1
Alternate Headboard Decal
E3
F1
D1
E7 E7
E2
F1
5
Page 6
2 Assemble Bench
G
I
• Align seat with slots in bench sides
• Slide into place
2A 2B
H
• Make sure seat is all the
way to the front and
screwholes on sides line up
2C
• Turn flap down so it
sits flat across the
back of the seat.
2D
4 x 1”
6
Page 7
3 Toddler Bed Assembly
C
A
3A
• Insert Panel C into Panel A for both sides
3B
4 x 1”
• Insert Panel E latch hooks into both left/right
side panel grooves
• Slide downward into a fully locked position
E
E
3C
3D
1
2
4 x 1.5”
7
Page 8
• Align pole top
with pole base
J
3F 3G
4 x .5”
3E
K
L
4 x 1”
• Align pole base with slots in
side panels on back of headboard
3H 3I
• Slide into place until poles are flush with sides
4 x .5”
4 x 1.5”
8
Page 9
3J 3K
• Align bench to footboard (Panel E)
9
Page 10
3M3L
PLEASE NOTE:
Straps are only to keep
bed sides taut. They are
NOT a mattress support.
R
This is NOT
S
a screwhole.
Do not use.
• Use these screw tabs for toddler bed setup
R
•Align screwtab openings on straps to screwholes in sides
• Use screws and washers to securely attach straps to both sides
R
4 x .5”
4 x 1”
10
Page 11
3N 3O
Skip to Section 5 to attach canopy draping
11
Page 12
4 Twin Bed Assembly
• 1) Insert Panel B into Panel A for both sides
• 2) Insert Panel C into Panel B for both sides
C
B
4B
4A
2
D
A
8 x 1”
1
4D
F
E
4C
• Insert Panel D into Panel E
• Insert Panel F into Panel E
8 x 1”
12
Page 13
4E 4F
1
2
• Insert Panel F latch hooks into side Panel C grooves for both sides
• Insert Panel D latch hooks into side Panel A grooves for both sides
4 x 1.5”
13
Page 14
• Align pole top
with pole base
4H 4I
4 x .5”
4 x 1”
4G
• Align pole base with slots in side panels
4J 4K
4 x .5”
• Slide into place until poles are flush with sides
4 x 1.5”
14
Page 15
4L 4M
• Align bench to footboard (Panel E)
15
Page 16
4O4N
R
PLEASE NOTE:
Straps are only to keep
bed sides taut. They are
NOT a mattress support.
This is NOT
S
a screwhole.
Do not use.
• Use these screw tabs for twin bed setup
R
R
•Align screwtab openings on straps to screwholes in sides
• Use screws and washers to securely attach straps to both sides
4 x .5”
8 x 1”
16
Page 17
4P
4Q
4R
Go to Section 5 to attach canopy draping
17
Page 18
5 Canopy Draping
5A 5B 5C
J
O
R
P Q
• Attach top of Drape O to top
of (1st) Pole J with velcro close
• Repeat both steps to attach Drape R to (2nd) Pole J.
• Attach middle of Drape O to top
of (1st) Pole J with velcro close
•Choose correct size of Center Drape P (Toddler) or Drape Q (Twin) for bed.
•Attach to Drape O with velcro close.
• Then attach to Drape R with velcro close.
•Fluff fabric on Drapes O and R to adjust fall of fabric to finish.
18
Page 19
6 Fabric Storage Bin
6A 6B
M
N
M
• Fully expand Fabric Bin • Insert Bin Base (N) to stabilize.
19
Page 20
20
Page 21
TODDLER BED WARNING
WARNING
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between bed parts can entrap head and neck of a small child.
NEVER use bed with children younger than 15 months.
ALWAYS follow assembly instructions.
The maximum user weight is 50lbs (22.7kg)
WARNING
STRANGULATION HAZARD
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
NEVER suspend strings over a bed.
NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords,
around a child's neck. These items may catch on bed parts.
CAUTION
ENTRAPMENT HAZARD
To avoid dangerous gaps, any mattress used in this bed shall be a full-size crib mattress
at least 51 5/8 in. (1310mm) in length, 27 1/4 in. (690mm) in width, and a max thickness
of 6 in. (152mm).
DO NOT
use this bed without a mattress.
• Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
• The user's maximum weight shall not be greater than
50 LB (22.7 kg).
• DO NOT use for infants. This toddler bed is intended
for a child between 15 months and 5 years of age.
• DO NOT use a water mattress with this toddler bed.
• Toddler bed must have more than 12 inches of space
between the toddler bed and
solid objects such as a wall or dresser. Child could slide
into small spaces and suffocate.
ASSEMBLY
• IMPORTANT! Before assembly, inspect toddler bed
for damaged hardware,loose joints,
missing pieces or sharp edges.
• DO NOT use bed if any parts are missing or
damaged.
• DO NOT substitute parts.
• If you are without an instruction sheet, DO NOT use
this product. Call (212) 645-9033
or fax (212) 645-9032.
TWIN BED WARNING
WARNING
Never use in the twin bed configuration with children younger than 2 years old.
Infants who cannot get in and out of a twin bed without help can be trapped in gaps
formed between the mattress and the wall or parts of the bed and suffocate.
ASSEMBLY
• IMPORTANT! Before assembly, inspect twin bed for damaged hardware,loose joints,
missing pieces or sharp edges.
• DO NOT use bed if any parts are missing or damaged.
• DO NOT substitute parts.
• If you are without an instruction sheet, DO NOT use this product. Call (212) 645-9033 or fax (212) 645-9032.
Care And Maintenance
To clean bed frame, use only household soap or detergent and warm water. NO BLEACH.
© Disney
Visit www.disneyprincess.com
21
Loading...