Delta Upright Stroller Owner's Manual

Upright Stroller

Owner’s Manual

www.deltachildrensproducts.com

08V0

Avoid serious injury from falling or sliding out. Always use seat belt. Your
child’s safety depends on you. Proper stroller use cannot be assured unless you
follow these instructions. DO NOT USE STROLLER UNTIL YOU READ AND
UNDERSTAND THESE INSTRUCTIONS.

IMPORTANT SAFETY INFORMATION

• NEVER LEAVE YOUR CHILD UNATTENDED WHILE IN STROLLER.
Accidents can happen quickly while your back is turned. You must always keep
your child in view while your child is in the stroller, even when sleeping. Your
child may become tangled in straps or pads and suffocate.

• Always use restaint system to keep child from standing up or falling out of
the stroller.

• Always balance the weight of the stroller evenly. To prevent the stroller from
becoming unstable or tipping:

• Do not allow children to play with or hang onto the stroller.

• Always lock the stroller open before allowing your child in or near the stroller.
This prevents injuries caused by the stroller collapsing.

• Only use this stroller with children who weigh less than 35lbs. (15.88kgs).
Use by larger children may damage the stroller, or cause a hazardous unstable
condition to exist.

• Always set the wheel brakes when stroller is not moving, especially on an
incline. This prevents the stroller from rolling away.

• Never use this stroller on stairways or escalators.

• This is not an exercise stroller!
Do not use this product while runing, jogging, in-line skating or participating in
other athletic activities.

• Only use this stroller if child can hold head up unassisted.

• Maximum weight capacity of storage basket is 3 lbs. Placing excessive
weight in the stroller bag or addidng other package carrying accessories may
cause a hazardous unstable condition.

Care and maintenance

• To clean, use only a damp cloth or sponge. Wipe plastic parts with a damp
cloth using mild soap.

• To keep your stroller running smoothly and avoid squeaking wheels use a
silicone or graphite based lubricant.

• When storing stroller, never stack other items on top of it. This may damage
the stroller.

• Check your stroller for loose screws, worn parts, torn material or stitching on
a regular basis. Repair or replace parts as needed.

• Discontinue use of the stroller should it malfunction or become damaged.
Please contact our customer service department for repair or to obtain
replacement parts.

08V0

Parent Tray

Child Tray

ASSEMBLY

Screws

(2)

Canopy

Back Wheel

Assembly

Front Wheels

(2)

Check that you have all the parts shown before assembling your product. If any parts

are missing, please call customer service.

STEP 1

Remove stroller from the box and

clear away from plastic bag and

protective foams.

Press the red button on each

side of the handle to adjust the

level of the handle.

To open stroller, pull handle

upward toward you until you

hear a click.

08V0

STEP 2

INDIVIDUAL FRONT WHEELS &
BACK WHEEL ASSEMBLY

To insert front wheels, align the wheel to

the front leg of the stroller and insert

wheel until you hear a click. Then pull

downward on wheel to check and make

sure wheels are securely fastened.

Repeat on the other side.

STEP 3

INSERTING CANOPY & PARENT TRAY

fig. 1

Insert canopy support wire into the

opening slots on each side of the
stroller (see fig.1). Once inserted

rotate back into position.

Turn the stroller upside down, align the

back wheel assembly to the back legs of

the stroller. Insert the wheel housing onto

the stroller legs until you hear a click.
Make sure the brake locks are facing

towards adjustable handles.

fig. 2

Insert middle canopy wire

supports under the adjustable handle

housing (see fig.2).

Screw canopy wire support onto

frame to secure the canopy

(see fig.3). Repeat on the other

side. Locate on the canopy 4

hook and loops to secure

canopy onto the stroller.

fig. 3

Snap parent tray

onto the frame

(see fig.4). Pull

upward to make

sure is secured

in place.

fig. 4

Inside snap

08V0

STEP 4

fig. 1

INSERTING CHILD TRAY

Flip the child tray upside down and

align the snap and lock button to the

side of the tray tube as shown on fig. 1.

Insert the tray onto the tray support

tube until you hear a click.

fig. 2

Once the child tray is securely inserted

and fastened onto the tray tube, rotate the

child tray into a locked position (shown in

fig.2). To open, press the button lock and

rotate tray upward.

STEP 6

STEP 5

BACK SEAT RECLINING

Press button on cord housing and pull away to recline
seat, as shown in fig. 1.
To return to an upright position, hold cord loop while

fig. 1

moving cord housing towards the backseat.

ATTACHING CAR SEAT

To use the car seat feature, lock back
wheels and recline the back seat to its
lowest point and fold canopy closed. Align
car seat as shown in fig.1. Angle feet first,
while lowering car seat

fig. 1

into a locked position
on the child tray.

fig. 2

(car seat attached and locked

to child tray)

car seat

front locks

Final step to secure car seat onto

the stroller, turn and lock red

latches (fig.2). Check that car seat

is securely attached by pulling up

on the car seat handle. To remove,

undo latches and unlock car seat

from childtray.

08V0

STEP 6B

ATTACHING EVENFLO© CAR SEAT

To use the EVENFLO© car seat feature, lock back
wheels and recline the back seat to its lowest point
and fold canopy close. Align car seat as shown in
fig.1. Angle feet firts, while lowering car seat into a
locked position on the
child tray.

fig. 1

fig. 2

Final step to secure car seat onto the stroller, wrap elastic webbing cord around

are seat hook (fig.2). Secure webbing with the hook and loop. Check that car

seat is securely attached by pulling up on the car seat handle. To remove, undo

latches and unlock car seat from childtray.

08V0

STEP 7

TO SECURE BABY

Place child in the stroller

seat and bring the seat

belt around child’s waist.

Place the crotch strap

between the child’s leg.

Pull strap to

adjust size to

best fit your child.

To fasten seat belt buckles

snap buckles together.

Be sure both buckles are

fastened to secure child safety.

To release seat belt buckles -

press center tab and pull apart.

STEP 8

FOLDING STROLLER

When closing stroller, the seat should be in an upright
position. Grip onto the stroller handle, placing thumb

fig. 1

fig. 2

on the red button (fig.1). Shift button to the right and
at the same time, rotate hand upward
(fig. 2). This will allow the stroller to fold in an upright
position (fig.3).

fig. 3

Lock storage latch
on side of stroller.

08V0